WE SHIP WORLDWIDE

Audio-Technica AT2050 – Multi-Pattern Condenser Microphone with XLR Output

Audio-Technica AT2050 is a multi-pattern XLR condenser microphone with three selectable pickup patterns, an 80Hz high-pass filter, 10dB pad and included shock mount.

Audio-Technica AT2050 – Multi-Pattern Condenser Microphone with XLR Output combines three selectable pickup patterns with practical onboard controls for studio recording and live performance. Its large-diaphragm, externally polarised condenser design provides a 20 Hz–20 kHz frequency response. A balanced three-pin XLR output connects to compatible microphone preamps, mixers and audio interfaces, with 11–52 V DC phantom power required for operation.

Three Selectable Pickup Patterns

Choose cardioid, omnidirectional or figure-of-eight operation to suit the recording arrangement. Cardioid focuses pickup towards the front, omnidirectional captures sound around the microphone, and figure-of-eight receives sound from the front and rear while reducing pickup from the sides. This flexibility supports different source placements and room-capture requirements without changing microphones. The Audio-Technica AT2050 is side-address, so position sources relative to the capsule’s sides rather than aiming at its top.

Switchable Filter and Pad

Audio-Technica AT2050 includes an 80 Hz high-pass filter with a 12 dB-per-octave slope, allowing low-frequency reduction when required. The switchable 10 dB pad increases the published maximum input level from 149 dB SPL to 159 dB SPL. The unpadded maximum is specified at 1 kHz and 1% total harmonic distortion. Typical dynamic range is 132 dB, with 17 dB SPL A-weighted equivalent noise.

Included Shock Mount and XLR Connectivity

The supplied AT8458 shock mount helps isolate the microphone from mechanically transmitted vibration and fits 5/8-inch-27 threaded stands. A 3/8-inch-16 thread adapter and soft protective pouch are also included. The low-impedance, balanced XLR output requires a suitable external recording input; this model does not connect directly to a computer over USB.

Basic Specifications

  • Factory model / MPN: AT2050.
  • Element: externally polarised condenser.
  • Patterns: cardioid, omnidirectional and figure-of-eight.
  • Frequency response: 20 Hz–20 kHz.
  • Sensitivity: −42 dB re 1 V/Pa, 7.9 mV/Pa.
  • Output impedance: 120 Ω.
  • Maximum SPL: 149 dB; 159 dB with pad.
  • High-pass filter: 80 Hz, 12 dB/octave.
  • Pad: −10 dB, nominal.
  • Power: 11–52 V DC phantom, 4.7 mA typical.
  • Output: three-pin male XLR.
  • Dimensions: 170 mm long × 52 mm maximum diameter.
  • Microphone weight: 412 g.
[prm_product_reviews]