AudioScience Iyo-Dante 16.0MR is a 16-input Dante interface with StudioHub RJ45 mic/line connections, 32-bit A/D conversion, individual phantom power, isolated GPIO and AES67 interoperability.
$ 2,737.00
AudioScience Iyo-Dante 16.0MR – 16-Input RJ45 Interface converts sixteen balanced microphone or line-level sources into Dante network audio. StudioHub-format RJ45 audio connections and isolated GPIO support integration with compatible broadcast and installed-audio equipment. This input-only interface occupies 1U in a standard 19-inch rack and has no analogue outputs.
The analogue RJ45 sockets follow the StudioHub pinout and are separate from the dedicated Ethernet ports. Inputs accommodate levels from −60 to +24 dBu in 1 dBu steps, with a 10-kilohm input impedance. The interface uses 32-bit oversampling A/D conversion, with published sample rates of 44.1, 48 and 96 kHz.
AudioScience Iyo-Dante 16.0MR provides individually switchable 48 V phantom power for compatible microphones. The maximum is 10 mA per channel, subject to an 80 mA total across sixteen inputs. Phantom power requires input gain above 24 dB. Check microphone current requirements and gain settings before deployment.
Each physical input becomes a Dante transmit channel available for routing through Dante Controller. The embedded web interface provides gain adjustment, phantom-power switching, input muting, metering and GPIO control. Two DB15 ports each provide five opto-isolated inputs and five relay-isolated outputs. Front-panel RGB LEDs display channel levels and streaming status.
Two dedicated Ethernet ports support redundant Dante connections or switched operation. AES67 mode supports compatible network integrations. The internal universal supply accepts 90–260 V AC at 47–63 Hz. An optional external 12 V DC supply provides an independent power path. AC and DC may operate separately or together for failover redundancy.