Sync, Delays and Silence - Broadcasters Warehouse

All Categories

$ -

Showing all 10 resultsSorted by price: low to high

Show 10 15 20 25

The Sonifex RB-DS2 is a stereo audio delay synchroniser used for resynchronising audio to video following delay processes such as standards conversion, transmission.

Sonifex RB-DS2

In stock

Weight	2.3 kg
specification	Technical Specification For RB-DS2 A/D Specification Maximum Input Level: +28dBu Input Impedance: > 10kΩ bridging Analogue & Digital Input Levels: Selectable +12dBu , +18dBu , +24dBu for FSD Analogue Pre-set Input Gain Range: Adjustable 3dB loss to 3dB gain (L & R adjust) Signal to Noise: Better than -101dBFS (RMS A-weighted at 24bit) Dynamic Range: > 110dB Distortion & Noise: > 96dB THD + N at 1kHz D/A Specification Maximum Output Level: +24dBu Output Impedance: < 50Ω Dynamic Range: > 100dB Analogue Output Gain Range: Selectable -6dBu to +24dBu output level , ref FSD Sampling Frequency: Selectable 32kHz , 44.1kHz , 48kHz 64kHz , 88.2kHz or 96kHz Sample Width: Selectable 16bit or 24bit Channels: Stereo or dual mono Format (Fields & Frames): PAL , NTSC Delay Units: Samples , fields , frames , milliseconds , hh:mm:ss , (with CF expansion) Maximum Delay: 10.5 seconds @ 96kHz , 24bit , stereo (excluding memory expansion) Rear Panel Connections Analogue Inputs: 2 x XLR 3 pin female (balanced) (L & R) Analogue Outputs: 2 x XLR 3 pin male (balanced) (L & R) Digital Inputs: 1 x AES/EBU XLR 3 pin female Digital Outputs: 1 x AES/EBU XLR 3 pin male Remote I/O Port: 15-way ‘D’-type plug , 8 GPI inputs , 4 GPI outputs Serial Comms Port: 9-way ‘D’-type plug Memory Expansion: Internal Compact Flash™ storage card supporting up to 2GB. CF cards must be PIO Type 4 or higher. Mains Input: Filtered IEC , continuously rated 85-264 VAC , 47-63Hz , fused , 60W peak , 30W average Fuse Rating: Anti-surge fuse 2A 20 x 5mm Front Panel Controls Display: Vacuum fluorescent display System Navigation: Rotary selector with integral push-switch Audio Bypass: Via push-button Equipment Type RB-DS2: Stereo delay synchroniser & time-zone delay Physical Specification Dimensions (Raw): 48cm (W) x 15.8cm (D ) x 4.2cm (H) (1U) 19” (W) x 6.2” (D) x 1.7” (H) (1U) Dimensions (Boxed): 59cm (W) x 27.5cm (D) x 11cm (H) 23.2” (W) x 10.8” (D) x 4.3” (H) Weight Nett: 1.6kg Gross: 2.3kg Nett: 3.5lbs Gross: 4.8lbs
Ship Separately	0
Product can be split into multiple boxes	0

The 2WCOM D110Lite is an affordable clock and time distribution device to distribute externally fed 1PPS and reference (REF, i.e. 10MHz) inputs.

2WCOM D110Lite

In stock

Call for price

The Sonifex RB-FS82 8 + 2 audio failover switcher is an important tool in many critical areas in telecommunications and broadcast chains.

Sonifex RB-FS82

In stock

The DEVA Broadcast DB8000 Silence Monitor & Backup Audio Player is the best device to fight the dreaded dead air problem.

DEVA Broadcast DB8000

In stock

Weight	3.9 kg
Dimensions	54 × 30 × 11.5 cm
Product can be split into multiple boxes	0
Ship Separately	0

The DEVA Broadcast DB8008 is the industry’s go-to solution for uninterrupted audio streaming and broadcast reliability.

