Sonifex RB-LI2 Original price was: €515.Current price is: €490.
Back to products
Sonifex RB-MA1 Original price was: €430.Current price is: €405.

Sonifex RB-PLI6

6 Way Mono Passive Line Isolation Unit

The Sonifex RB-PLI6 passive line isolation unit is used to isolate audio signals from inter-area ground hum loops, which could be caused by equipment being powered by different mains power supplies or phases on the same supply.

Original price was: €685.Current price is: €640.

SKU: 105634

Description

Sonifex RB-PLI6

6 Way Mono Passive Line Isolation Unit

Broadcasters Warehouse -The RB-PLI6 passive line isolation unit is used to isolate audio signals from inter-area ground hum loops, which could be caused by equipment being powered by different mains power supplies or phases on the same supply. The input and output are connected together through a transformer, and the unit has internal jumpers allowing the inputs and/or outputs to be balanced about ground. The unit requires no mains power for operation.

This unit is useful where audio is required to be driven over a relatively long length of cable. By isolating the signal using transformers, ground loop currents, which can be present in non-isolated signals, are eradicated completely.

RB-PLI6 Diagram

RB-PLI6 Block Diagram.

Technical Specification For RB-PLI6

Audio Specification

Output Impedance: <150 Ω
Distortion: 0.5% THD @ 40Hz, ref +17dBu output
Common Mode Rejection: >64dB typically
Frequency Response: 10Hz to 36kHz ±0.5dB

Connections

Inputs: 6 x XLR 3 pin female (Balanced)
Outputs: 6 x XLR 3 pin male (Balanced)

Equipment Type

RB-PLI6: 6-way mono passive line isolation unit

Physical Specification

Dimensions (Raw): 48 cm (W) x 10.8 cm (D) x 4.2 cm (H) (1U)
19” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed): 58.5 cm (W) x 22.5 cm (D) x 7 cm (H)
23” (W) x 8.9” (D) x 2.8” (H)
Weight: Nett: 1.5 kg Gross: 1.9 kg
Nett: 3.3lbs Gross: 4.2lbs