Heil Sound HB-1
Mic Boom
The HB-1 is an articulated arm which is of very substantial steel channel structure and balanced by four external springs.
€52.00
Description
To answer the many requests for an economy microphone boom, we present the Heil HB-1.
The HB-1 is an articulated arm which is of very substantial steel channel structure and balanced by four external springs. Capable of supporting microphones up to 2.5 lbs, the HB-1 has a reach of 40″.
The HB-1 is shipped with a brass lined ‘C’ clamp mount that accept up to a 1.5″ thick table. The HB-1 will fit all of the brass lined Heil mounting accessories:
DT-1 Flush Mount that mounts through a 1.5″ hole in the desk top
FL-2 Flange Mount secures to any flat surface
WM-1 Wall Mount
RS-1 12″ Riser Mount
The HB-1 Boom accepts all of the standard 5/8″ -27 threaded microphone hardware.
The threaded chrome stem can be secured into it’s needed position by tightening the thumb screw.
Heil Sound, Ltd. warrants all accessories to the original purchaser for a period of one year (parts) and ninety days (labor) from the date of purchase.
Related Products
audio-technica AT8033
In stock
| Weight | 0.5 kg |
|---|---|
| specification |
Element: Fixed-charge back plate ,permanently polarized condenserPolar Pattern: CardioidFrequency Response: 30-20 ,000 HzLow Frequency Roll Off: 80 Hz ,12 dB/octaveOpen Circuit Sensitivity: Phantom: -44 dB (6.3 mV) re 1V at 1 Pa 1 kHz at 1% T.H.D. 1 kHz at 1% T.H.D.Dynamic Range: Phantom: 113 dB ,1 kHz at Max SPL 1 kHz at Max SPLSignal to Noise Ratio: 70 dB ,1 kHz at 1 PaPhantom Power Requiremens: 11-52V DC ,2 mA typicalBattery Type: 1.5V AA/UM3Battery Current Life: 0.4 mA / 1200 hours typical roll-offWeight: 159 g (5.6 oz)Dimensions: 194.2 mm (7.65") long ,26.0 mm (1.02") head diameterOutput Connector: Integral 3-pin XLRM-typeAccessories: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8136 windscreen; battery; soft protective pouch |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
AKG C3000
In stock
| Weight | 2 kg |
|---|---|
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Key Specifications: Polar Pattern Audio Frequency Bandwidth Sensitivity Max SPL Equivalent Noise Level Signal to Noise Preattuation Pad Bass Cut Filter 6dB/octave Electrical Impedance Recommended Load Impedance Powering Interface 2mA Audio Output Male 3-pin Finish Dimensions Net Weight |
RØDE Procaster
In stock
| Weight | 1.1 kg |
|---|---|
| Dimensions | 35 × 15 × 10 cm |
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Procaster Specifications: Acoustic Principle Address Type Frequency Range Output Impedance Sensitivity Weight Dimensions |
audio-technica AT2050
In stock
| Weight | 1 kg |
|---|---|
| specification |
Element: Externally-polarized (DC bias) condenserFrequency Response: 20-20 ,000 HzLow Frequency Roll Off: 80 Hz ,12 dB/octaveOpen Circuit Sensitivity: 42 dB (7.9 mV) re 1V at 1 PaImpedance: 120 ohmsMaximum Input Sound Level: 149 dB SPL ,1 kHz at 1% T.H.D.; with 10 dB pad (nominal)Dynamic Range: 132 dB ,1 kHz at Max SPLSignal to Noise Ratio: 77 dB ,1 kHz at 1 PaPhantom Power Requirements: 11-52V DC ,4.7 mA typicalWeight: 412 g (14.5 oz)Dimensions: 170.0 mm (6.69") long ,52.0 mm (2.05") maximum body diameterAccessories: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
Electro-Voice RE92L
In stock
| Weight | 0.16 kg |
|---|---|
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Broadcast Microphones Case Material Connector Type Current Consumption Diameter (Max) Element Finish Frequency Response 000 Hz Impedance ,Low-Z balanced Maximum SPL (1% THD) Mic Type Open Circuit Voltage Polar Pattern Power Requirement Specials Wired/Wireless Height Weight Net |
| features |
Wide ,smooth frequency response |
Audio-Technica AT4040
In stock
| Weight | 1 kg |
|---|---|
| specification |
Element: Externally-polarized (DC bias) condenserPolar Pattern: CardioidFrequency Response: 20-20 ,000 HzLow Frequency Roll Off: 80 Hz ,12 dB/octaveOpen Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 PaImpedance: 100 ohmsMaximum Input Sound Level: 145 dB SPL ,1 kHz at 1% T.H.D.; with 10 dB pad (nominal)Dynamic Range: 133 dB ,1 kHz at Max SPLSignal to Noise Ratio: 82 dB ,1 kHz at 1 PaPhantom Power Requirements: 48V DC ,4.2 mA typicalWeight: 12.7 oz (360 g)Dimensions: 6.69" (170.0 mm) long ,2.10" (53.4 mm) maximum body diameterOutput Connector: Integral 3-pin XLRM-typeAccessories: AT8449 shock mount for 5/8"-27 threaded stands; protective carrying case |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
Reviews
There are no reviews yet