The Sonifex RB-BL2 is a bidirectional stereo unit for interfacing domestic or semi-pro unbalanced equipment to professional balanced line levels, and vice versa.
Sonifex RB-BL2 Original price was: $491.00.Current price is: $469.00.
Back to products
The Sonifex RB-PA2 is a dual stereo RIAA equalised phono amplifier. This record player preamp amplifies the small signal from your pick up cartridge.
Sonifex RB-PA2 Original price was: $513.00.Current price is: $485.00.

Sonifex RB-BL4

The Sonifex RB-BL4 is a dual bidirectional stereo unit for interfacing domestic or semi-pro unbalanced equipment to professional balanced line levels, and vice versa.

Original price was: $667.00.Current price is: $634.00.

SKU: 105617 Brand:Sonifex

Description

The Sonifex RB-BL4 is a dual bidirectional stereo unit for interfacing domestic or semi-pro unbalanced equipment to professional balanced line levels, and vice versa.

The four XLR-3 electronically balanced inputs have an impedance of 20 kΩ bridging and are routed to four unbalanced RCA (phono) outputs with an output impedance of <50 Ω.

The four RCA unbalanced inputs have an impedance of 20 kΩ and are routed to four balanced XLR-3 outputs with an output impedance of <50 Ω. All connections are on the rear panel.

The output gain can be adjusted for left and right channels by using pre-set potentiometers accessible through the rear panel.

RB-BL4 Diagram

RB-BL4 Block Diagram.

Technical Specification For RB-BL4

Audio Specification

Maximum Input Level:+28dBu
Maximum Output Level:+28dBu
Input Impedance (RCA):>10kΩ unbalanced
Input Impedance (XLR):>20kΩ balanced bridging
Output Impedance (RCA):<50 Ω
Output Impedance (XLR):<50 Ω
Distortion:0.01% THD @ 1kHz, ref +8dBu output
Noise:-100dB, unity gain, ref +8dBu output
Common Mode Rejection:>66dB typically
Frequency Response:20Hz to 20kHz ±0.1dB (600 Ω load, ref 1kHz)
Gain Range:Unbalanced Output : -28dBu to 0dBu, ref 0dBu into balanced XLR input
Balanced Output : -15dBu to +15dBu, ref -15dBu into unbalanced RCA input

Connections

Inputs:4 x RCA phono (Unbal), 4 x XLR 3 pin female (Bal)
Outputs:4 x XLR 3 pin male (Bal), 4 x RCA phono (Unbal)
Mains Input:Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max
Fuse Rating:Anti-surge fuse 100mA 20 × 5 mm (230VAC)
Anti-surge fuse 250mA 20 × 5 mm (115VAC)

Equipment Type

RB-BL4:Dual stereo bidirectional matching converter

Physical Specification

Dimensions (Raw):48 cm (W) x 10.8 cm (D) x 4.2 cm (H) (1U)
19” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed):58.5 cm (W) x 22.5 cm (D) x 7 cm (H)
23” (W) x 8.9” (D) x 2.8” (H)
Weight:Nett: 1.3 kg Gross: 1.9 kg
Nett: 2.9lbs Gross: 4.2lbs

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In