Show sidebar
Show 10 15 20 25
Filters
-4%
Sonifex AVN-TB20AR 20-Way IP Talkback Intercom Front Panel

Sonifex AVN-TB20AR

In stock

Original price was: $ 4,191.51.Current price is: $ 4,004.44.
Add to Cart
Sale
The RFE Broadcast DS1000 FM Transmitter seamlessly integrates into existing FM broadcasting systems, offering SNMP and web-based remote control for real-time monitoring and configuration.

RFE Broadcast DS1000C

In stock

Original price was: $ 4,764.41.Current price is: $ 4,530.57.
Select options
Weight 10 kg
Dimensions 65 × 51 × 25 cm
Sale
The RFE Broadcast DS1000 FM Transmitter seamlessly integrates into existing FM broadcasting systems, offering SNMP and web-based remote control for real-time monitoring and configuration.

RFE Broadcast DS1000

In stock

Original price was: $ 5,138.55.Current price is: $ 4,530.57.
Select options
Weight 10 kg
Dimensions 65 × 51 × 25 cm
-10%

Belar SCMA-1

In stock

Original price was: $ 4,472.12.Current price is: $ 4,016.13.
Add to Cart
-14%
Sinteck EX-1020 FM Transmitter with Wideband Stereo Encoder

Sinteck EX-1020

In stock

Original price was: $ 4,670.88.Current price is: $ 4,021.98.
Add to Cart
-5%
Boost your FM station's power and performance today with the RFE Broadcast AS2000 FM Amplifier.

RFE Broadcast AS1000

In stock

Original price was: $ 4,249.97.Current price is: $ 4,033.67.
Add to Cart
Sonifex AVN-CU2-RAV 2-User RAVENNA Commentary Unit

Sonifex AVN-CU2-RAV

In stock

$ 4,039.52
Add to Cart
-5%
The Sonifex S0v2 is a high quality yet simple to operate radio broadcast mixer ideally suited to community radio stations, for educational purposes and for internet radio.

Sonifex S0v2

In stock

Original price was: $ 4,267.51.Current price is: $ 4,062.90.
Add to Cart
Weight 10.12 kg
Dimensions 68 × 44 × 25 cm
features

User friendly broadcast mixer.
Clear

,

simple layout with no jargon.
Designed for school & community radio.
Nine multi-function channel mixer.
Built in telephone interface.
Built in headphone volume limiter.
Large

,

simple LED volume display.
Remote output for fader starts.
Speaker muting when ‘Mics’ are on.
External mic-light switching output.
‘Programme’ and ‘record’ outputs.
‘Aux’ input for iPod or MP3 players.
Four microphone/line channels.
Four stereo line channels.
Switchable telephone/AUX channel.
Stereo USB audio to and from a PC.
Guest headphone ‘talkback’.
Reliable

,

low cost mixing solution.
Rack or flush mountable.
Integrated AC power supply.
specification

Technical Specification For S0

Mic Inputs Audio Specification

Input Impedance:
> 1k5Ω electronically balanced

Input Gain Range:
Preset pot +24dB to +67dB ref -50dBu

,

TRIM pot ± 15dB

Frequency Response:
40Hz to 20kHz –1dB

,

+0dB

Mic input E.I.N.:
-130dB with 150Ω source

Phantom Power:
+48V to each mic input (SCi selectable)

Common Mode Rejection Ratio:
> 60dB typically

Pan Range:
Off/-3dB Centre/Off

Stereo Line Inputs Audio Specification

Input Impedance:
> 20kΩ electronically unbalanced

Input Gain Range:
+10dB ref 0dBu at PGM output

,

TRIM pot ± 15dB

Frequency Response:
20Hz to 20kHz –0.5dB

,

+0dB

Noise (20Hz-20kHz):
-92dBu ref 0dB (fader down

,

no routing)

Total Harmonic Distortion:
0.015% at 1kHz

,

0.015% at 10kHz ref +8dBu

Balance Range:
± 6dB

Outputs Audio Specification

Output Impedance:
PGM output: < 50Ω electronically balanced

REC output: < 75Ω unbalanced Monitor output: < 75Ω unbalanced

Headphone output load: > 16Ω

,

recommended 250Ω

Maximum Output:
PGM output: +26dBu balancedREC output: Level:+16dBu unbalanced

Input & Output Connections

Audio Inputs:
4 x Microphone XLR-3 pin sockets

12 x Pair stereo line RCA phono sockets

1 x Pair stereo aux RCA phono sockets

1 x Stereo aux 3.5mm jack socket

Audio Outputs:

