Sine Control Powerclamp Series 2

Surge Suppressor

The Sine Control Powerclamp Series 2 senses the fast ramp of the transient and automatically fixes on the peak of the line voltage waveform.

SKU: 101090


POWERCLAMP is a sophisticated surge suppression unit that provides the ultimate in transient protection with much lower clamping levels than any other TVSS device.

The Sine Control Powerclamp Series 2 wire-in PARALLEL TVSS devices are ideally suited for hospitals, airports, data centers, military installations, manufacturing plants and similar mission-critical facilities that have low exposure to lightning. They are rated at 40,000 surge amps per phase and will prevent power line spikes from damaging computers and other sensitive equipment. Their superior surge suppression will greatly improve system reliability and prevent the failures that are caused by power line disturbances. Operation is not affected by the power requirements of the load. Each line phase is fused, with a fuse status LED. An unlikely failure will not interrupt power to the load. POWERCLAMP Series 2 units should be installed at branch or sub-panels with upstream (main panel) protection.