|
Specifications
Audio Inputs
2 (two) stereo inputs each module;
One balanced stereo line (or mono Mic in 2610 & 2612); and one unbalanced AUX.
Option USB 2602
,
2 stereo Digital inputs & 2 stereo Digital outputs by USB
Inputs Level/Impedance
Balanced MIC= -25 dBu/-80 dBu; 150/250 Ohms
Balanced LINE = -20 dBu/+22 dBu; 600~ 10Kohms
Unbalanced AUX = -20 dBu/+15dBu; 600~ 10Kohms
Inserts for both MIC inputs in microphone modules.
Stereo insert for LINE A in LINE modules.
Phantom 48v
Standard phantom 48V power supply for up to 10 microphones.
Outputs
3 bus outputs; PGM & AUD balanced + 4 dBm;
AUX Unbalanced + 4 dBm
Balanced Outs; Max Level +26dBu (10K)
,
+20dBm (600ohms)
Unbalanced Outs; Max Level = +20dBm/600 ohms
Optional Digital AES/EBU output for PGM & AUD.
Digital Levels
AES-3/SPDIF outputs TCP/IP & USB inputs & outputs; 0VU RMS is set at -15dB Ref Full Scale level. 0dB Peak is set to 100% Full Digtal Scale
Monitor & Hybrid Outputs
1 Separate Hybrid CUE
,
+4dBu / 10K
1 Hybrid On-Air Receive + 4 dBu/10K
1 Hybrid send (MIX-Minus) +4 dBu / 10K
CUE Monitor
Internal Monitor Amplifiers: 3W CUE monitor with internal speaker. 2 Stereo Monitor outputs; Control Room & Studio
,
with Muting Relays (line level).
Microphone Processor
Optional MIC module model 2612
,
160mm wide
,
with 3 MIC with processing facilities. 4 band EQ
,
80 Hz and 10 kHz shelving
,
160 Hz & 5 kHz bell shaped; +/- 14 dB action. Expander Gate to eliminate backgound noise. Audio Compressor
,
20 dB action. Iluminated switchs for EQ and Compressor-Expander
Monitor & Hybrid Outputs
1 Separate Hybrid CUE
,
+4dBu / 10K
1 Hybrid On-Air Receive + 4 dBu/10K
1 Hybrid send (MIX-Minus) +4 dBu / 10K
Headroom
22 dB @ LIN to PGM Ref + 4dBu/10 k
Digital Control Bus
One Start Devices output for each input module
,
to start external devices when open each channel fader. Out at minijack 1/8" // Ring = A channel (left side) Tip= B channel (Rigth side) Open collector OFF = Open Manages 0-24 V DC @ 100 mA
Frequency response
20-20.000 Hz +/- 0.25 dB (LIN or MIC to PGM)
Noise
MIC input
,
EIN=-132 dBu/150 ohms
LINE input
,
S/N > 95 dBA at PGM output
Dynamic Range
From Line to PGM > 110dBA (Better than CD quality)
Crosstalk
PGM-AUD-SEND > 90 dBA @30-10.000 Hz
L-R & R-L > 80 dBA @ 1khz
Distortion
From LINE to PGM out < 0.01 % THD @30-15.000 Hz
From MIC to PGM out < 0.01 % THD @30-15.000 Hz
Phase
From Line to PGM
,
< 2º L&R @50-10.000 Hz
Stereo tracking
Below 0.2 dB error L/R in fader range 0 to 40 dB
Phone Hybrid
3 Hybrid inputs
,
2 for phone lines and one for cellular phone at 4 wires.
It includes a mini-PBX with Ringer
,
Line attention with free hands operation
,
and Line Transfer.
Talkback Microphone
Included Talkback MIC
,
with Audio Limiter. Noise Cancelled PZM type / Outputs to Phone Line Hybrid and Studio Speaker with AutoSwitch (AutoSwitch allows one-touch Studio communication)
VU-meters
2600XL: 4 digitally controlled VUmeters 24 steps of 1 dB
,
DUAL type (RMS & Peak) for PGM & AUD. One Timer/Clock and one
Stereo Phase Vector display
Timer /Clock Option
Timer counts minutes: seconds during on-air MIC in order to avoid excessive speaker on-air time When the Timer is off
,
a standard clock is activated
ON-AIR Signal
ON-AIR signal output (turns on when MIC is open) 12 VDC @ 0
,
3 amp
Start external devices
One Start Devices output for each input module
,
to start external devices when open each channel fader. Out at minijack 1/8" // Ring = A channel (left side) Tip= B channel (Rigth side) Open collector OFF= Open. Manages 0-24 VDC @ 100 mA. This allows to control Virtual Rack processors and start audio devices.
Power
110-127 V / 190-240V
,
with switch
,
50/60 hz
,
80 VA
Dimensions & Weight
XL model: 840 wide x 585 depth x 135 height – Weight 15 Kg
BOX : 90 x 65 x 25 cm
,
2 Kg
2600XD: 845mm wide
,
635mm depth
,
125 mm height – Weight 15 Kg
BOX: 90 x 70 x 20 cm
,
2 Kg
|
