The Henry Series 80 PowerClamp is a sophisticated surge suppression unit that offers the ultimate in transient protection.
Sine Control PowerClamp Series 1 $ 495.86
Back to products
The Henry Series 80 PowerClamp is a sophisticated surge suppression unit that offers the ultimate in transient protection.
Sine Control PowerClamp Series 10 $ 3,494.34
The Henry Series 80 PowerClamp is a sophisticated surge suppression unit that offers the ultimate in transient protection.
Click to enlarge

    Sine Control PowerClamp Series 8

    Surge Suppressor

    Sine Control PowerClamp Series 8 is a sophisticated surge suppression unit that offers the ultimate in transient protection.

     

    $ 2,091.94

    SKU: 101770 Brand: Sine Control Technology

    Sine Control PowerClamp Series 8

    Sine Control PowerClamp Series 8 is a sophisticated surge suppression unit that provides the ultimate in transient protection with much lower clamping levels than any other TVSS device.

    POWERCLAMP Series 8 wire-in PARALLEL TVSS devices are ideally suited for hospitals, airports, data centres, military installations, manufacturing plants and similar mission-critical facilities. They are rated at 150,000 surge amps per phase, and will suppress lightning induced transients, massive high energy surges, and power line spikes. POWERCLAMP Series 8 units prevent power surges from damaging computers and other sensitive equipment. Their superior surge suppression will greatly improve system reliability and prevent the failures that are caused by power line disturbances. Operation is not affected by the power requirements of the load. Each line phase is fused, with a fuse status lamp. An unlikely failure will not interrupt power to the load. The Series 8 offers optional remote failure detection to monitor the suppression integrity of the device from a remote location. A Series 8 unit should be installed at the main entry electrical panel in any location where uncompromised surge and spike protection is necessary.

    HOW POWERCLAMP OPERATES

    POWERCLAMP Transient Voltage Surge Suppressor (TVSS) device is a passive, multi-staged hybrid high energy parallel device designed to react to the onset of surges with fast rise times and high amplitude ranges such as those which follow sags or other external or atmospheric induced impulses. POWERCLAMP senses the fast ramp of the transient and automatically fixes on the peak of the line voltage waveform. The unit incorporates sine wave tracking, to ‘float’ the clamping threshold with the rise and fall of the peak of the AC waveform without creating wave shape distortion. Response times are within 1-2 nanoseconds. POWERCLAMP will clamp many transients to within 2 volts of the AC waveform. Units operate at up to 120% of the normal line voltage.

    Related Products

    The Henry Series 80 PowerClamp is a sophisticated surge suppression unit that offers the ultimate in transient protection.

    Sine Control Powerclamp Series 2

    In stock

    Call for price
    Call for price
    Weight 3.6287 kg
    features

    40

    ,

    000 Surge Amps Per Mode
    2 Volt Clamping Level
    1-2 Nanosecond Response Time
    Parallel Wire-in Design 
    High Energy Dissipation
    Maintenance Free
    Sine wave tracking
    Simple Installation
    Meets ANSI/IEEE C62-41 1980
    Meets UL-1449-1994
    Non-degrading
    Passive System
    Fault Indicating LEDs
    Full Voltage Range
    Voltage Reactive
    5 Year Warranty
    specification

    TECHNICAL SPECIFICATIONS:
    POWERCLAMP is a sophisticated surge suppression unit that offers the ultimate in transient protection

    ,

    with ULTRA-LOW CLAMPING LEVELS. Its PARALLEL INSTALLATION provides these benefits:
    • No chance of power interruption
    • No need to match load power
    • No insertion power loss
    When tested to the ANSI/IEEE C62.41-1991/UL-1449 Standard

    ,

    its hybrid multistage circuitry will suppress (clamp) transient surges and spikes in all modes and bi-directionally

    ,

    as listed below.
    Category A waveform (6kV

    ,

    200amps

    ,

    0.5us

    ,

    100kHz): TWO (2) VOLTS of the peak of the sine wave.
    Measured from the baseline at the 90º point of the power sine wave (@ WAVEFORM PEAK).
    Category B ringwave (6kV

    ,

    500amps

    ,

    0.5us

    ,

    100kHz): TEN (10) VOLTS of the peak of the sine wave.
    Measured from the baseline at the 90º point of the power sine wave (@ WAVEFORM PEAK).
    Category B impulse (6kV

    ,

    1.2/50us

    ,

    3

    ,

    000 amps): THIRTY (30) VOLTS of the peak of the sine wave.
    Measured from the baseline at the 90º point of the power sine wave (@ POSITIVE WAVEFORM PEAK).

     

    Unit
    Type
    Max
    Surge
    Surge
    Models of
    Connection

    Model
    Service
    RMS
    Joules
    Amps 20
    Protection
    Wiring

    Number
    40-420Hz
    Voltage
    Per Ø
    microsec
     
     

    *120VF2
    120V 1Ø
    0-135 L-N
    672
    40

    ,

    000
    L-N/L-G/N-G
    1-L

    ,

    1-N

    ,

    1-G

    1240VF2
    120/240V 1Ø
    0-135 L-N
    672
    40

    ,

    000
    L-L/L-N/L-G
    2-L

    ,

    1-G

    *1240VF3
    120/240V 1Ø
    0-135 L-N
    672
    40

    ,

    000
    L-L/L-N/L-G/N-G
    2-L

    ,

    1-N

    ,

    1-G

    1208VF3
    120/208V 3Ø WYE
    0-135 L-N
    672
    40

    ,

    000
    L-L/L-N/L-G
    3-L

    ,

    1-G

    *1208VF4
    120/208V 3Ø WYE
    0-135 L-N
    672
    40

    ,

    000
    L-L/L-N/L-G/N-G
    3-L

    ,

    1-N

    ,

    1-G

    240VF3
    240V 3Ø DELTA
    0-270 L-L
    1400
    40

    ,

    000
    L-L/L-G
    3-L

    ,

    1-G

    L-L = line to line; L-N = line to neutral; L-G = line to ground; N-G = neutral to ground common mode*
    *Common mode: Neutral to Ground

