Show sidebar
Show 10 15 20 25
-6%
The Sonifex RB-SL2 is a stereo, or twin independent mono, VCA limiter for use in news-rooms and other locations where the correct level into recording equipment.

Sonifex RB-SL2

In stock

Original price was: $ 571.17.Current price is: $ 536.90.
Add to Cart
Weight 1.45 kg
Dimensions 21 × 36 × 6 cm
Sale
The Sonifex RB-DA6R is a 1U rack-mount high performance 6-way stereo distribution amplifier for splitting a source into a number of different outputs.

Sonifex RB-DA6R

In stock

Original price was: $ 685.40.Current price is: $ 645.42.
Select options
Weight 1.9 kg
Dimensions 23 × 49 × 7 cm
-6%
The Sonifex CM-TBU line-powered telephone balance unit is compatible with all analogue direct exchange lines and provides a 4-wire communications system to interface with the telephone network.

Sonifex CM-TBU

In stock

Original price was: $ 576.88.Current price is: $ 542.61.
Add to Cart
Weight 1 kg
Dimensions 13 × 23 × 8 cm
-5%
The Sonifex RB-MM1 is a unit for generating a suitable mix to send to a telephone hybrid or codec.

Sonifex RB-MM1

In stock

Original price was: $ 582.59.Current price is: $ 554.03.
Add to Cart
Weight 1.5 kg
Dimensions 36 × 21 × 6 cm
Product can be split into multiple boxes

0
Ship Separately

0
specification

Technical Specification For RB-MM1

Audio Specification

Maximum Input Level:
+28dBu

Input Impedance:
>20kΩ

Maximum Output Level:
+28dBu

Output Impedance:
<50Ω

Output Gain Range:
Adjustable -15dB to +12dB

,

ref 0dBu gain via a multi-turn pot

Common Mode Rejection:
>60dB

Band Pass Filter Range:
200Hz to 4kHz

,

12dB/octave

LF Null Adjustment:
Better than 40dB at 100Hz

Mix-Minus Null:
Better than 40dB at 1kHz

Frequency Response:
20Hz – 22kHz ± 0.1dB

Distortion:
0.01% THD @ 1kHz

,

ref +8dBu output (C-Message weighted)

Noise:
-90dBu unity gain +6dBu

Connections

Analogue Inputs From Mixer Output:
2 x XLR 3 pin female (balanced) (L & R)

Analogue Input From Telephone Fader:
1 x XLR 3 pin female (balanced) (L & R)

Analogue Output To TBU:
1 x XLR 3 pin male (balanced) (L & R)

Mains Input:
Filtered IEC

,

switchable 110-120V

,

or 220-240V

,

fused

,

6W max.

Fuse Rating:
Anti-surge fuse 100mA 20 x 5mm (230VAC)

Anti-surge fuse 250mA 20 x 5mm (115VAC)

Equipment Type

RB-MM1:
Mix-minus generator

Physical Specification

Dimensions (Raw):
28cm (W) x 10.8cm (D) x 4.3cm (H)

11” (W) x 4.3” (D) x 1.7” (H)

Dimensions (Boxed):
36cm (W) x 20.5cm (D) x 6cm (H)

14.2” (W) x 8” (D) x 2.4” (H)

Weight:
Nett: 1.1kg Gross: 1.5kg

Nett: 2.4lbs Gross: 3.3lbs
-5%
The Sonifex RB-MA2 consists of two independent low-noise microphone pre-amplifiers for converting mic level signals to line level, or for driving long lines from microphones to processing equipment.

Sonifex RB-MA2

In stock

Original price was: $ 582.59.Current price is: $ 554.03.
Add to Cart
Weight 1.35 kg
Dimensions 21 × 36 × 6 cm
-6%
The Sonifex AVN-DIO04 is a Dante to analogue phono stereo input & output convertor in the Sonifex DIO range of Dante input/output devices.

Sonifex AVN-DIO04

In stock

Original price was: $ 622.57.Current price is: $ 588.30.
Add to Cart
Weight 0.3 kg
Dimensions 10 × 8 × 5 cm
-6%
The Sonifex AVN-DIO05 is a Dante to analogue terminal block input and output convertor in the Sonifex DIO range of Dante input/output devices.

Sonifex AVN-DIO05

In stock

Original price was: $ 622.57.Current price is: $ 588.30.
Add to Cart
Weight 0.3 kg
Dimensions 10 × 8 × 5 cm
-5%
The Sonifex AVN-DIO09 is a Microphone input to Dante converter in the Sonifex DIO range of Dante input/output devices with A/D circuitry offering a world-class E.I.N. of 129dB.

Sonifex AVN-DIO09

In stock

Original price was: $ 628.28.Current price is: $ 594.01.
Add to Cart
Weight 0.3 kg
Dimensions 10 × 8 × 5 cm
-6%
The Sonifex RB-LI2 stereo line isolation unit is used to isolate audio signals from inter-area ground hum loops, which could be caused by equipment being powered by different mains power supplies, or different phases on the same supply.