PGM:
2 x XLR-3 pin plug (balanced)

REC:
1 x Stereo pair RCA phono sockets

Monitor Inputs:
1 x Stereo pair RCA phono sockets

Monitor Outputs:
5 x 6.35mm (1/4”) stereo jack sockets

(2 x presenter

,

2 x guest

,

1 x loudspeaker)

Remote Outputs:
9 x 6.35mm (1/4”) stereo jack sockets (one per channel)

1 x 6.35mm (1/4”) stereo jack socket for light control

Telephone:
2 x RJ11 6/4 (1 x line

,

1 x handset)

USB Audio:
1 x Type-B receptacle

USB Serial:
1 x Type-B receptacle

Mains Input:
Filtered IEC

,

continuously rated 85-264VAC

,

47-63Hz

,

45w nominal

,

50w peak

Fuse Rating:
Anti-surge fuse 2A 20 x 5mm

Equipment Type

S0:
S0 radio broadcast mixer

Physical Specification

Dimensions (Raw):
48.3cm (W) x 35.6cm (D) x 12.5cm (H)

19" (W) x 14" (D) x 4.9" (H)

Dimensions (Boxed):
67cm (W) x 44cm (D) x 25cm (H)

26.4" (W) x 17.3" (D) x 9.84" (H)

Cut-Out Dimensions:
44cm (W) x 34.7cm (D)

17.32" (W) x 13.66" (D)

Weight:
Nett: 8.5kg Gross: 10.12kg

Nett: 18.7lb Gross: 22.26lb
Ship Separately

0
Product can be split into multiple boxes

0
Sale
Digigram IQOYA X/LINK-DUAL dual stereo audio IP codec

Digigram IQOYA X/LINK-DUAL

In stock

Original price was: $ 4,285.05.Current price is: $ 4,080.44.
Select options
Weight 5 kg
Dimensions 50 × 20 × 12 cm
Sale

Elenos ETG 500.5

In stock

$ 6,208.35
Select options
Weight 9.4 kg
Dimensions 59 × 49 × 9 cm
Product can be split into multiple boxes

0
video

0
Ship Separately

0
specification

GENERAL DATA

Output Nominal Power
500W adjustable

Operating band
87.5 ÷ 108 MHz

RS232/RS485
Yes. Connector DB9 female

Points of measure
RF Sample – MPX Monitor

Displayed Parameters
More than 50 parameters displayed on a wide graphic LCD

Adjustments
From the frontal panel trough OLED/from PC

Number of L-DMOS in amplifier stage
1

RF power stage technology
ICEFET & ECOSAVING

Dimensions: Rack units
2 RU

Dimensions: W – H – D
48.5 – 8.5 – 58.5 cm / 19.11 – 3.35 – 23.05 inches

Weight
9.4 Kg / 20.72 lbs

Number of cooling fans
2

AUDIO PERFORMANCE

MPX input level
+15/-10 dBu for 75 KHz standard deviation

MPX level adjustment
Soft adjust 0.1 dB steps from front panel

MPX input impedance
5 KΩ selectable

L/R input level
+15/-10 dBu for 75 KHz standard deviation

L/R level adjustment
Soft adjust 0.1 dBu steps from front panel

L/R Input Impedance
Selectable 10 K – 600 Ω

,

balanced

AES/EBU input resolution
24 bits

AES/EBU input sample rate
32

,

44.1

,

48

,

96 KHz Automatically selected

AES/EBU input level
-20 dBFS – 0 dBFS

AES/EBU input impedance
110 Ω balanced

AES/EBU-Analog input automatic changeover
Yes

PILOT Amplitude adjustment
Soft adjust 0.05% steps from front panel

PILOT Phase adjustment
Soft adjust 0.01 degree steps from front panel

PILOT tone frequency
19 KHz

PILOT tone deviation
Soft adjust +/- 7.5 KHz

PILOT tone frequency stability
+/- 1 Hz

THD+N (Stereo/Mono operation)
< 0.05% with 75 KHz frequency deviation < 0.05% with 100 KHz frequency deviation 30 Hz to 15 KHz

Pre-emphasis
0/25/50/75 microseconds

,

selectable

Pre-emphasis tolerance
+/- 0.1 dB

FM S/N (MPX operation)
82 dB 20 Hz to 23 KHz @ 53 KHz – detector RMS

FM S/N CCIR (Stereo/Mono operation)
> = 72 dB weighted > = 72 dB unweighted 400 Hz

