Sonifex RB-MM1
The Sonifex RB-MM1 is a unit for generating a suitable mix to send to a telephone hybrid or codec.
Original price was: €510.00.€485.00Current price is: €485.00.
The Sonifex RB-MM1 is a unit for generating a suitable mix to send to a telephone hybrid or codec.Whenever programming originates from outside the studio, or if listeners/viewers are calling up a phone-in using telephone hybrids or codecs, mix-minus feeds are required. Most telephone lines incur delays which prohibit off-air monitoring, because the caller, or remote talent, would hear their own voice in delay which is very disconcerting. The solution is to feed a mix back to the caller, minus his or her own voice. Some mixing desks do not have a dedicated telco channel to generate a clean-feed, or mix minus, so the RB-MM1 can be used.
The RB-MM1 is a unit for generating a suitable mix to send to a telephone hybrid or codec. A stereo output is taken from a mixer, together with a post fader output from the mono telephone fader on the mixer. The caller audio is removed from the station output so that it can be sent to the telephone line via the hybrid.
Analogue audio inputs and outputs are via Neutrik XLR connectors. The output level to the TBU can be adjusted using a rear panel pre-set potentiometer. To control the cancellation null (the amount of the telephone channel which is subtracted from the mixer output signal), 2 multi-turn potentiometers are provided, one for the LF null and the other for the full-band null. Additionally, a band pass filter can be switched in and out, via a rear panel switch, to condition the signal for the telephone hybrid. To use the RB-MM1 unit with full-band ISDN codecs, the band pass filter can be switched out. For stereo codecs, or conference calls, multiple RB-MM1 units can be used.
RB-MM1 Block Diagram.
Technical Specification For RB-MM1 | |
Audio Specification | |
| Maximum Input Level: | +28dBu |
| Input Impedance: | >20kΩ |
| Maximum Output Level: | +28dBu |
| Output Impedance: | <50 Ω |
| Output Gain Range: | Adjustable -15dB to +12dB, ref 0dBu gain via a multi-turn pot |
| Common Mode Rejection: | >60dB |
| Band Pass Filter Range: | 200Hz to 4kHz, 12dB/octave |
| LF Null Adjustment: | Better than 40dB at 100Hz |
| Mix-Minus Null: | Better than 40dB at 1kHz |
| Frequency Response: | 20Hz – 22kHz ± 0.1dB |
| Distortion: | 0.01% THD @ 1kHz, ref +8dBu output (C-Message weighted) |
| Noise: | -90dBu unity gain +6dBu |
Connections | |
| Analogue Inputs From Mixer Output: | 2 x XLR 3 pin female (balanced) (L & R) |
| Analogue Input From Telephone Fader: | 1 x XLR 3 pin female (balanced) (L & R) |
| Analogue Output To TBU: | 1 x XLR 3 pin male (balanced) (L & R) |
| Mains Input: | Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max. |
| Fuse Rating: | Anti-surge fuse 100mA 20 × 5 mm (230VAC) Anti-surge fuse 250mA 20 × 5 mm (115VAC) |
Equipment Type | |
| RB-MM1: | Mix-minus generator |
Physical Specification | |
| Dimensions (Raw): | 28 cm (W) x 10.8 cm (D) x 4.3 cm (H) 11” (W) x 4.3” (D) x 1.7” (H) |
| Dimensions (Boxed): | 36 cm (W) x 20.5 cm (D) x 6 cm (H) 14.2” (W) x 8” (D) x 2.4” (H) |
| Weight: | Nett: 1.1 kg Gross: 1.5 kg Nett: 2.4lbs Gross: 3.3lbs |
RB-MM1 Block Diagram.
Related Products
Barix Exstreamer 100
In stock
| Weight | 0.5 kg |
|---|---|
| Dimensions | 11 × 5 × 8 cm |
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Multiroom IP Audio System Receiver Internet Radio Receiver Instore Audio Player SIP and IP Paging Zone Device Digital Annunciator ,Message Player ,Message Repeater Generic VoIP decoder for IP Paging and Announcement applications Commercial Audio Streaming Applications |
| features |
AACplus ,MP3 ,Ogg Vorbis ,G.711 ,PCM linear Decoding UDP ,RTP ,Multicast plug included) |
Barix Exstreamer 200
In stock
| Weight | 0.5 kg |
|---|---|
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Electrical• 24 VDC ,70 Watt max. on 2.1mm barrel connector• 24 VDC Power supply (100-240 VAC) included • RJ-45 connector with integrated Link/Activity LED• Protocols: TCP/IP ,UDP ,RTP ,SIP ,DHCP ,Multicast capable• ES-100/spkr (Ethersound ,output ,no daisy-chain)support • 3.5 mm (1/8 inch) headphone jack ,• S/P DIF out (optical) ,• Output level software controllable• Frequency response (-3 dB) 19 Hz .. 20 kHz *• Dynamic range 94 dB• SNR/THD -94 dB ,<0.05%) up to 320 kbps ,8..48 kHz sample freq.• AAC-HE (AAC ,AAC plus ,AAC plus V2)• WMA (up to version 9) ,• Ogg Vorbis• PCM linear 16bit @8 ,16 ,22.05 ,24 ,32 ,44.1 ,48 kHz• G.711 ,uLaw ,aLaw (sample rates same as PCM) RS-232 Interface• 300..230‘400 Baud asynchronous ,• for serial tunneling or local control ,• 12 VDC supply output for external devices (100 mA max.)IR Interface• Built-in IR receiver ,IR remote control included ,• Optional external IR receiver via serial port (IR Kit)Mechanical• Aluminum case ,460g• rack and wall mountable using accessoriesDimensions (W x H x D)• 108 x 38 x 125 mm (4.25 x 1.5 x 4.92 inch)Model comparison• Model 200 Speaker output 2 x 25 Watt on 8 Ohm ,Memory USB • Model 205 Speaker output 2 x 25 Watt on 8 Ohm ,Memory MicroSD ,Line inMTBF • According MIL217F at 25°C• Exstreamer 200 min. 460 000h• Exstreamer 205 min. 410 000h*depends on used codec ,best results @48kHz PCM |
| features |
G.711 ,uLaw ,aLaw ,PCM Encoding MP3 ,Ogg Vorbis ,G.711 ,PCM linear Decoding UDP ,RTP ,Multicast included) |
Sonifex PS-PLAY
In stock
| Weight | 1.7 kg |
|---|---|
| Dimensions | 38 × 30 × 6 cm |
| video |
0 |
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Technical Specification For PS-PLAY Analogue Outputs: Analogue Max Output Level: Analogue Balanced Output Impedance: Analogue Unbalanced Output Impedance: Analogue Output SNR: Frequency Response: Output THD: Interchannel Isolation (Cross Talk): Analogue Output Gain Range: or optional IR controller Digital Outputs: Headphones Output: USB Port: GPOs (General Purpose Outputs): Serial Port: used to send control commands and update firmware Ethernet Port: IR Remote Receiver: Mains Input: 85 – 264VAC ,47 – 63 Hz ,10W max Fuse Rating: Audio Codec Specifications Decoder 44.1 and 48kHz ,CBR +VBR +ABR) 22.05 and 24kHz ,CBR +VBR +ABR) incl.SBR and PS) Supported Network Transport Protocols BOOTP ,IPZator or AUTOIP – Dynamic IP address resolution Physical Specification |
| Color |
Black |
| features |
IP to audio streamer. S/PDIF and TOSlink digital audio outputs. e.g. Shoutcast ,Icecast. |
