800W (RMS) Single Channel Television Transmitter

The TEM Dual-Cast XL-VISION allows selection of transmission modes remotely using or SNMP commands or TCP/IP using the Web graphic interface.


SKU: 102095



The TEM Dual-Cast XL-VISION Series represents the state of the art of the worldwide TV transmitter technology. In a compact solution 3+1 Unit Rack, it covers a power range up to 2000W RMS / 2500W p.s. and supports DVB-T/H / T2, ISDB-T/Tb, DAB/DAB +/T-DMB, ATSC, PAL and NTSC modulations. Of course, Dual Cast analog and digital configuration is
also supported.

XL-VISION is composed by 1 or 2 S-VISION exciter/s (1RU) and an RF amplifier A-VISION (3RU); it can be a medium/high power transmitter, a regenerative transmitter or even a transposer. It can be equipped and configured with different input interfaces (Audio/Video, Satellite Receiver, ASI, Gigabit Ethernet or RF).

A-VISION Amplifier embeds a built-in ASI and RF matrix in order to connect 2 S-VISION exciters and ensure a maximum level of redundancy.

XL-VISION allows selection of transmission modes remotely using or SNMP commands or TCP/IP using the Web graphic interface. Functional interfaces are available for total remote control of the apparatus by means of serial protocols or TCP/IP ports.

Thanks to the internal Web server, the apparatus can be easily monitored and configured and updated using a LAN connection and a standard Web browser. Moreover, the built-in SNMP agent allows full automated remote control.


  • Compact 3+1 19″ Rack chassis
  • Output Power up to 1200W RMS in digital or up to 2500W p.s. in analogue
  • High efficiency broadband amplifier technology
  • DVB-T/H/T2, ISDB-T/Tb, DTMB, DAB/DAB+/T-DMB, ATSC, PAL, NTSC modulations fully supported
  • Embedded Re-Multiplexer/Layer Combiner/TS to BTS (188 to 204 byte) converter for ISDBTb
  • Adaptive pre-correction circuits
  • Powerful echo canceller when S-Vision is used as an on-channel repeater
  • Optional high-performance additional echo cancellation circuit
  • On-board high stability GPS / GLONASS receiver with battery
  • Flexible input interfaces:
    · 4 x ASI inputs (TS, BTS, T2MI, SMPTE-310M) + Analog input
    · 2 x ASI inputs and 2 x Gigabit Ethernet
    · 1 x DVB-S/S2 Satellite Receiver input
    · 1 x RF input
  • SNMP, Web Interface (HTML 5)


  • UHF digital output power: 800W to 1500W RMS @ MER 38 dB typ. (DVB, ISDB) 1200W to 2000W rms (ATSC)
  • UHF analog output power: up to 2500 W p.s.
  • VHF digital output power: 900W to 1300W RMS @ MER 37dB typ. (DVB, ISDB) 1300W to 1600W RMS (ATSC)
  • VHF analog output power: 2300W or 2500W p.s.
  • Configuration: single or dual driver
  • Frequency Agility: UHF Band IV and V or VHF Band III
  • Frequency resolution: 1Hz
  • Pre-correction: Adaptive
  • Exciter: S-VISION Series
  • RF connector: 7/16 (f), 50 Ohm (A-VISION 800) / 7/8 (f), 50 Ohm (A-VISION 1200C and 1500C)