Sonifex RB-DS2
The Sonifex RB-DS2 is a stereo audio delay synchroniser used for resynchronising audio to video following delay processes such as standards conversion, transmission.
Original price was: €1,865.00.€1,775.00Current price is: €1,775.00.
Description
The Sonifex RB-DS2 is a high-quality stereo audio delay synchroniser, designed to resynchronise audio to video after various delay-inducing processes such as standards conversion, transmission delay, logo insertion, video aspect ratio conversion, and network delays. It supports digital audio signals up to 96kHz, 24 bit, ensuring superb sonic quality and smooth, silent switching for clean audio delay.
Key Features:
- Inputs & Outputs:
- Balanced analogue and AES/EBU digital audio on 3-pin XLR connectors.
- Can function as an A/D and D/A unit, allowing analogue inputs to be delayed and output as AES/EBU or vice-versa.
- Can be used in stereo, dual mono, or mono modes.
- Delay Capabilities:
- Standard delay: Up to 10.5 seconds at 96kHz, 24 bit (42 seconds at 48kHz, 16 bit).
- Expanded delay: With Compact Flash™ expansion (up to 2GB), delay times exceed 4 hours.
- Delay time units: Samples, fields, frames, meters, milliseconds, and hh:mm
(with CF expansion).
- User Interface:
- Blue vacuum fluorescent display with rotary controller.
- Settings include source selection (analogue/digital), channels, sample rate, bit width, format (PAL/NTSC), delay units, and delay time.
- Input peak levels: Selectable from +12dBu, +18dBu, and +24dBu for FSD.
- Rear panel pre-set potentiometers adjust input gain by ±3dB around the selected peak digits.
- Output Control:
- Analogue output gain: Adjustable in software from -6dBu to +24dBu output level, ref FSD.
- Separate muting for both analogue and digital outputs.
- Bypass function: Diverts both analogue and digital inputs to their outputs via electro-mechanical relays, also engaged automatically during power-fail.
- Remote and Security Features:
- Eight configurable settings can be saved and loaded, remotely controlled using GPI contacts.
- RS232 serial port for remote control.
- Front panel controls can be locked-out for remote operations or physical security.
Specifications:
- A/D Conversion:
- Maximum Input Level: +28dBu
- Input Impedance: > 10kΩ bridging
- Signal to Noise: Better than -101dBFS (RMS A-weighted at 24bit)
- Dynamic Range: > 110dB
- Distortion & Noise: > 96dB THD + N at 1kHz
- D/A Conversion:
- Maximum Output Level: +24dBu
- Output Impedance: < 50Ω
- Dynamic Range: > 100dB
- Sampling Frequency: Selectable 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz, or 96kHz
- Sample Width: Selectable 16bit or 24bit
- Physical and Electrical:
- Dimensions: 48cm (W) x 15.8cm (D) x 4.2cm (H) (1U)
- Weight: Nett 1.6kg, Gross 2.3kg
- Mains Input: Filtered IEC, 85-264 VAC, 47-63Hz, 60W peak, 30W average
- Fuse Rating: Anti-surge fuse 2A 20 x 5mm
- Connections:
- Analogue Inputs: 2 x XLR 3 pin female
- Analogue Outputs: 2 x XLR 3 pin male
- Digital Inputs: 1 x AES/EBU XLR 3 pin female
- Digital Outputs: 1 x AES/EBU XLR 3 pin male
- Remote I/O Port: 15-way ‘D’-type plug
- Serial Comms Port: 9-way ‘D’-type plug
- Memory Expansion: Internal Compact Flash™ storage card up to 2GB
This device is ideal for permanent installations needing consistent audio delay correction or for intermittent use, such as live link adjustments. Its versatility, high audio quality, and robust feature set make it suitable for a wide range of professional audio-visual applications.
