Delta Meccanica 20011/3 is a 2kW triple-cavity FM bandpass filter for 87.5–108MHz, with low insertion loss, 50-ohm impedance and DIN 7/16 or EIA 7/8-inch connections.
$ 2,557.00
Delta Meccanica 20011/3 – 2 kW Triple-Cavity FM Bandpass Filter provides frequency-selective filtering for FM Band II transmission systems. Rated for a maximum input power of 2,000 W, it supports operating frequencies within 87.5–108 MHz. Its three-cavity design combines low passband loss with specified selectivity outside the selected centre frequency.
The Delta Meccanica 20011/3 technical sheet specifies selectivity greater than 24 dB at offsets of ±1.2 MHz from the centre frequency. This gives a defined reference point for assessing the filter’s out-of-band response. It does not establish rejection at every other frequency, so request a response plot for the intended operating frequency and interference conditions.
Delta Meccanica 20011/3 has published insertion loss below 0.5 dB at the centre frequency and below 0.6 dB at offsets of ±150 kHz. Input and output impedance are 50 ohms, with return loss greater than 26 dB. These specifications help assess transmission-path loss and matching when integrating the filter with compatible RF equipment.
The verified technical sheet lists DIN 7/16 or EIA 7/8-inch connections. Confirm the required connector configuration, mechanical interface and supplied accessories before ordering. The 87.5–108 MHz specification describes the supported operating-frequency range; it should not be presented as the filter’s simultaneous passband width. Specify the required centre frequency and acceptance measurements with the supplier.
Published dimensions are 764 × 254 × 800 mm, expressed as width × depth × height, with a product weight of 33 kg. The stated temperature range is −10 to +50 °C. Obtain the current installation drawing and confirm mechanical support, RF cable clearance and power-rating conditions for the supplied unit.