Sonifex RB-DS2
The Sonifex RB-DS2 is a stereo audio delay synchroniser used for resynchronising audio to video following delay processes such as standards conversion, transmission.
Original price was: €1,865.00.€1,775.00Current price is: €1,775.00.
Description
The Sonifex RB-DS2 is a high-quality stereo audio delay synchroniser, designed to resynchronise audio to video after various delay-inducing processes such as standards conversion, transmission delay, logo insertion, video aspect ratio conversion, and network delays. It supports digital audio signals up to 96kHz, 24 bit, ensuring superb sonic quality and smooth, silent switching for clean audio delay.
Key Features:
- Inputs & Outputs:
- Balanced analogue and AES/EBU digital audio on 3-pin XLR connectors.
- Can function as an A/D and D/A unit, allowing analogue inputs to be delayed and output as AES/EBU or vice-versa.
- Can be used in stereo, dual mono, or mono modes.
- Delay Capabilities:
- Standard delay: Up to 10.5 seconds at 96kHz, 24 bit (42 seconds at 48kHz, 16 bit).
- Expanded delay: With Compact Flash™ expansion (up to 2GB), delay times exceed 4 hours.
- Delay time units: Samples, fields, frames, meters, milliseconds, and hh:mm
(with CF expansion).
- User Interface:
- Blue vacuum fluorescent display with rotary controller.
- Settings include source selection (analogue/digital), channels, sample rate, bit width, format (PAL/NTSC), delay units, and delay time.
- Input peak levels: Selectable from +12dBu, +18dBu, and +24dBu for FSD.
- Rear panel pre-set potentiometers adjust input gain by ±3dB around the selected peak digits.
- Output Control:
- Analogue output gain: Adjustable in software from -6dBu to +24dBu output level, ref FSD.
- Separate muting for both analogue and digital outputs.
- Bypass function: Diverts both analogue and digital inputs to their outputs via electro-mechanical relays, also engaged automatically during power-fail.
- Remote and Security Features:
- Eight configurable settings can be saved and loaded, remotely controlled using GPI contacts.
- RS232 serial port for remote control.
- Front panel controls can be locked-out for remote operations or physical security.
Specifications:
- A/D Conversion:
- Maximum Input Level: +28dBu
- Input Impedance: > 10kΩ bridging
- Signal to Noise: Better than -101dBFS (RMS A-weighted at 24bit)
- Dynamic Range: > 110dB
- Distortion & Noise: > 96dB THD + N at 1kHz
- D/A Conversion:
- Maximum Output Level: +24dBu
- Output Impedance: < 50Ω
- Dynamic Range: > 100dB
- Sampling Frequency: Selectable 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz, or 96kHz
- Sample Width: Selectable 16bit or 24bit
- Physical and Electrical:
- Dimensions: 48cm (W) x 15.8cm (D) x 4.2cm (H) (1U)
- Weight: Nett 1.6kg, Gross 2.3kg
- Mains Input: Filtered IEC, 85-264 VAC, 47-63Hz, 60W peak, 30W average
- Fuse Rating: Anti-surge fuse 2A 20 x 5mm
- Connections:
- Analogue Inputs: 2 x XLR 3 pin female
- Analogue Outputs: 2 x XLR 3 pin male
- Digital Inputs: 1 x AES/EBU XLR 3 pin female
- Digital Outputs: 1 x AES/EBU XLR 3 pin male
- Remote I/O Port: 15-way ‘D’-type plug
- Serial Comms Port: 9-way ‘D’-type plug
- Memory Expansion: Internal Compact Flash™ storage card up to 2GB
This device is ideal for permanent installations needing consistent audio delay correction or for intermittent use, such as live link adjustments. Its versatility, high audio quality, and robust feature set make it suitable for a wide range of professional audio-visual applications.