    ,

    needed when not installed at main panel where Neutral and Ground are tied.
    Ship Separately

    0
    Product can be split into multiple boxes

    0
    -8%

    Furman M-10x E

    In stock

    Original price was: $ 215.84.Current price is: $ 198.34.
    Add to Cart
    Weight 2.3 kg
    features

    <ul>
    <li>Noise Filtration: AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)</li>
    <li>Surge Protection: Spike & surge protection ensures equipment stays safe and your power stays clean</li>
    <li>11 Total Outlets: 10 rear panel outlets and 1 front panel convenience outlet</li>
    <li>10 Amp Rating: 10 amp rating

    ,

    with circuit breaker</li>
    <li>"Protection OK" Indicator: Front panel indicator LED lets you know that your equipment is being protected</li>
    </ul>
    specification

    <table style="width: 500px;" border="0" cellspacing="0" cellpadding="0" align="center">
    <tbody>
    <tr>
    <td>
    <div id="container-1">
    <div id="fragment-2" class="tabbedcontent tabs-container" title="Specifications">
    <table border="0" cellspacing="0" cellpadding="5">
    <tbody>
    <tr>
    <td class="spec_title" width="40%"><strong>Maximum Output Current:</strong></td>
    <td class="spec_content">10 amps</td>
    </tr>
    <tr>
    <td class="spec_title"><strong>Line Cord:</strong></td>
    <td class="spec_content">1.5 meter

    ,

    removable

    ,

    IEC C-13 female to Schuko male</td>
    </tr>
    <tr>
    <td class="spec_title"><strong>Operating Voltage:</strong></td>
    <td class="spec_content">230VAC 50Hz</td>
    </tr>
    <tr>
    <td class="spec_title"><strong>Spike Protection Mode:</strong></td>
    <td class="spec_content">Line to neutral</td>
    </tr>
    <tr>
    <td class="spec_title"><strong>Energy Dissipation:</strong></td>
    <td class="spec_content">305 joules</td>
    </tr>
    <tr>
    <td class="spec_title"><strong>Peak Impulse Current:</strong></td>
    <td class="spec_content">12

    ,

    000 amps</td>
    </tr>
    <tr>
    <td class="spec_title"><strong>Maximum Continuous Operating Voltage:</strong></td>
    <td class="spec_content">650 Volts</td>
    </tr>
    <tr>
    <td class="spec_title"><strong>Noise Attenuation:</strong></td>
    <td class="spec_content">Transverse mode: Greater than 20dB

    ,

    1.5Mhz to 200 Mhz</td>
    </tr>
    <tr>
    <td class="spec_title"><strong>Dimensions:</strong></td>
    <td class="spec_content">1.75” H x 19” W x 7.5” D</td>
    </tr>
    <tr>
    <td class="spec_title"><strong>Weight:</strong></td>
    <td class="spec_content">2.3 kg.</td>
    </tr>
    <tr>
    <td class="spec_title"><strong>Safety Agency Listing:</strong></td>
    <td class="spec_content">CE</td>
    </tr>
    <tr>
    <td class="spec_title"><strong>Warranty:</strong></td>
    <td class="spec_content">Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.</td>
    </tr>
    </tbody>
    </table>
    </div>
    </div>
    </td>
    </tr>
    </tbody>
    </table>
    Ship Separately

    0
    Product can be split into multiple boxes

    0
    The Henry Series 80 PowerClamp is a sophisticated surge suppression unit that offers the ultimate in transient protection.

    Henry Series 80 PowerClamp

    In stock

    Original price was: $ 1,650.92.Current price is: $ 1,569.25.
    Select options
    Weight 3.6287 kg
    Product can be split into multiple boxes

    0
    Ship Separately

    0
    specification

    Technical Specifications:

    Response time:
    1-2 nanoseconds

    Maximum leakage current:
    3mA

    Fusing:
    One fuse per phase with failure indicator lamps

    Minimum Humidity Range:
    5% to 97%

    Operating temperature:
    -20ºC (-68º F) to 70º C (158º F) ambient temperature

    Dimensions:
    (all units) 6" wide

    ,

    6" high

    ,

    4" deep

    Shipping weight:
    approximately 8 lbs. (including packaging)
    features

    FEATURES AND BENEFITS:

    60

    ,

    000 Surge Amps Per Mode
    High Energy Dissipation
    Meets ANSI/IEEE C62-41 1980 
    Fault Indicating lamps
    2 Volt Clamping Level
    Maintenance Free
    Meets UL-1449-1994
    Full Voltage Range
    1-2 Nanosecond Response Time
    Sine wave tracking
    Non-degrading
    Voltage Reactive
    Parallel Wire-in Design
    Simple Installation
    Passive System
    5 Year Warranty
    -5%

    Furman P-3600 AR G

    In stock

    Original price was: $ 8,312.92.Current price is: $ 7,904.56.
    Add to Cart