DEVA Broadcast DB8008

In stock

Weight	2.9 kg
Dimensions	54 × 30 × 11.5 cm
specification	Main Analog Audio InputsConnectorsBalanced XLRImpedance600Ω or high impedanceLevel2 ranges: 0 dBu or +12 dBu Jumper selectable , with software adjustmentsDynamic range>80dBDigital Gain Adjust-10db to +10dBMain Digital Audio InputsConnectorsBalanced XLR , Coaxial , OpticalSample Rates32 , 44.1 , 48 , 96 kHzDigital Gain Adjust-10db to +10dBAux Analog Audio InputsConnectorsBalanced XLRImpedance600Ω or high impedanceLevel2 ranges: 0 dBu or +12 dBu Jumper selectable , with software adjustmentsDynamic range>80dBDigital Gain Adjust-10db to +10dBAux Digital Audio InputsConnectorsBalanced XLR , Coaxial , OpticalSample Rates32 , 44.1 , 48 , 96 kHzDigital Gain Adjust-10db to +10dBIP Audio SourceNumber of Streamsone main and two alternative streams with auto-switch on failureStream Clientsshoutcast , icecastStream FormatsPCM (32 , 44.1 , 48kHz) , MPEG1 Layer 3 (MP3) , HE-AAC (v.1 and v.2)Bit RatesAll standard bit rates , including VBRNumber of ChannelsMono , StereoBuffer Size Adjust5Kb to 64KbDigital Gain Adjust-10db to +10dBBuilt-In MP3 PlayerStorage Capacity2Gb on SD CardSupported encodersHE-AAC (v.1 and v.2) , MPEG-1 Layer 3MP3 bit rates32-320 kbps and VBRSample ratesAll sampling frequencies specified by MPEG1 L1/L2/L3 (32 , 44.1 and 48kHz);MPEG2 L1/L2/L3 (16kHz , 22.05kHz and 24kHz) and MPEG2.5 L3 (8kHz , 11.025kHz , and 12kHz)Supported file types.MP3 , .AAC , .M4A , .M3UPlayback modesAlphabetical ascending and descending , Shuffle , Playlist and Shuffled playlistRemote file managementBuild-in FTP serverDigital Gain Adjust-10db to +10dBAnalog Audio OutputConnectorBalanced XLRFrequency response±0.5dB , 5Hz-20kHzDistortion80dBDigital Gain Adjust-10db to +10dBDigital Audio OutputsConnectorsBalanced XLR , Coaxial , OpticalSample rates32 , 44.1 , 48kHzDigital Gain Adjust-10db to +10dBPhones Audio OutputConnector1/4" (6.3mm) jack , stereoTypeHeadphonesSilence DetectorThresholdAdjustable from -40dBfs to -5dBfsTrigger time10-250 secUser InterfaceIndicators5 LEDs on front panel , 2 LEDs on rear panelWeb interfacecontrol , configuration and status informationSNMP interfacecontrol , configuration and status informationFront PanelLCD with KeyboardNetworkConnectorRJ-45TypeEthernetDevice DiscoveryUPnP supportOperating conditionsTemperature10°C – 45°CHumidity< 75% , non-condensingPower RequirementsVoltage115/230V AC (internal switch) , 18VAConnectorIEC320 , rear panelSize and WeightDimension (W x H x D)1U , 19" x 1.7" x 6.9" , 483 x 45 x 160 mmWeight8 lbs , 3kg
Ship Separately	0
Product can be split into multiple boxes	0

The Sonifex RB-DD4 4 channel digital audio delay allows you to delay 4 mono channels of audio independently or together.