Related Products
dbx 286s
In stock
| Weight | 2.97 kg |
|---|---|
| Product can be split into multiple boxes |
0 |
| features |
Studio quality Mic Preamp/Channel Strip Processor |
| Ship Separately |
0 |
| specification |
Mic Preamp Connector Pin 2 Hot Mic Preamp Input Impedance Mic Preamp gain Mic Preamp Phantom Power applied to XLR pins 2 and 3 through 6.81kΩ resistors CMRR typically 55dB Mic Preamp max input level Gain = 30dB Mic Preamp Equivalent Input Noise (EIN) 22Hz-22kHz ,150Ω source impedance Input Connectors TIP Hot Input Impedance 20kΩ balanced Max Input balanced or unbalanced Input Gain Range Insert Connector ring is Return Insert Impedance Insert Max Level Insert Noise unweighted (20Hz-20kHz); LINE GAIN Control set to 0dB Insert Distortion 20Hz-20kHz ,+10dBu Output Connectors Output Impedance 200Ω balanced Max Output >+20dBm (600Ω load) Gain Adjustment Range Noise all processing controls OFF Frequency Response +0.5 ,-0.5dB THD 20Hz-20kHz ,+10dBu ,all Processing Controls OFF Compressor Threshold Range Compressor Threshold Characteristic Compressor Ratio Max Compression Compressor Attack Time down to 10ms for larage increases Compressor Release Time Compressor Distortion 20Hz-20kHz ,15dB G/R ,+10dBu Output ,DENSITY @ 0 IMD 15dB G/R ,+10dBu Output Level ,DENSITY @ 0 De-esser Characteristic De-esser Frequency Range 12dB/octave De-esser Release Time Enhancer HF Detail Characteristic approximately 15dB maximum HF boost Enhancer LF Detail Characteristic bell-shaped cut @250Hz ,ratio is approximately 2:1 Expander/Gate Threshold Range Expander/Gate Ratio Expander/Gate Max Depth Expander/Gate Attack Time approximately 2mS (at maximum attenuation) Expander/Gate Release Time approxiamtely 10mS/dB Expander/Gate Dynamic Range Power Consumption Operating Voltage 100VAC 50/60Hz; EU: 230VAC 50/60Hz Operating Temperature Dimensions Unit Weight Shipping Weight
|
Sonifex RB-DA6
In stock
| Weight | 1.9 kg |
|---|---|
| Dimensions | 58.5 × 22.5 × 7 cm |
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Technical Specification For RB-DA6 Audio Specification Maximum Input Level: Maximum Output Level: Frequency Response: ref 1kHz) Gain Range: Common Mode Rejection: Input impedance: Output impedance: Distortion: ref +8dBu output Noise: ref +8dBu output Connections Inputs: can be unbalanced) Outputs: can be unbalanced) Mains Input: switchable 110-120V ,or 220-240V ,fused ,6W max Fuse Rating: Equipment Type RB-DA6: Physical Specification Dimensions (Raw): Dimensions (Boxed): Weight: |
DEVA Broadcast DB8009-MPX
In stock
Furman F1500-UPS E
In stock
| Weight | 32.5 kg |
|---|---|
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Nominal Line Voltage: UPS Input Voltage: Frequency: UPS Output Voltage: Frequency: Current Rating: UPS Output Capacity: 900W ,cos 0.6 UPS Backup Time: 32 minutes at half load UPS Transfer Time: Automatic Voltage Regulation Standard Mode Capture Range: Standard Mode Output Range: Sensitive Mode Capture Range: Sensitive Mode Output Range: Nominal Line Voltage: Surge Protection Technology: Overvoltage Shutoff ,fast rise: Overvoltage Shutoff ,slow rise: Noise Attenuation: 40 dB @ 100 kHz ,50 dB @ 500kHz Linear Attenuation Curve: UPS Physical Attributes UPS Topology: Temperature Rating: Mass: Dimensions: Battery: Plug: Detachable male Schuko with retention clips Display: Backlit blue Specifications subject to change due to product upgrades and improvements. |
| features |
1500VA Battery Backup maintains critical data and allows orderly shutdown inthe event of a power outage sold separately) provides remote control to reboot components ,power equipment on or off ,and monitor power quality from anywhere in the world |
Reviews
There are no reviews yet