




Allen & Heath XB-14-2
The Allen & Heath XB-14 is designed for a broad range of applications from small radio or internet broadcast studios, to larger studios.
$ 1,905.79 Original price was: $ 1,905.79.$ 1,814.77Current price is: $ 1,814.77.
The Allen & Heath XB-14-2 offers a host of specialised broadcast features that normally come at a much higher price, including telephone communication (telco) channels, mic channel ON switch sensing, stereo channel start/cue outputs for playback device control, automatic muting of speaker outputs and much more.
Related Products
Solidyne 2600
In stock
Weight | 2 kg |
---|---|
Product can be split into multiple boxes |
0 |
Ship Separately |
0 |
specification |
Specifications Audio Inputs One balanced stereo line (or mono Mic in 2610 & 2612); and one unbalanced AUX. Option USB 2602 ,2 stereo Digital inputs & 2 stereo Digital outputs by USB Inputs Level/Impedance Balanced LINE = -20 dBu/+22 dBu; 600~ 10Kohms Unbalanced AUX = -20 dBu/+15dBu; 600~ 10Kohms Inserts for both MIC inputs in microphone modules. Stereo insert for LINE A in LINE modules. Phantom 48v Outputs AUX Unbalanced + 4 dBm Balanced Outs; Max Level +26dBu (10K) ,+20dBm (600ohms) Unbalanced Outs; Max Level = +20dBm/600 ohms Optional Digital AES/EBU output for PGM & AUD. Digital Levels Monitor & Hybrid Outputs +4dBu / 10K 1 Hybrid On-Air Receive + 4 dBu/10K 1 Hybrid send (MIX-Minus) +4 dBu / 10K CUE Monitor with Muting Relays (line level). Microphone Processor 160mm wide ,with 3 MIC with processing facilities. 4 band EQ ,80 Hz and 10 kHz shelving ,160 Hz & 5 kHz bell shaped; +/- 14 dB action. Expander Gate to eliminate backgound noise. Audio Compressor ,20 dB action. Iluminated switchs for EQ and Compressor-Expander Monitor & Hybrid Outputs +4dBu / 10K 1 Hybrid On-Air Receive + 4 dBu/10K 1 Hybrid send (MIX-Minus) +4 dBu / 10K Headroom Digital Control Bus to start external devices when open each channel fader. Out at minijack 1/8" // Ring = A channel (left side) Tip= B channel (Rigth side) Open collector OFF = Open Manages 0-24 V DC @ 100 mA Frequency response Noise EIN=-132 dBu/150 ohms LINE input ,S/N > 95 dBA at PGM output Dynamic Range Crosstalk L-R & R-L > 80 dBA @ 1khz Distortion From MIC to PGM out < 0.01 % THD @30-15.000 Hz Phase < 2º L&R @50-10.000 Hz Stereo tracking Phone Hybrid 2 for phone lines and one for cellular phone at 4 wires. Line attention with free hands operation ,and Line Transfer. Talkback Microphone with Audio Limiter. Noise Cancelled PZM type / Outputs to Phone Line Hybrid and Studio Speaker with AutoSwitch (AutoSwitch allows one-touch Studio communication) VU-meters DUAL type (RMS & Peak) for PGM & AUD. One Timer/Clock and one Timer /Clock Option a standard clock is activated ON-AIR Signal 3 amp Start external devices to start external devices when open each channel fader. Out at minijack 1/8" // Ring = A channel (left side) Tip= B channel (Rigth side) Open collector OFF= Open. Manages 0-24 VDC @ 100 mA. This allows to control Virtual Rack processors and start audio devices. Power with switch ,50/60 hz ,80 VA Dimensions & Weight BOX : 90 x 65 x 25 cm ,2 Kg 2600XD: 845mm wide ,635mm depth ,125 mm height – Weight 15 Kg BOX: 90 x 70 x 20 cm ,2 Kg |
Sonifex S2
In stock
Weight | 2 kg |
---|---|
features |
