Belar Inc. is the world’s leading manufacturer of modulation monitors, used by broadcast stations to monitor important technical aspects of their signal.
Belar AMMA-2
In stock
| Weight | 4.5 kg |
|---|---|
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Specifications: RF Frequency Range RF Tuning Increments RF Sensitivity RF Input Impedance internally connected Accuracy Display Large 16-character alphanumeric LED display for menus and parameters Frequency Response 30 Hz to 10.2 kHz -3dB @ 11.9kHz -100 dB @ 16 kHz Audio Outputs Audio Monitor 600 ohm ,balanced (XLR) ,NRSC or Flat Audio Test Frequency Response 30 Hz to 10.2 kHz Distortion IMD (SMPTE ,CCIF ,DIM) Signal to noise ratio Signal Delay Meter: 90 ms. Automatic Carrier Level Adjustment range Remote Meter Output Remote Alarms Normal ,Negative PPM ,Positive PPM Loss of Carrier ,Remote ,and General alarms. Relays can be set NO or NC Serial Interface Unit Interface Power Requirements 100-240 Vac 50/60 Hz Dimensions Shipping Weight |
| features |
MEASUREMENTS: Positive Peak Modulation in Percent Positive & Negative Peak Modulation Indicator |
Belar FMMA-1
In stock
| Weight | 5.4431 kg |
|---|---|
| features |
MEASUREMENTS: Total Peak Modulation in Percent Hold Time |
| specification |
SPECIFICATIONS: Accuracy: Display: 16 segment alphanumeric LED display for menus and parameters Input: Belar RFA-4 ,RFA-1A ,or DC-4 ,or RF transmitter sample (with Option 01 and Option 02) Option 01: Input: RFA-1A ,DC-4 ,or Option 02) Output: composite Signal/Noise: Distortion (IM): Distortion (THD): Option 02: Frequency Range: Input: 50 ohms ,BNC connector Outputs: 9-pin D connector to Wizard Signal/Noise: AM Noise Range: Synchronous AM Noise Range: |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
Belar FMHD-1
In stock
| Weight | 6.8039 kg |
|---|---|
| features |
Frequency Agile Antenna and High Level Inputs Pilot ,L ,R ,L+R ,and L−R R ,L+R ,L−R Audio ±375 ms to ±256 samples ,±5.8 ms Audio Polarity |
| specification |
RF Inputs Antenna Input 75 Ω ,F Connector RF Inputs 1 to 10 Vms ,50Ω ,BNC Connector Composite Outputs Analog (2) 75Ω Unbalanced BNC Connector Digital (2) 100Ω ,RJ-45 Audio Outputs Analog (8 Channel Assignable) 600Ω Balanced ,XLR Connector AES-3ID (6 Channel Assignable) 75 Ω ,BNC Connector Headphone (L/R Assignable) Computer Interface RS-232 Ethernet 10/100 Base-T Alarms Relays(4 Assignable) 15 pin Female D Connector Dimensions Power Requirements 100-240V ,50/60 Hz Shipping Weight |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
Belar FMCS-1L
In stock
| Weight | 6.8 kg |
|---|---|
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Metering Modulation (Peak ,Ave ,Min) Total ,L ,R ,L+R ,L!R 0.1% resolution Pilot 0.1% resolution RMS Total ,L ,R ,L+R ,L!R 0.1 dB resolution Flat & 50 µs or 75 µs AM Noise ,Sync AM Noise 0.1 dB resolution Separation 0.1 dB Crosstalk 0.1 dB resolution Composite Outputs Analog (2 buffered) 75Ω unbalanced BNC Connector Digital (2 buffered) 100Ω ,RJ-45 Connector Audio Outputs Analog Outputs (6 assignable) 600Ω balanced XLR Connector Analog Outputs (2 assignable) 75Ω unbalanced BNC Connector AES-3ID (8 assignable) 75Ω ,BNC Connector Headphone (assignable) Alarm Outputs Relays (4 assignable) 15-pin Female D-Sub Connector Computer Interface USB Ethernet 10/100 Base -T Dimensions 2 EIA Rack Units Power Requirements 100-240V 50/60 Hz Shipping Weight |
| features |
Frequency Agile RF input Composite ,and Audio FFT Spectrum Analysis |
