audio-technica BP4001
In stock
| Weight | 0.5 kg |
|---|---|
| specification |
Element: Dynamic Polar Pattern: Cardioid Frequency Response: 80-18 ,000 Hz Open Circuit Sensitivity: –54 dB (1.9 mV) re 1V at 1 Pa Impedance: 300 ohms Weight: 275 g (9.7 oz) Dimensions: 240.8 mm (9.48") long ,40.0 mm (1.57") head diameter Output Connector: Integral 3-pin XLRM-type Accessories Furnished: AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; foam windscreen; carrying case; soft protective pouch |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
Sine Control Powerclamp Series 2
In stock
| Weight | 3.6287 kg |
|---|---|
| features |
40 ,000 Surge Amps Per Mode |
| specification |
TECHNICAL SPECIFICATIONS: with ULTRA-LOW CLAMPING LEVELS. Its PARALLEL INSTALLATION provides these benefits: its hybrid multistage circuitry will suppress (clamp) transient surges and spikes in all modes and bi-directionally ,as listed below. 200amps ,0.5us ,100kHz): TWO (2) VOLTS of the peak of the sine wave. 500amps ,0.5us ,100kHz): TEN (10) VOLTS of the peak of the sine wave. 1.2/50us ,3 ,000 amps): THIRTY (30) VOLTS of the peak of the sine wave.
Unit Model Number *120VF2 000 1-N ,1-G 1240VF2 000 1-G *1240VF3 000 1-N ,1-G 1208VF3 000 1-G *1208VF4 000 1-N ,1-G 240VF3 000 1-G L-L = line to line; L-N = line to neutral; L-G = line to ground; N-G = neutral to ground common mode* needed when not installed at main panel where Neutral and Ground are tied. |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
Solidyne 2600
In stock
| Weight | 2 kg |
|---|---|
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Specifications Audio Inputs One balanced stereo line (or mono Mic in 2610 & 2612); and one unbalanced AUX. Option USB 2602 ,2 stereo Digital inputs & 2 stereo Digital outputs by USB Inputs Level/Impedance Balanced LINE = -20 dBu/+22 dBu; 600~ 10Kohms Unbalanced AUX = -20 dBu/+15dBu; 600~ 10Kohms Inserts for both MIC inputs in microphone modules. Stereo insert for LINE A in LINE modules. Phantom 48v Outputs AUX Unbalanced + 4 dBm Balanced Outs; Max Level +26dBu (10K) ,+20dBm (600ohms) Unbalanced Outs; Max Level = +20dBm/600 ohms Optional Digital AES/EBU output for PGM & AUD. Digital Levels Monitor & Hybrid Outputs +4dBu / 10K 1 Hybrid On-Air Receive + 4 dBu/10K 1 Hybrid send (MIX-Minus) +4 dBu / 10K CUE Monitor with Muting Relays (line level). Microphone Processor 160mm wide ,with 3 MIC with processing facilities. 4 band EQ ,80 Hz and 10 kHz shelving ,160 Hz & 5 kHz bell shaped; +/- 14 dB action. Expander Gate to eliminate backgound noise. Audio Compressor ,20 dB action. Iluminated switchs for EQ and Compressor-Expander Monitor & Hybrid Outputs +4dBu / 10K 1 Hybrid On-Air Receive + 4 dBu/10K 1 Hybrid send (MIX-Minus) +4 dBu / 10K Headroom Digital Control Bus to start external devices when open each channel fader. Out at minijack 1/8" // Ring = A channel (left side) Tip= B channel (Rigth side) Open collector OFF = Open Manages 0-24 V DC @ 100 mA Frequency response Noise EIN=-132 dBu/150 ohms LINE input ,S/N > 95 dBA at PGM output Dynamic Range Crosstalk L-R & R-L > 80 dBA @ 1khz Distortion From MIC to PGM out < 0.01 % THD @30-15.000 Hz Phase < 2º L&R @50-10.000 Hz Stereo tracking Phone Hybrid 2 for phone lines and one for cellular phone at 4 wires. Line attention with free hands operation ,and Line