DEVA DB4402-V2 Dual FM Monitoring Receiver
DEVA DB4402-V2 Original price was: $ 2,507.43.Current price is: $ 2,484.58.
Back to products
Eddystone S7605C
Eddystone S7605C Original price was: $ 36,880.28.Current price is: $ 35,121.09.
-5%
Awaiting product image
Click to enlarge

    Sonifex RB-DS2R

    Original price was: $ 416.95.Current price is: $ 394.11.

    SKU: 103172 Brand: Sonifex

    Related Products

    The Sonifex RB-DS2 is a stereo audio delay synchroniser used for resynchronising audio to video following delay processes such as standards conversion, transmission.

    Sonifex RB-DS2

    In stock

    Original price was: $ 2,130.45.Current price is: $ 2,027.64.
    Select options
    Weight 2.3 kg
    specification

    Technical Specification For RB-DS2

    A/D Specification

    Maximum Input Level:
    +28dBu

    Input Impedance:
    > 10kΩ bridging

    Analogue & Digital Input Levels:
    Selectable +12dBu

    ,

    +18dBu

    ,

    +24dBu for FSD

    Analogue Pre-set Input Gain Range:
    Adjustable 3dB loss to 3dB gain (L & R adjust)

    Signal to Noise:
    Better than -101dBFS (RMS A-weighted at 24bit)

    Dynamic Range:
    > 110dB

    Distortion & Noise:
    > 96dB THD + N at 1kHz

    D/A Specification

    Maximum Output Level:
    +24dBu

    Output Impedance:
    < 50Ω

    Dynamic Range:
    > 100dB

    Analogue Output Gain Range:
    Selectable -6dBu to +24dBu output level

    ,

    ref FSD

    Sampling Frequency:
    Selectable 32kHz

    ,

    44.1kHz

    ,

    48kHz 64kHz

    ,

    88.2kHz or 96kHz

    Sample Width:
    Selectable 16bit or 24bit

    Channels:
    Stereo or dual mono

    Format (Fields & Frames):
    PAL

    ,

    NTSC

    Delay Units:
    Samples

    ,

    fields

    ,

    frames

    ,

    milliseconds

    ,

    hh:mm:ss

    ,

    (with CF expansion)

    Maximum Delay:
    10.5 seconds @ 96kHz

    ,

    24bit

    ,

    stereo (excluding memory expansion)

    Rear Panel Connections

    Analogue Inputs:
    2 x XLR 3 pin female (balanced) (L & R)

    Analogue Outputs:
    2 x XLR 3 pin male (balanced) (L & R)

    Digital Inputs:
    1 x AES/EBU XLR 3 pin female

    Digital Outputs:
    1 x AES/EBU XLR 3 pin male

    Remote I/O Port:
    15-way ‘D’-type plug

    ,

    8 GPI inputs

    ,

    4 GPI outputs

    Serial Comms Port:
    9-way ‘D’-type plug

    Memory Expansion:
    Internal Compact Flash™ storage card supporting up to 2GB. CF cards must be PIO Type 4 or higher.

    Mains Input:
    Filtered IEC

    ,

    continuously rated 85-264 VAC

    ,

    47-63Hz

    ,

    fused

    ,

    60W peak

    ,

    30W average

    Fuse Rating:
    Anti-surge fuse 2A 20 x 5mm

    Front Panel Controls

    Display:
    Vacuum fluorescent display

    System Navigation:
    Rotary selector with integral push-switch

    Audio Bypass:
    Via push-button

    Equipment Type

    RB-DS2:
    Stereo delay synchroniser & time-zone delay

    Physical Specification

    Dimensions (Raw):
    48cm (W) x 15.8cm (D *) x 4.2cm (H) (1U)

    19” (W) x 6.2” (D*) x 1.7” (H) (1U)

    Dimensions (Boxed):
    59cm (W) x 27.5cm (D*) x 11cm (H)

    23.2” (W) x 10.8” (D*) x 4.3” (H)