,

75 KHz frequency deviation

,

quasi-peak detector

,

50 us de-emphasis

Asynchronous AM S/N unweighted
> = 55 dB a 400 Hz

,

75 us de-emphasis

Synchronous AM S/N
> = 50 dB a 400 Hz

,

75 us de-emphasis

Amplitude-frequency characteristic (stereo/mono operation)
+/- 0.1 dB (without pre-emphasis) +/- 0.1 dB (with pre-emphasis) 20 Hz to 15 KHz

,

@ 400 Hz

Stereo Crosstalk (typical)
60 dB @ 400 Hz to 10 KHz

Linear crosstalk
>60 db 20 Hz to 15 KHz

Intermodulation distortion
<0.05% Measured with two of tones 1 KHz & 1.3 KHz

,

ratio 1:1 at 100% modulation

Class of emission
F3

Stereo emission
According to ITU-R reccomendation 450 (pilot tone)

CONNECTORS

RF output connector
N

MPX
BNC Female

LEFT & RIGHT
XLR Female

AES/EBU
XLR Female

AUX
BNC Female

Monitor/19 kHz
BNC Female

RF PERFORMANCE

Output impedance
50 Ω

Automatic power RF control
Stabilizes the output power value on the set value

Overall output power RF stability
+/- 0

,

1 dB

VSWR
2:1 at full power. Automatic power reduction beyond 1.7:1. Transmitter is protected fro open and short circuit.

Harmonics
< -75 dBc

Out of band emission (spurious)
< -80 dBc

EXCITER PERFORMANCE

PLL lock time
<10 sec

Frequency deviation
+/- 75 KHz 0.1 dB steps adjustable

Maximum frequency deviation
+/- 150 KHz

Frequency stability
1 ppm

RF Frequency steps
10 KHz

Phase Response
+/- 0.1 degree from linear phase; 20 KHz to 100 KHz

INSTALLATION REQUIREMENTS

Power supply
110

,

230 Two-Singlephase Version 50-60Hz VAC

Power consumption (typical)
690 W

Overall efficiency (typical from -3 dB to Pnom)
> = 70%

Power factor
> 0.95

Current Consumption @ 230 VAC/single phase
3 A

COOLING/NOISE/DATA

Cooling system
Forced air-cooling

Acoustic noise
< 65 phone @ transmitter room

,

2 M distance from the front of the transmitter

ENVIRONMENT

Temperature range (operating)
-5 ÷ +45 °C

,

23 ÷ 113 °F

Temperature range (non operating)
-20 ÷ +55 °C

,

-4 ÷ 131 °F

Humidity range (operating)
95% @ 40 °C

,

104 °F

Humidity range (non operating)
90% @ 55 °C

,

131 °F

Altitude range (operating)
<3000 meters / <9840 Feet

Altitude range (non operating)
<15000 meters / < 49200 Feet

TELECONTROL & TELEMETRY

Remote control
Yes

Remote control

,

dry contacts
Yes

SNMP option
Yes (external)
features

Features:

High efficiency Extremely low-power consumption and reduced operating costs.
Smart functions/synaptic functions Extraordinary performance level through the use of powerful operational algorithms and inter-module communications within the transmitter. These software algorithms adapt the transmitter to environmental conditions or to any connected device

,

preventing poor RF operation or diminished audio quality.
Very compact size and condensed power Two rack units in height

,

with a weight of less than 14 kilograms (30.8 lbs)

,

unmatched power versus volume and power versus weight ratio.
Planar technology Exceptional stability

,

repeatability

,

reliability and ease of maintenance through the use of planar technology within the entire RF section (RF modules

,

combiners

,

splitter and low-pass filter). This allows for the minimization of internal connections and soldering

,

which increases the long term operation and performance.
Connected everywhere The remote control and management features allow users to receive data and send instructions to the transmitter via several state-of-the-art communication channels — SMS

,

GPRS

,

TCP/IP and SNMP.
Color

Black
-5%
The Glensound Talent Box Mk11 V1 stands out as one of the most advanced and feature-rich single-user commentary solutions on the market.

