Heil Sound HB-1
Mic Boom
The HB-1 is an articulated arm which is of very substantial steel channel structure and balanced by four external springs.
€52.00
Description
To answer the many requests for an economy microphone boom, we present the Heil HB-1.
The HB-1 is an articulated arm which is of very substantial steel channel structure and balanced by four external springs. Capable of supporting microphones up to 2.5 lbs, the HB-1 has a reach of 40″.
The HB-1 is shipped with a brass lined ‘C’ clamp mount that accept up to a 1.5″ thick table. The HB-1 will fit all of the brass lined Heil mounting accessories:
DT-1 Flush Mount that mounts through a 1.5″ hole in the desk top
FL-2 Flange Mount secures to any flat surface
WM-1 Wall Mount
RS-1 12″ Riser Mount
The HB-1 Boom accepts all of the standard 5/8″ -27 threaded microphone hardware.
The threaded chrome stem can be secured into it’s needed position by tightening the thumb screw.
Heil Sound, Ltd. warrants all accessories to the original purchaser for a period of one year (parts) and ninety days (labor) from the date of purchase.
Related Products
AKG C1000 S
In stock
| Weight | 0.5 kg |
|---|---|
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
General Audio Frequency bandwidth 50 to 20000 Hz Sensitivity 6 mV/Pa Equivalent Noise Level 21 dB-A Signal to Noise 73 dB-A Preattenuation Pad 10 dB Bass Cut Filter 80 Hz Electrical Impedance 200 Ohms Recommended Load Impedance 2000 Ohms Polar Patterns Cardiod Hyper Cardiod Powering Interface Voltage 9 to 52 V Current 3 mA Audio Output Type Balanced XLR Gender Male Contacts 3-pin Design Body metal Finish matte grayish blue Dimensions / Weight Length 229 mm Height 34 mm Diameter 34 mm Net Weight 320 g |
RØDE Procaster
In stock
| Weight | 1.1 kg |
|---|---|
| Dimensions | 35 × 15 × 10 cm |
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Procaster Specifications: Acoustic Principle Address Type Frequency Range Output Impedance Sensitivity Weight Dimensions |
Electro-Voice RE50B
In stock
| Weight | 0.269 kg |
|---|---|
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Broadcast Microphones Case Material Connector Type Diameter (Max) Element Finish Frequency Response 000 Hz Impedance ,Low-Z balanced Mic Type Open Circuit Voltage Polar Pattern Power Requirement Height Weight Net |
| features |
Omnidirectional polar pattern temperature extremes ,and corrosive salt air |
Electro-Voice RE27N/D
In stock
| Weight | 0.709 kg |
|---|---|
| features |
Variable-D™ for minimal proximity effect -12 dB from 1000-100 Hz and -3 dB high frequency roll-off |
| specification |
Broadcast Microphones Case Material Connector Type Diameter (Max) Element Finish Frequency Response 000 Hz Impedance ,Low-Z balanced Mic Type Open Circuit Voltage Polar Pattern Power Requirement Height Weight Net |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
audio-technica BP4071
In stock
| Weight | 1 kg |
|---|---|
| specification |
Element: Externally polarized (DC bias) capacitorPolar Pattern: Line + gradientFrequency Response: 20-20 ,000 HzLow Frequency Roll Off: 80 Hz ,12 dB/octaveOpen Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 PaImpedance: 50 ohmsMaximum Input Sound Level: 141 dB SPL ,1 kHz at 1% T.H.D.; with 10 dB pad (nominal)Dynamic Range: 128 dB ,1 kHz at Max SPLSignal to Noise Ratio: 81 dB ,1 kHz at 1 PaPhantom Power Requiremens: 48V DC ,4.8 mA typicalWeight: 136 g (4.8 oz)Dimensions: 395.0 mm (15.55") long ,21.0 mm (0.83") maximum body diameterOutput Connector: Integral 3-pin XLRM-typeAccessories: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8145 windscreen; two O-Rings; protective carrying case |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
Aphex 188
In stock
| Weight | 4 kg |
|---|---|
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
| specification |
Balanced analog outputs 2 ADAT outputs Internal clock: 44.1 ,48 ,88.2 ,96kHz External clock input from 44.1 to 96kHz Word clock output Automatic ADAT SMUX output for 88.2 and 96kHz Selectable SMUX for 44.1 and 48kHz 65dB total gain ,26dB fixed gain ,39dB variable gain 26dB PadPolarity reverse Low cut filter @ 80Hz Max output level +21dBu EIN: -125dBu |
| features |
Eight High Quality Remote Mic Preamps in One Rack Space MIDI ,1788A-RC |
Reviews
There are no reviews yet