RVR TEX100LCD/S

The RVR TEX100LCD/S offers high quality at a very attractive price.

Ideal for use as an exciter in a compact and modular system.

On the RVR TEX100LCD/S front panel, by means of a user-friendly graphic interface, all the diagnostic and control parameters are displayed (frequency, output power, etc…)

Adjustable power output from 0 to 100 W with any VSWR conditions, thanks to FOLD-BACK control of both forward and reflected power. Power supply multi-voltage from 80 to 260 V directly without selector.

Meets or exceeds all FCC and CCIR requirements. Low cost with high performance. Composed of only 4 modules easy replaceable, allowing the realignment of equipment with an almost total absence of adjustments.

SMD technology circuits for maximum reliability and minimum encumbrance with optimum signal routing.Available with 2 x SCA/RDS input connectors.

Main parameters are available also on the terminal board for remote control. Built-in stereo coder with high

check out other FM Transmitters.

Follow our Facebook page for daily updates and suggestions.

  • PRIMARY APPLICATION: High quality at a very attractive price. Ideal for use as exciters in compact and modular system.
  • HARDWARE FEATURES: Compact, non-deformable and light thanks to the stainless steel chassis, in 2 rack units only.
  • USER-FRIENDLY FEATURES: Universal 80-260 V multi-voltage power supply enables operation without preselect voltage. Four pushbuttons for user/device interaction and software that offers a simple, intuitive interface.
  • RELIABILITY/CONTINUITY: APC (Automatic Power Control) and Foldback protection ensure reliable operation under any operating conditions.
  • AUDIO PERFORMANCE: Low distortion and intermodulation values and a high noise/signal ratio.
  • OPERATING EFFICIENCY: Incorporate a PFC (Power Factor Corrector) power supply, that provides the utmost efficiency for enhanced energy saving and environmental protection, which ensure high efficiency across the bandwidth.
  • EASE OF MAINTENANCE: Advanced module engineering ensures extreme of access and simple maintenance.
  • INTERFACE CONTROL: Total control thanks to microprocessor easily programmed from menu with all key parameters displayed on LCD.
  • INPUT/OUTPUT INTERFACE: Built-in high-performance stereo coder, L&R analogue audio inputs, Mono inputs, MPX composite signal and auxiliary inputs for SCA / RDS signals.
  • RDS APPLICATION: Built-in RDS encoder with UECP standard functions (option).
  • REMOTE CONTROL: Built-in telemetry system via GSM modem, battery and battery charger or via WEB or via SNMP (option).
  • REGULATORY COMPLIANCE: State-of-the-art technology in full compliance with EC, FCC and CCIR standards.
Rated output power: 100W Frequency range: FCC - CCIR - OIRT – JPN Operating Modes: Mono, Stereo, Multiplex Modulation type: F3E Primary Power: 80 ÷ 260 Vac or 24 Vdc AC Power Consumption: 330 VA / 212W Physical Dimensions: (W x H x D) 483 x 88 x 394 mm Weight: 8.5 kg Environmental Working Conditions: -10 ÷ +50 °C / 95% relative Humidity non condensing Cooling: Forced, with an internal fan Frequency programmability: Via software, with 10 kHz steps Frequency stability: ±1 ppm Pre-emphasis modes: 0/50 (CCIR) ?S, 75 (FCC) ?S Spurious & harmonic suppression: <75 dBc (80 typical) Asynchronous AM S/N ratio: ? ?65 dB (typical 70) Synchronous AM S/N ratio: ? ?50 dB (typical 60) MONO OPERATION S/N FM Ratio: > 80 dB RMS (typical 83 dB) Frequency Response: < ± 0.5 dB 30Hz ÷ 15kHz (typical ± 0.2 dB) Total Harmonic Distortion: < 0.1 % 30 Hz ÷ 15 kHz (typical 0.07 %) Intermodulation distortion: < 0.02 % with 1 kHz and 1,3 kHz tones MPX OPERATION Composite S/N FM Ratio: > 80 dB RMS (typical 83 dB) Frequency Response: ± 0.2 dB 30Hz ÷ 53kHz / ± 0.5 dB 53kHz ÷ 100 kHz Total Harmonic Distortion: < 0.1% 30Hz ÷ 53kHz Intermodulation distortion: < 0.05% with 1 kHz and 1,3 kHz tones INTERNAL STEREO CODER OPERATION Stereo S/N FM Ratio: > 75 dB RMS (typical 77dB) Frequency Response: ± 0.5 dB 30 Hz ÷ 15 kHz Total Harmonic Distortion: < 0.05% 30 Hz ÷ 15 kHz Intermodulation distortion: ? 0.03% with 1 kHz and 1,3 kHz tones Stereo separation: > 50 dB 30 Hz ÷ 15 kHz (typical 55 dB) AUDIO INPUT CONNECTORS Left / Right XLR balanced: Impedance: 10 k or 600 ohms; Level: -13 to +13 dBu MPX: unbalanced/RDS BNC unbalanced; Impedance: 10 k or 50 ohms; Level: -13 to +13 dBu SCA/RDS: 2 x BNC unbalanced; Impedance: 10 k; Level: -8 to +13 dBu OTHER CONNECTORS RF Output: N (50 ohms) RF Monitor: BNC (- 30dBr referred to RF output) Pilot output: BNC (1Vpp) Interlock Input: BNC STANDARD COMPLIANCE EN 60215:1989 Safety EN60215/A1:1992-07 EN60215/A2:1994-09 EMC EN 301 489-1 V1.4.1 (2002-08) EN 301 489-11 V1.2.1 (2002-11) Radio EN 302 018-2 V1.2.1 (2005-06)
BW Price Guarantee

(Subject to conditions)

$1,965.00
$174.00
RVR$174.00
Suono$323.00
RVR$406.00
RVR$522.00
RVR$290.00

Tech Support

2-Year Warranty

$1,695.00

Related products
BROADCAST RVR TEX100LCD/S