10 Way Stereo Analogue Source Selector/Mixer
The Sonifex RB-SS10 10 way stereo analogue source selector/mixer is a 1U rack-mount unit that produces a stereo analogue audio output from 10 selectable stereo analogue sources. There are 10 illuminated front panel push-buttons, which select and indicate the current channel selection. The selection and indication is also available through a remote connector on the rear panel. To stop accidental front panel selection there is a remote input to inhibit the front panel buttons.
Two of the stereo inputs are on XLR so that you can hot-plug audio sources, e.g. portable recorders. As well as being able to act as a source select module, the RB-SS10 can act as a mixer, by enabling the mix mode (using the remote input).
The gain for left and right inputs can be individually adjusted by using the pre-set potentiometers on the front panel. As well as routing the selected audio signal, the unit will also route a remote signal input through the remote connector to the selected input source, for starting external audio equipment such as a CD player.
The front panel headphone output has its own volume control, which is independent of the level adjustment for the main outputs, and has a maximum output level of +12dBu. The volume control can be made to also alter the output level of the main XLR outputs by using a switch on the rear panel to enable/disable this feature.
There is a designation strip on the front panel, useful for giving the buttons a meaningful description. The strip covers the input gain controls so that once configured, they can’t easily be altered – ideal for installation work. The LED on the front panel is used to indicate that power is present on the unit.
|Input Impedance:||20kΩ bridging|
|Max Input Level:||+28dBu|
|Max Output Level:||+28dBu|
|Frequency Response:||20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)|
|Input Gain Range:||Adjustable 8dB loss to 20dB gain (L & R adjust) via front panel adjustable preset potentiometers|
|Common Mode Rejection:||>66dB typically|
|Noise:||-96dB unity gain ref +8dBu|
|Max Headphone Output Level:||+12dBu|
|Inputs:||4 x XLR 3 pin female (2 x stereo) (balanced, can be unbalanced) 2 x 25 way D-type socket (female) (4 stereo balanced channels on each)|
|Outputs:||2 x XLR 3 pin male (stereo balanced, can be unbalanced)|
|Remote Start I/O:||25 way D-type plug (male)|
|Remote Select/Switch Inputs:||25 way D-type socket (female)|
|Status Outputs:||25 way D-type socket (female)|
|Mains Input:||Filtered IEC, 110V-120V, or 220-240V switchable, fused, 6W maximum|
|Fuse Rating:||Anti-surge fuse 160mA 20 x 5mm (230VAC) Anti-surge fuse 315mA 20 x 5mm (115VAC)|
|RB-SS10:||10 way stereo analogue source selector/mixer|
|Dimensions (Raw):||48cm (W) x 10.8cm (D) x 4.2cm (H) (1U) 19” (W) x 4.3” (D) x 1.7” (H) (1U)|
|Dimensions (Boxed):||58.5cm (W) x 22.5cm (D) x 7cm (H) 23” (W) x 8.9” (D) x 2.8” (H)|
|Weight:||Nett: 1.5kg Gross: 2.0kg Nett: 3.3lbs Gross: 4.4lbs|
BW Price Guarantee
(Subject to conditions)