Sonifex RB-DS2
The Sonifex RB-DS2 is a stereo audio delay synchroniser used for resynchronising audio to video following delay processes such as standards conversion, transmission.
Original price was: €1,865.00.€1,775.00Current price is: €1,775.00.
Description
The Sonifex RB-DS2 is a high-quality stereo audio delay synchroniser, designed to resynchronise audio to video after various delay-inducing processes such as standards conversion, transmission delay, logo insertion, video aspect ratio conversion, and network delays. It supports digital audio signals up to 96kHz, 24 bit, ensuring superb sonic quality and smooth, silent switching for clean audio delay.
Key Features:
- Inputs & Outputs:
- Balanced analogue and AES/EBU digital audio on 3-pin XLR connectors.
- Can function as an A/D and D/A unit, allowing analogue inputs to be delayed and output as AES/EBU or vice-versa.
- Can be used in stereo, dual mono, or mono modes.
- Delay Capabilities:
- Standard delay: Up to 10.5 seconds at 96kHz, 24 bit (42 seconds at 48kHz, 16 bit).
- Expanded delay: With Compact Flash™ expansion (up to 2GB), delay times exceed 4 hours.
- Delay time units: Samples, fields, frames, meters, milliseconds, and hh:mm
(with CF expansion).
- User Interface:
- Blue vacuum fluorescent display with rotary controller.
- Settings include source selection (analogue/digital), channels, sample rate, bit width, format (PAL/NTSC), delay units, and delay time.
- Input peak levels: Selectable from +12dBu, +18dBu, and +24dBu for FSD.
- Rear panel pre-set potentiometers adjust input gain by ±3dB around the selected peak digits.
- Output Control:
- Analogue output gain: Adjustable in software from -6dBu to +24dBu output level, ref FSD.
- Separate muting for both analogue and digital outputs.
- Bypass function: Diverts both analogue and digital inputs to their outputs via electro-mechanical relays, also engaged automatically during power-fail.
- Remote and Security Features:
- Eight configurable settings can be saved and loaded, remotely controlled using GPI contacts.
- RS232 serial port for remote control.
- Front panel controls can be locked-out for remote operations or physical security.
Specifications:
- A/D Conversion:
- Maximum Input Level: +28dBu
- Input Impedance: > 10kΩ bridging
- Signal to Noise: Better than -101dBFS (RMS A-weighted at 24bit)
- Dynamic Range: > 110dB
- Distortion & Noise: > 96dB THD + N at 1kHz
- D/A Conversion:
- Maximum Output Level: +24dBu
- Output Impedance: < 50Ω
- Dynamic Range: > 100dB
- Sampling Frequency: Selectable 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz, or 96kHz
- Sample Width: Selectable 16bit or 24bit
- Physical and Electrical:
- Dimensions: 48cm (W) x 15.8cm (D) x 4.2cm (H) (1U)
- Weight: Nett 1.6kg, Gross 2.3kg
- Mains Input: Filtered IEC, 85-264 VAC, 47-63Hz, 60W peak, 30W average
- Fuse Rating: Anti-surge fuse 2A 20 x 5mm
- Connections:
- Analogue Inputs: 2 x XLR 3 pin female
- Analogue Outputs: 2 x XLR 3 pin male
- Digital Inputs: 1 x AES/EBU XLR 3 pin female
- Digital Outputs: 1 x AES/EBU XLR 3 pin male
- Remote I/O Port: 15-way ‘D’-type plug
- Serial Comms Port: 9-way ‘D’-type plug
- Memory Expansion: Internal Compact Flash™ storage card up to 2GB
This device is ideal for permanent installations needing consistent audio delay correction or for intermittent use, such as live link adjustments. Its versatility, high audio quality, and robust feature set make it suitable for a wide range of professional audio-visual applications.
Related Products
audio-technica BP4001
In stock
| Weight | 0.5 kg |
|---|---|
| specification |
Element: Dynamic Polar Pattern: Cardioid Frequency Response: 80-18 ,000 Hz Open Circuit Sensitivity: –54 dB (1.9 mV) re 1V at 1 Pa Impedance: 300 ohms Weight: 275 g (9.7 oz) Dimensions: 240.8 mm (9.48") long ,40.0 mm (1.57") head diameter Output Connector: Integral 3-pin XLRM-type Accessories Furnished: AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; foam windscreen; carrying case; soft protective pouch |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
dbx 286s
In stock
| Weight | 2.97 kg |
|---|---|
| Product can be split into multiple boxes |
0 |
| features |
Studio quality Mic Preamp/Channel Strip Processor |
| Ship Separately |
0 |
| specification |