Related Products
Sonifex RB-DA6
In stock
| Weight | 1.9 kg |
|---|---|
| Dimensions | 58.5 × 22.5 × 7 cm |
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Technical Specification For RB-DA6 Audio Specification Maximum Input Level: Maximum Output Level: Frequency Response: ref 1kHz) Gain Range: Common Mode Rejection: Input impedance: Output impedance: Distortion: ref +8dBu output Noise: ref +8dBu output Connections Inputs: can be unbalanced) Outputs: can be unbalanced) Mains Input: switchable 110-120V ,or 220-240V ,fused ,6W max Fuse Rating: Equipment Type RB-DA6: Physical Specification Dimensions (Raw): Dimensions (Boxed): Weight: |
DEVA Broadcast DB8008
In stock
| Weight | 2.9 kg |
|---|---|
| Dimensions | 54 × 30 × 11.5 cm |
| specification |
Main Analog Audio InputsConnectorsBalanced XLRImpedance600Ω or high impedanceLevel2 ranges: 0 dBu or +12 dBu Jumper selectable ,with software adjustmentsDynamic range>80dBDigital Gain Adjust-10db to +10dBMain Digital Audio InputsConnectorsBalanced XLR ,Coaxial ,OpticalSample Rates32 ,44.1 ,48 ,96 kHzDigital Gain Adjust-10db to +10dBAux Analog Audio InputsConnectorsBalanced XLRImpedance600Ω or high impedanceLevel2 ranges: 0 dBu or +12 dBu Jumper selectable ,with software adjustmentsDynamic range>80dBDigital Gain Adjust-10db to +10dBAux Digital Audio InputsConnectorsBalanced XLR ,Coaxial ,OpticalSample Rates32 ,44.1 ,48 ,96 kHzDigital Gain Adjust-10db to +10dBIP Audio SourceNumber of Streamsone main and two alternative streams with auto-switch on failureStream Clientsshoutcast ,icecastStream FormatsPCM (32 ,44.1 ,48kHz) ,MPEG1 Layer 3 (MP3) ,HE-AAC (v.1 and v.2)Bit RatesAll standard bit rates ,including VBRNumber of ChannelsMono ,StereoBuffer Size Adjust5Kb to 64KbDigital Gain Adjust-10db to +10dBBuilt-In MP3 PlayerStorage Capacity2Gb on SD CardSupported encodersHE-AAC (v.1 and v.2) ,MPEG-1 Layer 3MP3 bit rates32-320 kbps and VBRSample ratesAll sampling frequencies specified by MPEG1 L1/L2/L3 (32 ,44.1 and 48kHz);MPEG2 L1/L2/L3 (16kHz ,22.05kHz and 24kHz) and MPEG2.5 L3 (8kHz ,11.025kHz ,and 12kHz)Supported file types*.MP3 ,*.AAC ,*.M4A ,*.M3UPlayback modesAlphabetical ascending and descending ,Shuffle ,Playlist and Shuffled playlistRemote file managementBuild-in FTP serverDigital Gain Adjust-10db to +10dBAnalog Audio OutputConnectorBalanced XLRFrequency response±0.5dB ,5Hz-20kHzDistortion80dBDigital Gain Adjust-10db to +10dBDigital Audio OutputsConnectorsBalanced XLR ,Coaxial ,OpticalSample rates32 ,44.1 ,48kHzDigital Gain Adjust-10db to +10dBPhones Audio OutputConnector1/4" (6.3mm) jack ,stereoTypeHeadphonesSilence DetectorThresholdAdjustable from -40dBfs to -5dBfsTrigger time10-250 secUser InterfaceIndicators5 LEDs on front panel ,2 LEDs on rear panelWeb interfacecontrol ,configuration and status informationSNMP interfacecontrol ,configuration and status informationFront PanelLCD with KeyboardNetworkConnectorRJ-45TypeEthernetDevice DiscoveryUPnP supportOperating conditionsTemperature10°C – 45°CHumidity< 75% ,non-condensingPower RequirementsVoltage115/230V AC (internal switch) ,18VAConnectorIEC320 ,rear panelSize and WeightDimension (W x H x D)1U ,19" x 1.7" x 6.9" ,483 x 45 x 160 mmWeight8 lbs ,3kg |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
Inovonics JUSTIN 808
In stock
| Weight | 3.8 kg |
|---|---|
| Dimensions | 64 × 44 × 8 cm |
| features |
Precise time alignment between analog FM and HD1 metering ,etc. |
| Color |
Black |
| specification |
CONNECTIVITY Receiver Input AES Digital Audio I/O:AES3 (XLR) digital audio loop-through; 44.1kHz sampling rate Network Interface: LAN (RJ45) connection to local network and through user’s router to Internet for full Web Interface remote control and monitoring. PLACEMENT IN AIRCHAIN In HD Radio AES Audio Feed: the JUSTIN 808 will automatically correct diversity delay errors and r.m.s. level errors between the FM and HD1 programs In Analog FM AES Audio Feed: the JUSTIN 808 is capable of providing the entire diversity delay ,if required. It will automatically correct diversity delay errors ,but cannot normalize r.m.s. level errors between the two programs. DELAY CORRECTION Correction Resolution: Maximum Delay Error Correction: Time Required to Correlate Delay Errors: Time Required to Correct Delay Errors: “Catch-Up” Button Feature: also accessible via the Web Interface ,permits a manual time alignment quick reset to a previous long-term mean value. This obviates correlation acquisition and brings time alignment close to the required figure. AUDIO LEVEL & PHASE CORRECTION The JUSTIN 808 offers automatic program phase correction when a phase reversal is sensed between the analog FM and digital HD1 program channels. R.M.S. level correction is also available when the JUSTIN 808 is placed in the AES digital audio feed to the HD Radio exciter. ALARMS AND LOGGING Alarm Conditions 2. Audio Loss or Levels Out of Range a. AES Loop-Through b. Off-air FM Audio c. Off-air HD1 Audio 3. Out of Alignment Range (user preset) Alarm Indications: 2. Rear-panel ground-closure ‘tallies’ with selectable logic polarity 3. SMS-text/email notifications via SMTP 4. JUSTIN 808 Webpage indication Alarm Logging: WEB INTERFACE The JUSTIN 808 Web Interface is compatible with desktop/laptop computers ,tablets and smart phones ,and supports SNMP with a downloadable MIB file. All functions available at the front panel are duplicated by the Web Interface. MISCELLANEOUS Power Requirements: 50/60Hz; 20 watts Size and Weight: Environmental: |
| Ship Separately |
0 |
| video |
0 |
| Product can be split into multiple boxes |
0 |
Reviews
There are no reviews yet