WE SHIP WORLDWIDE

Glensound Signature HA1M Two Channel Headphone Amplifier

Glensound Signature HA1M is a two-channel headphone amplifier with balanced XLR inputs, mono/stereo selection, independently driven headphone sockets and a balanced mono mix output.

Glensound Signature HA1M Two Channel Headphone Amplifier provides flexible analogue monitoring for broadcast and production installations. Its two XLR inputs accept either a stereo source or two mono sources, with separate level controls for each input. Selectable mono and stereo operation allows the same unit to handle conventional programme monitoring or a combined feed from two independent audio sources.

Selectable Mono and Stereo Monitoring

In stereo mode, the Glensound Signature HA1M left input feeds the left ear and the right input feeds the right ear, with each control adjusting its corresponding channel. In mono mode, both inputs feed both ears, allowing the operator to balance the two sources using the input controls. The front-panel gain range extends from −70 dB to +10 dB.

Independent Headphone Drivers and Mix Output

Glensound Signature HA1M provides 6.35 mm and 3.5 mm headphone sockets with independent drivers. Both sockets can be used simultaneously with different headphone impedances, and the circuitry accepts stereo headphones or mono single-earpiece connections. Supported headphone impedance is 32–1000 ohms, with automatic level correction for low- and high-impedance loads. A rear-panel XLR supplies a mono mix of both inputs for connection to other equipment.

Balanced Connections and Flexible Powering

The rear-panel audio inputs and mix output are electronically balanced and can accommodate correctly wired unbalanced connections. An internal switch-mode supply accepts 100–240 V AC through a filtered IEC inlet. A separate four-pin XLR accepts external ±12 V DC for compatible powering or supply redundancy. The anodised, laser-etched aluminium enclosure occupies 1U when fitted with rack ears and weighs 0.94 kg.

Basic Specifications

  • Factory model: Signature HA1M.
  • Audio inputs: two electronically balanced XLRs.
  • Operating modes: stereo or two-input mono mix.
  • Headphone sockets: 6.35 mm and 3.5 mm, independently driven.
  • Headphone impedance: 32–1000 ohms.
  • Input gain adjustment: −70 dB to +10 dB.
  • Mix output: balanced XLR; maximum level +24 dBu.
  • Mix output impedance: 50 ohms.
  • Mains input: 100–240 V AC, 47–63 Hz.
  • AC consumption: 1.5 W at 230 V AC.
  • External DC input: four-pin XLR, ±12 V.
  • Chassis dimensions: 336 × 123 × 44 mm, excluding rack ears.
[prm_product_reviews]