AudioScience Iyo-Dante 0.16LR is a 16-output Dante interface with StudioHub RJ45 analogue connections, 32-bit D/A conversion, AES67 interoperability, isolated GPIO and browser-based output-level control.
$ 2,610.00
AudioScience Iyo-Dante 0.16LR – 16-Output RJ45 Interface converts sixteen channels of Dante network audio into balanced analogue line outputs. StudioHub-format RJ45 audio connections and isolated GPIO support integration with compatible broadcast and installed-audio equipment. This output-only interface occupies 1U in a standard 19-inch rack and has no analogue inputs.
The AudioScience Iyo-Dante 0.16LR analogue RJ45 sockets follow the StudioHub pinout and are separate from the dedicated Ethernet ports. Outputs support levels up to +24 dBu into loads of 2 kilohms or greater. Browser-based controls set the analogue amplitude corresponding to a full-scale digital signal, allowing alignment with connected equipment.
AudioScience Iyo-Dante 0.16LR uses 32-bit oversampling D/A conversion, with published sample rates of 44.1, 48 and 96 kHz. Dante Controller manages subscriptions from network sources to receiver channels. AES67 mode supports compatible network integrations, subject to the required stream format, clocking and firmware.
Two DB15 ports each provide five opto-isolated inputs and five relay-isolated outputs, giving ten control inputs and ten outputs overall. The embedded web interface provides output-level adjustment, metering, GPIO control and device settings. Front-panel RGB LEDs display channel levels and streaming status, with separate system, synchronisation and power indicators.
Two dedicated Ethernet ports support redundant Dante connections or switched operation. The internal universal supply accepts 90–260 V AC at 47–63 Hz. An optional external 12 V DC supply provides an independent power path. AC and DC may operate separately or together for failover redundancy.