Mic Preamp Connector Pin 2 Hot Mic Preamp Input Impedance Mic Preamp gain Mic Preamp Phantom Power applied to XLR pins 2 and 3 through 6.81kΩ resistors CMRR typically 55dB Mic Preamp max input level Gain = 30dB Mic Preamp Equivalent Input Noise (EIN) 22Hz-22kHz ,150Ω source impedance Input Connectors TIP Hot Input Impedance 20kΩ balanced Max Input balanced or unbalanced Input Gain Range Insert Connector ring is Return Insert Impedance Insert Max Level Insert Noise unweighted (20Hz-20kHz); LINE GAIN Control set to 0dB Insert Distortion 20Hz-20kHz ,+10dBu Output Connectors Output Impedance 200Ω balanced Max Output >+20dBm (600Ω load) Gain Adjustment Range Noise all processing controls OFF Frequency Response +0.5 ,-0.5dB THD 20Hz-20kHz ,+10dBu ,all Processing Controls OFF Compressor Threshold Range Compressor Threshold Characteristic Compressor Ratio Max Compression Compressor Attack Time down to 10ms for larage increases Compressor Release Time Compressor Distortion 20Hz-20kHz ,15dB G/R ,+10dBu Output ,DENSITY @ 0 IMD 15dB G/R ,+10dBu Output Level ,DENSITY @ 0 De-esser Characteristic De-esser Frequency Range 12dB/octave De-esser Release Time Enhancer HF Detail Characteristic approximately 15dB maximum HF boost Enhancer LF Detail Characteristic bell-shaped cut @250Hz ,ratio is approximately 2:1 Expander/Gate Threshold Range Expander/Gate Ratio Expander/Gate Max Depth Expander/Gate Attack Time approximately 2mS (at maximum attenuation) Expander/Gate Release Time approxiamtely 10mS/dB Expander/Gate Dynamic Range Power Consumption Operating Voltage 100VAC 50/60Hz; EU: 230VAC 50/60Hz Operating Temperature Dimensions Unit Weight Shipping Weight
|
Sonifex RB-LC3
In stock
| Weight | 1.45 kg |
|---|---|
| Dimensions | 36 × 21 × 6 cm |
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Technical Specification For RB-LC3 Connections Mains Input: 110V-240V auto- adjusting ,fused ,6W maximum Mains Outputs: 1A fused Fuse Rating (Mains Outputs): Telephone: Control Inputs & Outputs: Outputs: Open collector 20mA sink capability Equipment Type RB-LC3: Physical Specification Dimensions (Raw): 11” (W) x 4.3” (D) x 1.7” (H) (1U) Dimensions (Boxed): 14.2” (W) x 8” (D) x 2.4” (H) Weight: Nett: 2.2lbs Gross: 3.2lbs |
DEVA Broadcast DB8008
In stock
| Weight | 2.9 kg |
|---|---|
| Dimensions | 54 × 30 × 11.5 cm |
| specification |
Main Analog Audio InputsConnectorsBalanced XLRImpedance600Ω or high impedanceLevel2 ranges: 0 dBu or +12 dBu Jumper selectable ,with software adjustmentsDynamic range>80dBDigital Gain Adjust-10db to +10dBMain Digital Audio InputsConnectorsBalanced XLR ,Coaxial ,OpticalSample Rates32 ,44.1 ,48 ,96 kHzDigital Gain Adjust-10db to +10dBAux Analog Audio InputsConnectorsBalanced XLRImpedance600Ω or high impedanceLevel2 ranges: 0 dBu or +12 dBu Jumper selectable ,with software adjustmentsDynamic range>80dBDigital Gain Adjust-10db to +10dBAux Digital Audio InputsConnectorsBalanced XLR ,Coaxial ,OpticalSample Rates32 ,44.1 ,48 ,96 kHzDigital Gain Adjust-10db to +10dBIP Audio SourceNumber of Streamsone main and two alternative streams with auto-switch on failureStream Clientsshoutcast ,icecastStream FormatsPCM (32 ,44.1 ,48kHz) ,MPEG1 Layer 3 (MP3) ,HE-AAC (v.1 and v.2)Bit RatesAll standard bit rates ,including VBRNumber of ChannelsMono ,StereoBuffer Size Adjust5Kb to 64KbDigital Gain Adjust-10db to +10dBBuilt-In MP3 PlayerStorage Capacity2Gb on SD CardSupported encodersHE-AAC (v.1 and v.2) ,MPEG-1 Layer 3MP3 bit rates32-320 kbps and VBRSample ratesAll sampling frequencies specified by MPEG1 L1/L2/L3 (32 ,44.1 and 48kHz);MPEG2 L1/L2/L3 (16kHz ,22.05kHz and 24kHz) and MPEG2.5 L3 (8kHz ,11.025kHz ,and 12kHz)Supported file types*.MP3 ,*.AAC ,*.M4A ,*.M3UPlayback modesAlphabetical ascending and descending ,Shuffle ,Playlist and Shuffled playlistRemote file managementBuild-in FTP serverDigital Gain Adjust-10db to +10dBAnalog Audio OutputConnectorBalanced XLRFrequency response±0.5dB ,5Hz-20kHzDistortion80dBDigital Gain Adjust-10db to +10dBDigital Audio OutputsConnectorsBalanced XLR ,Coaxial ,OpticalSample rates32 ,44.1 ,48kHzDigital Gain Adjust-10db to +10dBPhones Audio OutputConnector1/4" (6.3mm) jack ,stereoTypeHeadphonesSilence DetectorThresholdAdjustable from -40dBfs to -5dBfsTrigger time10-250 secUser InterfaceIndicators5 LEDs on front panel ,2 LEDs on rear panelWeb interfacecontrol ,configuration and status informationSNMP interfacecontrol ,configuration and status informationFront PanelLCD with KeyboardNetworkConnectorRJ-45TypeEthernetDevice DiscoveryUPnP supportOperating conditionsTemperature10°C – 45°CHumidity< 75% ,non-condensingPower RequirementsVoltage115/230V AC (internal switch) ,18VAConnectorIEC320 ,rear panelSize and WeightDimension (W x H x D)1U ,19" x 1.7" x 6.9" ,483 x 45 x 160 mmWeight8 lbs ,3kg |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
Reviews
There are no reviews yet