Glensound Talent Box AES Mk11

In stock

Original price was: $ 4,384.43.Current price is: $ 4,173.97.
Add to Cart
Weight 4.8 kg
Dimensions 31 × 11 × 27 cm
Sale
ECRESO FM 300W AiO Series Digital FM transmitter

ECRESO FM 300W AiO Series

In stock

Original price was: $ 4,530.57.Current price is: $ 4,314.28.
Select options
-5%
AEQ Olympia 3 | Broadcast Commentary Unit with AoIP Support

AEQ Olympia 3

In stock

Original price was: $ 4,437.04.Current price is: $ 4,203.20.
Add to Cart
Sale

WaveArt WAVE 150

In stock

Original price was: $ 4,665.03.Current price is: $ 4,203.20.
Select options
Weight 30 kg
Dimensions 70 × 50 × 20 cm
-5%
The Inovonics JUSTIN 808 maintains time alignment between analog FM and HD1 channels to within 23 microseconds (±1 sample).

Inovonics JUSTIN 808

In stock

Original price was: $ 4,442.89.Current price is: $ 4,232.43.
Add to Cart
Weight 3.8 kg
Dimensions 64 × 44 × 8 cm
features

Precise time alignment between analog FM and HD1
Automatic phase correction and RMS gain leveling
Insert in either the FM or HD Radio AES digital feed
Full Web interface for remote control

,

metering

,

etc.
SMS/email alarms for loss of signal and loss of audio
Extensive data logging with graphic display
Auto failover with relay bypass
Color

Black
specification

CONNECTIVITY

Receiver Input
75-ohm ‘F’ connector. Receiver tunes 87.5 to 107.9MHz in 200kHz steps. An RF input level of 50μV or more assures reliable operation.

AES Digital Audio I/O:AES3 (XLR) digital audio loop-through; 44.1kHz sampling rate

Network Interface: LAN (RJ45) connection to local network and through user’s router to Internet for full Web Interface remote control and monitoring.

PLACEMENT IN AIRCHAIN

In HD Radio AES Audio Feed:
Placed in line with the AES audio feed to the HD Radio exciter

,

the JUSTIN 808 will automatically correct diversity delay errors and r.m.s. level errors between the FM and HD1 programs

In Analog FM AES Audio Feed:
Placed in line with the AES audio feed to the analog FM stereo encoder

,

the JUSTIN 808 is capable of providing the entire diversity delay

,

if required. It will automatically correct diversity delay errors

,

but cannot normalize r.m.s. level errors between the two programs.

DELAY CORRECTION

Correction Resolution:
Corrects to ±1 sample (±23 μs)

Maximum Delay Error Correction:
16 seconds

Time Required to Correlate Delay Errors:
Small delay errors (up to 0.4 seconds) require up to 30 seconds to correlate; delay errors of 10 seconds could require as much as 3.5 minutes.

Time Required to Correct Delay Errors:
Correction rate is user-programmable between 1 and 1000 samples per second (23μs/sec to 23ms/sec).

“Catch-Up” Button Feature:
A front-panel menu item

,

also accessible via the Web Interface

,

permits a manual time alignment quick reset to a previous long-term mean value. This obviates correlation acquisition and brings time alignment close to the required figure.

AUDIO LEVEL & PHASE CORRECTION

The JUSTIN 808 offers automatic program phase correction when a phase reversal is sensed between the analog FM and digital HD1 program channels. R.M.S. level correction is also available when the JUSTIN 808 is placed in the AES digital audio feed to the HD Radio exciter.

ALARMS AND LOGGING

Alarm Conditions
1. RSSI (Low RF signal)

2. Audio Loss or Levels Out of Range

a. AES Loop-Through

b. Off-air FM Audio

c. Off-air HD1 Audio

3. Out of Alignment Range (user preset)

Alarm Indications:
1. Front-panel OLED display

2. Rear-panel ground-closure ‘tallies’ with selectable logic polarity

3. SMS-text/email notifications via SMTP

4. JUSTIN 808 Webpage indication

Alarm Logging:
All alarms are logged by the JUSTIN 808; statistics are presented graphically via the Web Interface and may be downloaded for follow-up study.

WEB INTERFACE

The JUSTIN 808 Web Interface is compatible with desktop/laptop computers

,

tablets and smart phones

,

and supports SNMP with a downloadable MIB file. All functions available at the front panel are duplicated by the Web Interface.

MISCELLANEOUS

Power Requirements:
105 – 130VAC or 210 – 260VAC

,

50/60Hz; 20 watts

Size and Weight:
1¾”H x 19”W x 9”D (1U); 10 lbs. (shipping weight)

Environmental:
0°C – 50°C operating temperature range; 95% noncondensing relative humidity; up to 3000 meters AMSL
Ship Separately

0
video

0
Product can be split into multiple boxes

0