Electrical•    24 VDC

70 Watt max. on 2.1mm barrel connector•    24 VDC Power supply (100-240 VAC) included
Ethernet•    10/100Mbps auto

•    RJ-45 connector with integrated Link/Activity LED•    Protocols: TCP/IP

UDP

RTP

SIP

DHCP

Multicast capable•    ES-100/spkr (Ethersound

output

no daisy-chain)support
Analog Output•    2 x 25 W (RMS @ 8 Ohm) speaker outputs

•    3.5 mm (1/8 inch) headphone jack

•    S/P DIF out (optical)

•    Output level software controllable•    Frequency response (-3 dB) 19 Hz .. 20 kHz *•    Dynamic range 94 dB•    SNR/THD -94 dB

<0.05%)
Audio formats•    MP3 CBR/VBR

up to 320 kbps

8..48 kHz sample freq.•    AAC-HE (AAC

AAC plus

AAC plus V2)•    WMA (up to version 9)

•    Ogg Vorbis•    PCM linear 16bit @8

16

22.05

24

32

44.1

48 kHz•    G.711

uLaw

aLaw (sample rates same as PCM)

RS-232 Interface•    300..230‘400 Baud asynchronous

•    for serial tunneling or local control

•    12 VDC supply output for external devices (100 mA max.)IR Interface•    Built-in IR receiver

IR remote control included

•    Optional external IR receiver via serial port (IR Kit)Mechanical•    Aluminum case

460g•    rack and wall mountable using accessoriesDimensions (W x H x D)•    108 x 38 x 125 mm (4.25 x 1.5 x 4.92 inch)Model comparison•    Model 200 Speaker output 2 x 25 Watt on 8 Ohm

Memory USB •    Model 205 Speaker output 2 x 25 Watt on 8 Ohm

Memory MicroSD

Line inMTBF •    According MIL217F at 25°C•    Exstreamer 200 min. 460 000h•    Exstreamer 205 min. 410 000h*depends on used codec

best results @48kHz PCM

Technical Specification For PS-PLAY

Analogue Outputs:
2 x XLR 3 pin (balanced)( L&R)

 
2 x RCA phono (unbalanced)( L&R)

 
1 x ¼ inch (6.35mm) stereo jack headphone socket

Analogue Max Output Level:
18dBu XLR balanced

 
8dBu RCA phono unbalanced

Analogue Balanced Output Impedance:
<50Ω

Analogue Unbalanced Output Impedance:
<75Ω

Analogue Output SNR:
94dB

Frequency Response:
20Hz – 20kHz using MP3 at sample rate of 192kbps and above

Output THD:
0.03% Relative

Interchannel Isolation (Cross Talk):
80dB (Ref FSD)

Analogue Output Gain Range:
-60dB to 18dB via front panel control knob

or optional IR controller

Digital Outputs:
1 x AES/EBU XLR 3 pin female

 
1 x S/PDIF RCA phono

 
1 x S/PDIF RCA phono

Headphones Output:
Drives 150mW into 32ohm to 600ohm stereo headphones

USB Port:
1 x USB A socket

GPOs (General Purpose Outputs):
2 x switchable relay contacts (simultaneously switched) controlled from PS-SEND

Serial Port:
1 x 9 way D-type socket

used to send control commands and update firmware

Ethernet Port:
1 x RJ45 socket. Remote control commands can be sent via TCP or UDP as well as firmware updates.

IR Remote Receiver:
Remote commands can be sent using optional remote control via built in IR sensor

Mains Input:
Filtered IEC

85 – 264VAC

47 – 63 Hz

10W max

Fuse Rating:
Anti-surge fuse 1A 20 x 5mm

Audio Codec Specifications Decoder
G.711 (U Law/A Law 8kHz to 48kHz sampling rate)

 
WAV (IMA ADPCM+ 16bit PCM uncompressed: 8kHz to 48kHz)

 
MP3 Layer 1 (32

44.1 and 48kHz

CBR +VBR +ABR)

 
MP3 Layer 2 (16

22.05 and 24kHz

CBR +VBR +ABR)

 
AAC+ (HE-AAC v2 Level 3

incl.SBR and PS)

 
Ogg Vorbis (floor 1)

Supported Network Transport Protocols
RTP – UDP

 
HTTP – TCP

 
Raw UDP

 
Raw TCP

 
SNMP – traps for remote management

 
DHCP

BOOTP

IPZator or AUTOIP – Dynamic IP address resolution

 
SonicIP IP Address readout

Physical Specification
Dimensions (Raw):    22cm (W) x 13.7cm (D) x 4.3cm (H)

 
8.67” (W) x 5.39” (D) x 1.7” (H)

 
Dimensions (Boxed): 34cm (W) x 27cm (D) x 6cm (H)

 
13.4” (W) x 10.6” (D) x 2.4” (H)

 
Weight:                          Nett: 0.84kg Gross: 1.64kg

 
Nett: 1.85lbs Gross: 3.6lbs