Asistencia
Asistencia
¡Oferta!
The Henry Engineering MICROMIXER is a handy mixer to have when you need to mix 2 stereo sources together
The Henry Engineering MICROMIXER is a handy mixer to have when you need to mix 2 stereo sources together
¡Oferta!
The Henry Engineering MICROMIXER is a handy mixer to have when you need to mix 2 stereo sources together
The Henry Engineering MICROMIXER is a handy mixer to have when you need to mix 2 stereo sources together

Henry Engineering MICROMIXER

El Henry Engineering MICROMIXER is a handy mixer to have when you need to mix 2 stereo sources together, or for mixing stereo to mono.

Referencia: 124911 Categorías , , , Marca:Henry Engineering

$ 320.00 $ 343.00

Descargar el folleto en PDF

Henry Engineering MICROMIXER – FOUR-INPUT STEREO MIXER

MicroMixer is a handy mixer to have when you need to mix 2 stereo sources together, or for mixing stereo to mono.

Descripción del producto

MicroMixer is a 4-input, 2-output stereo mixer for line-level sources. MicroMixer is a perfect utility mixer with numerous uses: combining 2 stereo sources to a stereo output; combining up to 4 mono sources; mixing mono and stereo sources to a stereo output. Each balanced bridging input will accept a balanced or unbalanced source.

A level control for each input provides adjustment from OFF to +10dB of gain. “MicroAssign” switches permit any input signal to be routed to either the Left, Right, or both outputs. Audio inputs and outpus are on plug-in euroblock connectors.

MicroMixer is 1/3 rack width and can be mounted in an optional rack shelf, or wall mounted with optional wall/cabinet mounting brackets. MicroMixer is powered by an internal AC power supply.

Especificaciones técnicas

  • Input Levels-10 to +8 dBm
  • Impedancia de entrada20 000 ohmios (simétrico), 10 000 ohmios (asimétrico)
  • Nivel de salida+4 dBm nominal, +26 dBm max
  • Carga de salida600 ohmios o más por salida, simétrica
  • ControlesInput gain, Output assign
  • GananciaOFF to +10 dB
  • Respuesta en frecuenciaDC to 20kHz, 0.25 dB
  • Distorsión<0,011 TP3T IM/THD
  • Ruido>80 dB por debajo de la potencia nominal, típico
  • Requisitos de alimentación eléctrica115/230 V CA, 50/60 Hz, 3 W
  • ConstrucciónCarcasa de acero
  • Dimensiones físicas5.7″w X 1.7″h X 6.0″d, 3lbs
  • MontajeTable top, optional rack mount shelf, optional wall/cabinet mounting brackets
  • AprobaciónLaboratorio de Ensayos Eléctricos de la ciudad de Los Ángeles

Productos relacionados

Productos relacionados