RigExpert Stick 230
Antenna Analyzer
Sale!
RigExpert Stick 230
Small. Handy. Powerful.
The analyzer is designed for measuring SWR (standing wave ratio), return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.
It is the world’s first antenna analyzer capable of 16 hours of continuous measurements without battery recharging.
Small, handy and powerful vector network analyzer is designed for measuring most useful parameters of cable and antenna systems in the range of 100 kHz to 230 MHz. Compared with the other devices, the Stick is the State-of-the-Art Antenna & Cable Analyzer. Because it has Key benefits: less size you obtain, less weight you carry, less time you measure.
- Rapid check-out of an antenna in the field or stationary conditions.
- Tuning an antenna to resonance.
- Comparing characteristics of an antenna before and after a specific event (rain, hurricane, etc.).
- Measuring capacitance or inductance of reactive loads.
Frequency range: 0.1 to 230 MHz Frequency entry: 1 kHz resolution Measurement for 25, 50, 75, 100, 150, 200, 300, 450, and 600-Ohm systems SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes R and X range: 0…10000, -10000…10000 Display modes:
- SWR, return loss, R, X, Z, L, C, Magnitude and Phase Angle at single frequency.
- SWR chart, 100 points.
- SWR chart at fixed HAM bands by IARU Regions, 100 points.
- Multimode – to check your multiband antenna promptly.
- Connector type: UHF (SO-239).
- Output signal shape: square, 0.1 to 230 MHz.
- Output power: -10 dBm (at 50 Ohm load).
- One 3.7V Li-Ion battery, type 18650
- When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
- 200×200 monochrome e-paper display
- 2×3 keys on the waterproof keypad
- English menus and help screens
- USB connection to a personal computer
BW Price Guarantee
(Subject to conditions)
Tech Support
2-Year Warranty
$382.00
