WE SHIP WORLDWIDE

AudioScience Iyo-Dante 16.16MR 16×16 RJ45 Audio Interface

AudioScience Iyo-Dante 16.16MR is a 16×16 Dante interface with StudioHub RJ45 analogue I/O, individual phantom power, 32-bit conversion, AES67 interoperability, isolated GPIO and web control.

AudioScience Iyo-Dante 16.16MR – 16×16 RJ45 Audio Interface connects sixteen balanced microphone/line inputs and sixteen balanced line outputs to a Dante network. StudioHub-format RJ45 connections carry analogue audio, while two dedicated Ethernet ports handle network traffic. The 1U enclosure also includes isolated GPIO for external control connections.

Sixteen Inputs and Sixteen Outputs

Inputs accommodate levels from −60 to +24 dBu in 1 dBu steps, with a 10-kilohm impedance. Balanced outputs support up to +24 dBu into loads of 2 kilohms or greater. Both conversion stages use 32-bit oversampling. Published sample rates are 44.1, 48 and 96 kHz.

Individual Phantom-Power Control

AudioScience Iyo-Dante 16.16MR provides individually switchable 48 V phantom power. Maximum current is 10 mA per channel, subject to an 80 mA total across sixteen inputs. Phantom power requires input gain above 24 dB. Check microphone current requirements and gain settings before deployment.

StudioHub Connections and Isolated GPIO

Use audio cabling and adapters that follow the documented StudioHub pinout. The analogue RJ45 sockets are not Ethernet connections. Two DB15 GPIO ports each provide five opto-isolated inputs and five relay-isolated outputs, giving ten inputs and ten outputs in total. The web interface displays input states and provides output controls.

Network Routing and Monitoring

Dante Controller manages audio subscriptions. The embedded web interface provides gain, phantom-power switching, input muting, output-level adjustment and metering. Front-panel RGB LEDs show channel levels and streaming status. AES67 mode supports compatible network integrations.

Network and Power Flexibility

Dual Ethernet ports support redundant Dante or switched operation. The internal supply accepts 90–260 V AC at 47–63 Hz. An optional external 12 V DC supply enables independent operation or AC/DC failover redundancy.

Basic Specifications

  • Analogue I/O: sixteen balanced inputs and sixteen balanced outputs.
  • Audio connections: StudioHub-format RJ45.
  • Conversion: 32-bit A/D and D/A.
  • GPIO: two DB15 ports, each with five inputs and five outputs.
  • Network: dual 100/1000 Mb/s Ethernet.
  • Protocols: Dante with AES67 interoperability.
  • Dimensions: 482 × 152 × 44 mm.
[prm_product_reviews]