Assigning an Input Channel to an Output Bus – Switches at the top of the channel are used to select the output group routing ,to either Program ,Audition ,or both output busses. Selecting the PGM and/or AUD buttons routes the channel audio to the PGM and/or AUD mix busses. The buttons illuminate green to indicate the routing status. or Balance – The BAL/PAN control is used on mono channels to pan the mono input signal in the stereo image and on stereo channels to balance the stereo image. the selection is cancelled on release ,otherwise the button is alternate action. routing and timers ,etc. When unlit ,the channel is off. Flashing red indicates that the channel has been selected to ON but not routed to either PGM or AUD. Steady red indicates that the channel is ON and “armed” ,ready for the fader to be raised. Raising the fader changes the illumination to green indicating that the channel is live. Alternatively ,with the button unlit the fader may be raised and the channel can be operated simply by selecting ON. The illumination in this case toggles between unlit (channel OFF) and green (channel ON). every button on each channel can be set to a number of different modes to aid the use of the mixer and allow for extra functionality. Each button can be set to either operate manually ,be permanently on ,or permanently disabled. Also ,the ON button can be configured to operate in a number of modes ,altering remote start functions ,and the channel ON function can be controlled remotely by automation playout systems ,such as RCS® or VCS. |
specification |
Technical Specification For S2 Input/Output Impedances Mic Input: Mono Line Input: Stereo Line Input: PGM & AUD Output: Mono Output: Monitor Outputs: AES Input/Output: S/PDIF Input/Output: BNC Wordclock input: Input/Output Gain Range Mic Input: TRIM pot ±12dB Mono Line Input: TRIM pot ±12dB Stereo Line Input: TRIM pot ±12dB Telco Input: TRIM pot ±12dB Telco Output: Mix Minus Input: TRIM pot ±12dB Mix Minus Output: Digital Input: Digital Output: Frequency Response Mic Input: -1dB ,+0dB (-3dB at 130Hz with HPF in) Line Inputs: – 0.5dB ,+0dB RIAA Input: Noise (20Hz to 20kHz) Mic Input E.I.N.: Stereo Inputs (fader down ,no routing): Stereo Inputs (fader down ,one channel routed): Stereo Inputs (unity gain ,no routing): Stereo Inputs (unity gain ,one channel routed): Stereo Inputs (unity gain ,two channels routed): Distortion Total Harmonic Distortion: 0dB 0.025% at 10kHz ,0dB Crosstalk Inter-channel: Stereo: Equalisation LF Shelving at 100Hz: HF Shelving at 6.5kHz: Range Pan Range: Balance Range: Common Mode Rejection Ratio Mic Input: Digital I/O Sync Input Sample Rate: Output Sample Rates (Using Onboard Clock): 44.1kHz ,48kHz ,& 96kHz Output Sample Width: 20 ,24 bit (24 bit on V2 ODA/ODP) Output Headphone Output Load: 400Ω recommended Maximum Output (Analogue): Power Power (S2-PSU): switchable 115V ,230V ,fused ,210W max. Dimensions (S2-PSU): (Raw): Dimensions (S2-PSU): (Boxed): Weight (S2-PSU): Nett: 13.2lbs Gross: 17lbs Dimensions (S2-PSUS): (Raw): Dimensions (S2-PSUS): (Boxed): Weight (S2-PSUS): Nett: 3.5lbs Gross: 4.4lbs |
Ship Separately |
0 |
Product can be split into multiple boxes |
0 |
Mackie Onyx16
In stock
Weight | 15.9 kg |
---|---|
features |
<ul> including:</li> including aux sends ,groups and pre/post EQ assignment for all channels</li> bass ,etc.</li> |
Ship Separately |
0 |
Product can be split into multiple boxes |
0 |
D&R WEBSTATION-USB
In stock
Allen & Heath Qu-16
In stock
Weight | 13.5 kg |
---|---|
Ship Separately |
0 |
Product can be split into multiple boxes |
0 |
features |
16 Mono Inputs (TRS + XLR) Mono Mix 1-4 ,Stereo Mix 1-3) polarity ,HPF ,gate ,insert ,4-band PEQ ,compressor and delay on all Inputs 4-band PEQ ,1/3 octave GEQ ,compressor and delay on all Mix outputs |