Sonifex RB-DD4

In stock

Weight	2 kg
Dimensions	59 × 27.5 × 11 cm
Product can be split into multiple boxes	0
Ship Separately	0
specification	Technical Specification For RB-DD4 Audio Specification Dynamic Range: >138dB Distortion and Noise: <-137dB THD + N at 1kHz , ref 0dB FS Input & Output Impedances: 110Ω ±20% AES/EBU balanced I/O 75Ω ±5% S/PDIF unbalanced I/O 75Ω ±5% TOSlink unbalanced I/O 50Ω BNC TTL word clock input Signal Level: Balanced: 3V/10V peak to peak min/max Unbalanced: Min 0.5V±20% peak to peak Sample Frequencies: 32 , 44.1 , 48 , 88.2 , 96 , 176.4 or 192kHz Bit Depth: Up to and including 24 bit Max Delay: 8 secs per mono channel at 32kHz 1.33 secs per mono channel at 192kHz Frame Rates (Front Panel): 23.98fps , 24fps , 25fps , 29.97fps , 30fps , 50fps , 59.94fps , 60fps Frame Rates (SCi Software): 525/29.97 , 625/25 , 720/60p , 720/59.94p , 720/50p , 720/30p , 720/29.97p , 720/25p , 720/24p , 720/23.98p , 1035/60i , 1035/59.94i , 1080/60i , 1080/59.94i , 1080/50i , 1080/30p , 1080/29.97p , 1080/25p , 1080/24p , 1080/23.98p , 1080/30pSF , 1080/29.97pSF , 1080/25pSF , 1080/24pSF , 1080/23.98pSF , 1080/60p , 1080/59.94p , 1080/50p Delay Settable: 1 to 19 frames (front panel controls) Frames , lines , fields , milliseconds and samples up to total delay time (SCi software) Front Panel Operational Controls & Indicators Digital Input Select: AES/EBU , S/PDIF or TOSlink optical via INPUT 1 & 2 or INPUT 3 & 4 push-buttons Delay Control: Delay time selection system via front panel push button Monitor Select Control: Headphone monitor channel select Indicators: Input presence indicators via bicolour LEDS around each push button Rear Panel Operational Controls Master Select: 32 , 44.1 , 48 , 88.2 , 96 , 176.4 or 192kHz Frequency via rear panel DIPswitches Sync Source Select: INPUTS 1&2 , INPUTS 3&4 , AES Sync , Word Clock , Video Sync via rear panel DIPswitches Sync Mode Select: Master , Auto Sync , Auto Lock , Slave via rear panel DIPswitches Stereo Features: Stereo monitor outputs via rear panel DIPswitches Monitor Attenuation: 12dB Monitor attenuation via rear panel DIPswitches Serial Mode: Enter serial control mode via rear panel DIPswitches Boot Mode: Boot up base code or firmware via rear panel DIPswitches Connections Digital Inputs: 2 x AES/EBU XLR 3 pin female 2 x S/PDIF RCA phono 2 x TOSLink optical input Digital Outputs: 2 x AES/EBU XLR 3 pin plug 2 x S/PDIF RCA phono socket 2 x TOSLink optical output Sync Inputs: 1 x AES/EBU XLR 3 pin female 1 x Word Clock BNC 1 x Video Input (optional) Remote I/O Port: 15 way D-type plug Serial Port: RS232 , RJ45 socket Mains Input: Universal filtered IEC , continuously rated 85-264VAC@47- 63Hz , max 10W Fuse Rating: Anti-surge fuse 1A 20 x 5mm Equipment Type RB-DD4: 4 channel digital audio delay Physical Specifications Dimensions (Raw): 48cm (W) x 10.8cm (D) x 4.2cm (H) (1U) 19” (W) x 4.3” (D) x 1.7” (H) (1U) Dimensions (Boxed): 59cm (W) x 27.5cm (D) x 11cm (H) 23.2” (W) x 10.8” (D) x 4.3” (H) Weight: Nett: 1.4kg Gross: 2.0kg Nett: 3.1lb Gross: 4.4lb Accessories RB-SYA: Analogue video sync board (NTSC , PAL & SECAM) RB-SYD: Digital video sync board (SD-SDI & HD-SDI) RB-RK3: 1U Rear panel rack kit for large Redboxes

DEVA Broadcast DB8009-MPX

In stock

Weight	3 kg
Dimensions	30 × 54 × 12 cm

The AEV Delay Pro is a professional-grade broadcast audio profanity delay system, designed to prevent unwanted content during live broadcasts.

AEV Delay Pro

In stock

The Sonifex RB-PD2 is a stereo audio profanity delay used for live broadcast programs to prevent unwanted or obscene material from being broadcast.

Sonifex RB-PD2

In stock

Weight	2.3 kg
Dimensions	59 × 278 × 11 cm
Product can be split into multiple boxes	0
Ship Separately	0
specification	Technical Specification For RB-PD2 A/D Specification Maximum Input Level: +28dBu Input Impedance: > 10kΩ bridging Analogue & Digital Input Levels: Selectable +12dBu , +18dBu , +24dBu for FSD Analogue Pre-set Input Gain Range: Adjustable 3dB loss to 3dB gain (L & R adjust) Signal to Noise: Better than -101dBFS (RMS A-weighted at 24bit) Dynamic Range: > 110dB Distortion & Noise: > 96dB THD + N at 1kHz D/A Specification Maximum Output Level: +24dBu Output Impedance: < 50Ω Dynamic Range: > 100dB Analogue Output Gain Range: Selectable -6dBu to +24dBu output level , ref FSD Sampling Frequency: Selectable 32kHz , 44.1kHz or 48kHz Sample Width: Selectable 16bit or 24bit Channels: Stereo Minimum Delay: 2 seconds Maximum Delay: Dependent on sample and bit rates selected: 32kHz: 16 bit – 55 seconds 24 bit – 27.5 seconds 44.1kHz: 16 bit – 40 seconds 24 bit – 20 seconds 48kHz: 16 bit – 37 seconds 24 bit – 18.5 seconds Rear Panel Connections Analogue Inputs: 2 x XLR 3 pin female (balanced) (L & R) Analogue Outputs: 2 x XLR 3 pin male (balanced) (L & R) Digital Inputs: 1 x AES/EBU XLR 3 pin female Digital Outputs: 1 x AES/EBU XLR 3 pin male Remote I/O Port: 15-way ‘D’-type plug , 8 GPI inputs , 6 GPI outputs Serial Comms Port: 9-way ‘D’-type plug Mains Input: Filtered IEC , continuously rated 85 – 264VAC , 47 – 63Hz , fused , 60W peak , 30W average Fuse Rating: Anti-surge fuse 2A 20 x 5mm Front Panel Controls Display: Vacuum fluorescent display Direct Control Push-Buttons: Build Delay , Exit Delay , Cough , Audio Bypass & Dump/Drop System Navigation: Rotary selector with integral push-switch Removable Audio Storage Device: Compact Flash™ memory card port (supporting up to 2GB)CF™ card used must be PIO type 4 or higher Equipment Type RB-PD2: Stereo profanity delay Physical Specification Dimensions (Raw): 48cm (W) x 15.8cm (D) x 4.3cm (H) (1U) 19” (W) x 6.2” (D) x 1.7” (H) (1U) Dimensions (Boxed): 59cm (W) x 27.5cm (D) x 11cm (H) 23.2” (W) x 10.8” (D) x 4.3” (H) Weight : Nett: 1.7kg Gross: 2.3kg Nett: 3.7lbs Gross: 5lbs

