Sielco EXC2000GX is a compact 2kW solid-state FM transmitter with LCD control, a 7/16 RF output and optional stereo encoding, digital audio and remote-control facilities.
€9,995.00
Sielco EXC2000GX – Compact 2 kW Solid-State FM Transmitter provides 2,000 W nominal RF output in a 19-inch, 3U enclosure. Operating across 87.5–108 MHz, it combines a compact transmitter platform with front-panel control and configuration-dependent expansion options. A 50-ohm RF output with a 7/16 connection supports integration with a suitably rated transmission line and antenna system.
The EXC2000GX is the 2,000 W model in Sielco’s GX transmitter range. Published specifications provide frequency selection in 10/100 kHz steps and adjustable audio/MPX input sensitivity. The transmitter accommodates mono or externally generated composite MPX signals, while an internal stereo encoder is available as an option. Specify the required signal path before ordering.
Sielco EXC2000GX uses an LCD display, multifunction rotary control and accessible menus for setup and operation. The manufacturer’s quick-start guide describes frequency selection and output-power adjustment through this interface. Final commissioning requires a suitable RF load, correct source levels and verification of transmitter modulation.
Available options on the Sielco EXC2000GX include a stereo encoder, AES/EBU digital audio input, Ethernet connectivity with SNMP support, GSM telemetry and RS-232/485 serial interfaces. These facilities are configuration-dependent and should not be assumed to be installed in every unit. Confirm the required options and their compatibility with the intended studio and transmitter-site equipment.
The manufacturer specifies dimensions of 483 × 133 × 585 mm and a product weight of 33 kg. Earlier documentation lists a different weight, so obtain the drawing and weight for the supplied revision before preparing rack support or shipping arrangements. Confirm mains requirements, ventilation clearance and RF cabling as part of installation planning.