    Weight
    Nett: 1.6kg Gross: 2.3kg

    Nett: 3.5lbs Gross: 4.8lbs
    Ship Separately

    0
    Product can be split into multiple boxes

    0
    -8%

    Beyerdynamic DT-100

    In stock

    Original price was: $ 217.04.Current price is: $ 199.91.
    Add to Cart
    Weight 0.35 kg
    Product can be split into multiple boxes

    0
    Ship Separately

    0
    specification

    Technical Data

    Transmission type
    Wired

    Headphone design (operating principle)
    Closed

    Headphone impedance
    400 ohms

    Headphone frequency response
    30 – 20.000 Hz

    Nominal sound pressure level
    94 dB

    Construction
    Circumaural (around the ear)

    Cable & plug
    Straight connecting cable with mini-jack plug (3.5 mm) & ¼“ adapter (6.35 mm)

    Net weight without packaging
    350 g
    features

    Closed headphone 
    Legendary

    ,

    classic design 
    Excellent ambient noise attenuation 
    Capable of handling very high SPL 
    Rugged

    ,

    easy serviceable construction as all parts are replaceable 
    Single-sided

    ,

    detachable cable 
    Circumaural ear pads 
    Excellent comfort for long-term wearing 
    Single-Ear version: DT 102
    -6%
    The Sonifex RB-DA6 is a 1U rack-mount high performance 6-way stereo distribution amplifier for splitting a source into a number of different outputs.

    Sonifex RB-DA6

    In stock

    Original price was: $ 685.40.Current price is: $ 645.42.
    Add to Cart
    Weight 1.9 kg
    Dimensions 58.5 × 22.5 × 7 cm
    Product can be split into multiple boxes

    0
    Ship Separately

    0
    specification

    Technical Specification For RB-DA6

    Audio Specification

    Maximum Input Level:
    +28dBu

    Maximum Output Level:
    +28dBu

    Frequency Response:
    20Hz to 20kHz ±0.1dB (600Ω load

    ,

    ref 1kHz)

    Gain Range:
    Adjustable 8dB loss to 18dB gain (L & R adjust)

    Common Mode Rejection:
    >66dB typically

    Input impedance:
    >20kΩ bridging

    Output impedance:
    <50Ω

    Distortion:
    0.01% THD @ 1kHz

    ,

    ref +8dBu output

    Noise:
    -100dB unity gain

    ,

    ref +8dBu output

     
     

    Connections

    Inputs:
    2 x XLR 3 pin female (balanced

    ,

    can be unbalanced)

    Outputs:
    12 x XLR 3 pin male (balanced

    ,

    can be unbalanced)

    Mains Input:
    Filtered IEC

    ,

    switchable 110-120V

    ,

    or 220-240V

    ,

    fused

    ,

    6W max

    Fuse Rating:
    Anti-surge fuse 100mA 20 x 5mm (230VAC)
    Anti-surge fuse 250mA 20 x 5mm (115VAC)

     
     

    Equipment Type

    RB-DA6:
    6 way stereo distribution amplifier

     
     

    Physical Specification

    Dimensions (Raw):
    48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
    19” (W) x 4.3” (D) x 1.7” (H) (1U)

    Dimensions (Boxed):
    58.5cm (W) x 22.5cm (D) x 7cm (H)
    23” (W) x 8.9” (D) x 2.8” (H)

    Weight:
    Nett: 1.3kg  Gross: 1.9kg
    Nett: 2.9lbs Gross: 4.2lbs
    -5%
    The Glensound Signature SD1+ is a silence detector used to switch audio to a backup source when the primary audio source falls below accepted silence thresholds.

    Glensound Signature SD1+

    In stock

    Original price was: $ 873.89.Current price is: $ 828.19.
    Add to Cart
    Weight 2.1 kg
    Dimensions 45 × 17 × 5 cm
    -5%
    The Sonifex RB-PD2 is a stereo audio profanity delay used for live broadcast programs to prevent unwanted or obscene material from being broadcast.