Sonifex RB-LI2

In stock

Original price was: $ 651.13.Current price is: $ 611.15.
Add to Cart
Weight 1.5 kg
Dimensions 21 × 36 × 6 cm
-5%
The Sonifex AVN-GPIO converts GPIO to network commands in order to control and be controlled by other equipment or software across a standard network.

Sonifex AVN-GPIO

In stock

Original price was: $ 651.13.Current price is: $ 616.86.
Add to Cart
-6%
The Sonifex RB-DA6 is a 1U rack-mount high performance 6-way stereo distribution amplifier for splitting a source into a number of different outputs.

Sonifex RB-DA6

In stock

Original price was: $ 685.40.Current price is: $ 645.42.
Add to Cart
Weight 1.9 kg
Dimensions 58.5 × 22.5 × 7 cm
Product can be split into multiple boxes

0
Ship Separately

0
specification

Technical Specification For RB-DA6

Audio Specification

Maximum Input Level:
+28dBu

Maximum Output Level:
+28dBu

Frequency Response:
20Hz to 20kHz ±0.1dB (600Ω load

,

ref 1kHz)

Gain Range:
Adjustable 8dB loss to 18dB gain (L & R adjust)

Common Mode Rejection:
>66dB typically

Input impedance:
>20kΩ bridging

Output impedance:
<50Ω

Distortion:
0.01% THD @ 1kHz

,

ref +8dBu output

Noise:
-100dB unity gain

,

ref +8dBu output

 
 

Connections

Inputs:
2 x XLR 3 pin female (balanced

,

can be unbalanced)

Outputs:
12 x XLR 3 pin male (balanced

,

can be unbalanced)

Mains Input:
Filtered IEC

,

switchable 110-120V

,

or 220-240V

,

fused

,

6W max

Fuse Rating:
Anti-surge fuse 100mA 20 x 5mm (230VAC)
Anti-surge fuse 250mA 20 x 5mm (115VAC)

 
 

Equipment Type

RB-DA6:
6 way stereo distribution amplifier

 
 

Physical Specification

Dimensions (Raw):
48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
19” (W) x 4.3” (D) x 1.7” (H) (1U)

Dimensions (Boxed):
58.5cm (W) x 22.5cm (D) x 7cm (H)
23” (W) x 8.9” (D) x 2.8” (H)

Weight:
Nett: 1.3kg  Gross: 1.9kg
Nett: 2.9lbs Gross: 4.2lbs
-6%
The Sonifex RB-LC3 is a triple output switching unit for controlling external mains indicators, primarily studio status lights for broadcasting applications.

Sonifex RB-LC3

In stock

Original price was: $ 685.40.Current price is: $ 645.42.
Add to Cart
Weight 1.45 kg
Dimensions 36 × 21 × 6 cm
Product can be split into multiple boxes

0
Ship Separately

0
specification

Technical Specification For RB-LC3

Connections

Mains Input:
Non-filtered IEC

,

110V-240V auto- adjusting

,

fused

,

6W maximum

Mains Outputs:
3 x Non-filtered IEC plugs

,

1A fused

Fuse Rating (Mains Outputs):
3 x Anti-surge fuse 1A 20 x 5mm

Telephone:
2 x RJ11-4 sockets

Control Inputs & Outputs:
15 way D-type plug Inputs: 0V- 5V DC

Outputs: Open collector 20mA sink capability

Equipment Type

RB-LC3:
3 way light/power controller

Physical Specification

Dimensions (Raw):
28cm (W) x 10.8cm (D) x 4.2cm (H) (1U)

11” (W) x 4.3” (D) x 1.7” (H) (1U)

Dimensions (Boxed):
36cm (W) x 20.5cm (D) x 6cm (H)

14.2” (W) x 8” (D) x 2.4” (H)

Weight:
Nett: 1.00kg Gross: 1.45kg

Nett: 2.2lbs Gross: 3.2lbs
-5%
The Sonifex RB-UL4 is a 1U rack-mount quad stereo unit for interfacing domestic or semi-professional unbalanced equipment to professional balanced line levels.

Sonifex RB-UL4

In stock

Original price was: $ 691.11.Current price is: $ 656.84.
Add to Cart
Weight 1.9 kg
Dimensions 23 × 59 × 7 cm
-5%

Sonifex RB-LU4

In stock

Original price was: $ 691.11.Current price is: $ 656.84.
Add to Cart
Weight 1.9 kg
Dimensions 23 × 59 × 7 cm
-5%
The Sonifex RB-BL4 is a dual bidirectional stereo unit for interfacing domestic or semi-pro unbalanced equipment to professional balanced line levels, and vice versa.

Sonifex RB-BL4

In stock

Original price was: $ 691.11.Current price is: $ 656.84.
Add to Cart
Weight 1.9 kg
Dimensions 23 × 59 × 7 cm