Electrical Specifications

Power Output

X-1000B
1KW (rated), 1, 200 (capable).

X-500B
500 Watt Rated, 600 (capable).

 
Continuously adjustable

 
Three power level presets

Frequency Range
530kHz to 1700kHz

Output Impedance
50 ohms unbalanced, Type PL259

Modulator Type
Pulse Duration Modulation (PDM)

Audio Frequency Response
+- 0.5db, 30-10, 000Hz

Square Wave Overshoot
2% at 400 Hz

Square Wave Tilt
3% or less at 40Hz

Audio Harmonic Distortion
Better than 1%(THD) at 95% modulation 30-10, 000Hz (reduced antenna bandwidth may degrade specifications)

Audio Intermod
% or less at 1KW 60/7000Hz 4:1ratio SMPTE Standards Distortion at 85% modulation

Modulation Capability
150%(rated) 165% (capable)

Carrier Shift
Not to exceed 1%

RF Harmonics
73d B or more below 1KW

Spurious Outputs:
73 dB below 1KW

Noise and Hum
60db or more below 100% modulation at 1KW

Frequency Stability
+-5 ppm

Audio Input
600 ohms active balanced +10dBm nominal

Power Input:
190-260 VAC, single phase

Power Consumption: X-1000B
1400 Watts at 1KW 0% modulation

 
1750 Watts at 1KW, 100% continuous sine wave modulation

                                       X-500B
600 Watts at 500W 0% Modulation

 
900 Watts at 500W 100% continuous sine wave modulation

Remote control/monitor
DB25 Connector

Mechanical and Environmental Specifications

Ambient Temperature
-10°C to 50°C

Humidity Range
95% max, non-condensing

Altitude
8, 000 feet

Size
12.25" high x 19" wide x 20" deep

Weight
X-1000B 132lbs // X-500B 98lbs