The Inovonics JUSTIN 808 maintains time alignment between analog FM and HD1 channels to within 23 microseconds (±1 sample).

Inovonics JUSTIN 808

In stock

Weight	3.8 kg
Dimensions	64 × 44 × 8 cm
features	Precise time alignment between analog FM and HD1 Automatic phase correction and RMS gain leveling Insert in either the FM or HD Radio AES digital feed Full Web interface for remote control , metering , etc. SMS/email alarms for loss of signal and loss of audio Extensive data logging with graphic display Auto failover with relay bypass
Color	Black
specification	CONNECTIVITY Receiver Input 75-ohm ‘F’ connector. Receiver tunes 87.5 to 107.9MHz in 200kHz steps. An RF input level of 50μV or more assures reliable operation. AES Digital Audio I/O:AES3 (XLR) digital audio loop-through; 44.1kHz sampling rate Network Interface: LAN (RJ45) connection to local network and through user’s router to Internet for full Web Interface remote control and monitoring. PLACEMENT IN AIRCHAIN In HD Radio AES Audio Feed: Placed in line with the AES audio feed to the HD Radio exciter , the JUSTIN 808 will automatically correct diversity delay errors and r.m.s. level errors between the FM and HD1 programs In Analog FM AES Audio Feed: Placed in line with the AES audio feed to the analog FM stereo encoder , the JUSTIN 808 is capable of providing the entire diversity delay , if required. It will automatically correct diversity delay errors , but cannot normalize r.m.s. level errors between the two programs. DELAY CORRECTION Correction Resolution: Corrects to ±1 sample (±23 μs) Maximum Delay Error Correction: 16 seconds Time Required to Correlate Delay Errors: Small delay errors (up to 0.4 seconds) require up to 30 seconds to correlate; delay errors of 10 seconds could require as much as 3.5 minutes. Time Required to Correct Delay Errors: Correction rate is user-programmable between 1 and 1000 samples per second (23μs/sec to 23ms/sec). “Catch-Up” Button Feature: A front-panel menu item , also accessible via the Web Interface , permits a manual time alignment quick reset to a previous long-term mean value. This obviates correlation acquisition and brings time alignment close to the required figure. AUDIO LEVEL & PHASE CORRECTION The JUSTIN 808 offers automatic program phase correction when a phase reversal is sensed between the analog FM and digital HD1 program channels. R.M.S. level correction is also available when the JUSTIN 808 is placed in the AES digital audio feed to the HD Radio exciter. ALARMS AND LOGGING Alarm Conditions 1. RSSI (Low RF signal) 2. Audio Loss or Levels Out of Range a. AES Loop-Through b. Off-air FM Audio c. Off-air HD1 Audio 3. Out of Alignment Range (user preset) Alarm Indications: 1. Front-panel OLED display 2. Rear-panel ground-closure ‘tallies’ with selectable logic polarity 3. SMS-text/email notifications via SMTP 4. JUSTIN 808 Webpage indication Alarm Logging: All alarms are logged by the JUSTIN 808; statistics are presented graphically via the Web Interface and may be downloaded for follow-up study. WEB INTERFACE The JUSTIN 808 Web Interface is compatible with desktop/laptop computers , tablets and smart phones , and supports SNMP with a downloadable MIB file. All functions available at the front panel are duplicated by the Web Interface. MISCELLANEOUS Power Requirements: 105 – 130VAC or 210 – 260VAC , 50/60Hz; 20 watts Size and Weight: 1¾”H x 19”W x 9”D (1U); 10 lbs. (shipping weight) Environmental: 0°C – 50°C operating temperature range; 95% noncondensing relative humidity; up to 3000 meters AMSL
Ship Separately	0
video	0
Product can be split into multiple boxes	0

Start typing to see posts you are looking for.

Set your categories menu in Header builder -> Mobile -> Mobile menu element -> Show/Hide -> Choose menu