The Sonifex RB-SL2 is a stereo, or twin independent mono, VCA limiter for use in news-rooms and other locations where the correct level into recording equipment.
Additionally, it serves as a budget-friendly main output limiter for small-scale radio stations, hospital radio, and student radio. Featuring XLR-3 electronically balanced inputs and outputs, the RB-SL2 supports unbalanced wiring to accommodate domestic equipment outputs.
Each channel is equipped with input gain and threshold level controls, offering precise audio adjustments. By maximizing the limit threshold, you can normalize the input-output relationship using the input potentiometers. The unit acts as a buffer with gain/attenuation, allowing you to tailor the limit threshold level and recovery to your specific application.
A flashing power LED indicates the limiter’s activation. The rear panel mode switch effortlessly transitions the RB-SL2 between dual mono and stereo operation. When channel 1 (left) presets are active, they apply to both channels, providing stereo limiting for simultaneous control of left and right outputs.
Alternatively, in dual mono mode, left and right signals are independently limited, allowing the RB-SL2 to function as two separate mono limiters. Experience the exceptional performance of the Sonifex RB-SL2, delivering efficient audio level management for your professional and broadcasting needs.
RB-SL2 Block Diagram.
Technical Specification For RB-SL2 |
|
Audio Specification |
|
| Maximum Input Level: | +28dBu |
| Maximum Output Level: | +28dBu |
| Input Gain: | Adjustable -8dB to +18dB gain |
| Limit Threshold: | Adjustable -8dBu to +28dBu |
| Frequency Response: | 20Hz to 20kHz ±0.1dB (600 Ω load, ref 1kHz) |
| Noise: | -100dB unity gain, ref +8dBu output |
| Distortion: | 0.01% THD @ 1kHz, ref +8dBu output, threshold set at +10dBu |
| Common Mode Rejection: | >66dB typically |
| Input Impedance: | >20kΩ balanced bridging |
| Output Impedance: | <50 Ω balanced |
Connections |
|
| Inputs: | 2 x XLR 3 pin female (Balanced, can be unbalanced) |
| Outputs: | 2 x XLR 3 pin male (Balanced, can be unbalanced) |
| Mains Input: | Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max |
| Fuse Rating: | Anti-surge fuse 100mA 20 × 5 mm (230VAC) Anti-surge fuse 250mA 20 × 5 mm (115VAC) |
Equipment Type |
|
| RB-SL2: | Twin mono, or stereo, limiter |
Physical Specification |
|
| Dimensions (Raw): | 28 cm (W) x 10.8 cm (D) x 4.2 cm (H) (1U) 11” (W) x 4.3” (D) x 1.7” (H) (1U) |
| Dimensions (Boxed): | 36 cm (W) x 20.5 cm (D) x 6 cm (H 14.2” (W) x 8” (D) x 2.4” (H) |
| Weight: | Nett: 1.0 kg Gross: 1.45 kg Nett: 2.2lbs Gross: 3.2lbs |
