
The Glensound GS-HA014 is a useful headphone amp for studio environments.
This stereo amp mounts underneath desks and allows easy headphone connections for presenters or guest users. Â A 6.35mm and 3.5mm jack socket is available for the headphones and a full size, covered pot allows level adjust. Â Audio inputs are on 2 x balanced 6.35mm jack sockets.
The units link power via CAT5. Â Up to 8 units can be connected from 1 external 9V DC supply. Â Via an internal jumper, audio can also be routed via the same CAT5 connections as the power. Â The external power supply is not included and at least 1 must be purchased separately.
The GS-HA014 is available with 2 different line up input levels, when ordering please either specify ‘pro’ where the input line up is 0 dBu (i.e. the output of a broadcast desk) or ‘pc’ where the input line up is -10 dBu (often used from the output of computers for editing purposes).
- Stereo headphone amp
- 6.35 and 3.5mm headphone jacks
- Volume Control
- Audio inputs on balanced 6.35mm jack sockets
- Under desk mounting
- Power loop via CAT5
- Selectable audio loop via same CAT5
- 9V DC power
Headphone impedance: | 32 to 1000 Ohms |
Maximum output level: | +20dB |
Headphone jacks: | 1 x 6.35mm (1/4") and 1 x 3.5mm stereo 3 pole sockets |
6.35mm Jack type: | accepts both A and B gauge plugs |
Front panel level pot range: | -20 to + 10dB standard (-70 to + 10dB special order) |
Maximum input level: | +20dB |
Frequency Response: | >-2dB 40Hz to 20kHz |
Distortion: | <0.02% @ 100Hz, 1kHz, 10kHz |
Noise: | < -73dB @ line up (22Hz to 22kHz) |
Output Impedance: | 180 Ohms |
Input impedance: | >80k |
Input connectors: | 2 x 6.35mm (1/4") balanced 3 pole sockets |
Input line up 'pro': | 0 dBu |
Input line up 'pc': | -10dBu |
DC input: | 7 - 12 Volts |
DC connector: | 2.5mm centre 5.5mm outside |
Max current consumption: | 1 watt |
Dimensions: | 86.61mm wide |
32.23mm high | |
104.31mm deep | |
Weight: | 220g |
BW Price Guarantee
(Subject to conditions)
Tech Support

2-Year Warranty