    Sonifex RB-PD2

    In stock

    Original price was: $ 4,049.58.Current price is: $ 3,855.38.
    Add to Cart
    Weight 2.3 kg
    Dimensions 59 × 278 × 11 cm
    Product can be split into multiple boxes

    0
    Ship Separately

    0
    specification

    Technical Specification For RB-PD2

    A/D Specification

    Maximum Input Level:
    +28dBu

    Input Impedance:
    > 10kΩ bridging

    Analogue & Digital Input Levels:
    Selectable +12dBu

    ,

    +18dBu

    ,

    +24dBu for FSD

    Analogue Pre-set Input Gain Range:
    Adjustable 3dB loss to 3dB gain (L & R adjust)

    Signal to Noise:
    Better than -101dBFS (RMS A-weighted at 24bit)

    Dynamic Range:
    > 110dB

    Distortion & Noise:
    > 96dB THD + N at 1kHz

    D/A Specification

    Maximum Output Level:
    +24dBu

    Output Impedance:
    < 50Ω

    Dynamic Range:
    > 100dB

    Analogue Output Gain Range:
    Selectable -6dBu to +24dBu output level

    ,

    ref FSD

    Sampling Frequency:
    Selectable 32kHz

    ,

    44.1kHz or 48kHz

    Sample Width:
    Selectable 16bit or 24bit

    Channels:
    Stereo

    Minimum Delay:
    2 seconds

    Maximum Delay:
    Dependent on sample and bit rates selected:

    32kHz:
    16 bit – 55 seconds

    24 bit – 27.5 seconds

    44.1kHz:
    16 bit – 40 seconds

    24 bit – 20 seconds

    48kHz:
    16 bit – 37 seconds

    24 bit – 18.5 seconds

    Rear Panel Connections

    Analogue Inputs:
    2 x XLR 3 pin female (balanced) (L & R)

    Analogue Outputs:
    2 x XLR 3 pin male (balanced) (L & R)

    Digital Inputs:
    1 x AES/EBU XLR 3 pin female

    Digital Outputs:
    1 x AES/EBU XLR 3 pin male

    Remote I/O Port:
    15-way ‘D’-type plug

    ,

    8 GPI inputs

    ,

    6 GPI outputs

    Serial Comms Port:
    9-way ‘D’-type plug

    Mains Input:
    Filtered IEC

    ,

    continuously rated 85 – 264VAC

    ,

    47 – 63Hz

    ,

    fused

    ,

    60W peak

    ,

    30W average

    Fuse Rating:
    Anti-surge fuse 2A 20 x 5mm

    Front Panel Controls

    Display:
    Vacuum fluorescent display

    Direct Control Push-Buttons:
    Build Delay

    ,

    Exit Delay

    ,

    Cough

    ,

    Audio Bypass & Dump/Drop

    System Navigation:
    Rotary selector with integral push-switch

    Removable Audio Storage Device:
    Compact Flash™ memory card port (supporting up to 2GB)CF™ card used must be PIO type 4 or higher

    Equipment Type

    RB-PD2:
    Stereo profanity delay

    Physical Specification

    Dimensions (Raw):
    48cm (W) x 15.8cm (D*) x 4.3cm (H) (1U)

    19” (W) x 6.2” (D*) x 1.7” (H) (1U)

    Dimensions (Boxed):
    59cm (W) x 27.5cm (D) x 11cm (H)

    23.2” (W) x 10.8” (D) x 4.3” (H)

    Weight :
    Nett: 1.7kg Gross: 2.3kg

    Nett: 3.7lbs Gross: 5lbs
    -5%
    The Sonifex RB-DSD8 8 channel silence switcher works similarly to the Sonifex RB-SD1 and RB-DSD1 but allows for 4 stereo channels of audio.

    Sonifex RB-DSD8

    In stock

    Original price was: $ 4,432.26.Current price is: $ 4,215.22.
    Add to Cart