Transfer. Talkback Microphone with Audio Limiter. Noise Cancelled PZM type / Outputs to Phone Line Hybrid and Studio Speaker with AutoSwitch (AutoSwitch allows one-touch Studio communication) VU-meters DUAL type (RMS & Peak) for PGM & AUD. One Timer/Clock and one Timer /Clock Option a standard clock is activated ON-AIR Signal 3 amp Start external devices to start external devices when open each channel fader. Out at minijack 1/8" // Ring = A channel (left side) Tip= B channel (Rigth side) Open collector OFF= Open. Manages 0-24 VDC @ 100 mA. This allows to control Virtual Rack processors and start audio devices. Power with switch ,50/60 hz ,80 VA Dimensions & Weight BOX : 90 x 65 x 25 cm ,2 Kg 2600XD: 845mm wide ,635mm depth ,125 mm height – Weight 15 Kg BOX: 90 x 70 x 20 cm ,2 Kg |
Solidyne D612
In stock
| Weight | 4.7 kg |
|---|---|
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
D612 Digital & Analog Console Audio Inputs 2 balanced stereo Line inputs (DIN 5) 3 unbalanced stereo Line inputs (RCA) 1 Digital stereo Line input (USB) Inputs Level & Impedance Balanced LINE = -20 dBu / +26 dBu; 600~ 10Kohms Unbalanced LINE = -15 dBu / +12 dBu; 600~ 10Kohms Phantom Power switchable ON / OFF Analog Outputs 35mm ,TRS plug) & REC (RCA connector) Both at + 4 dBm = 0 VU PGM balanced: Max Level +26dBu (10K) ,+20dBm (600 ohms) REC unbalanced ,Max level 20 dBu External Hybrid: unbalanced Mic-Minus out at + 4 dBu Digital USB Input / Output It uses the K15 Overload recommendation for broadcating; Then ,0 VU is at -15 dB Full Scale level ON-AIR Signal 12 V CC @ 0 ,12 amp (two Solidyne On-Air lights) Monitor & Hybrid Outputs 0 dBu for active speakers ,muted 1 Stereo Control ,0 dBu for active speakers ,muted 1 Stereo Studio Headphones ,with Distribution AMP up to 5 headphones ,+ 10 dBu 1 Stereo Control Headphones ,+ 10 dBu 1 External Hybrid send (MIX-Minus) +4 dBu / 10K CUE Monitor with speaker included Headroom Frequency Response 20-20.000 Hz +/- 0 ,5 dB (MIC to PGM) MIC Equalizer 160 Hz bell shaped ,4 kHz bell shaped ,8 kHz top flat curve Action + 15 dB / -15 dB MIC Compressor Threshold = 0 VU Compression ratio: < 2 dB variation for 15 dB change MIC level Noise EIN=-120 dBu / 150 ohms LINE input ,S/N > 75 dBA Dynamic Range Crosstalk Distortion Phase < 3º L&R @50-10.000 Hz Stereo Tracking Telephone Hybrid Specs One phone line plus one cellular (Bluetooth linked) Frequency Response: 200 – 5.000 Hz Noise: > 60 dBA S/N Rejection: > 35 dB rejection NULL adjust in front panel preset Preference atenuator: 12 dB local announcer interrupt priority Telephone input lightning discharge safety External gas discharge protection is recommended Talkback Microphone with Audio Limiter. Noise Cancelled PZM type. Outputs to Phone Line Hybrid or Studio Speakers & Headphones. VU-meters & Compression Level Microphone compressor level meter 0 – 15 dB AoIP Optional TCP / IP Digital Streaming Output Used for sending D612 output to transmitter plant with MP3 Internet streaming or using a 5 ,8 GHz 802. Link Also can be used for AoIP connection with another console located inside or outside studios It can work in linear PCM at 44.1 & 48 kHz or MP3 VBR On-Air information using GPIO for remote processors AoIP Delay and user modes 44.1 and 48 kHz) MP3 Layer 2 (16 ,22.05 and 24 kHz) 16bit PCM uncompressed (8 ,16 ,32 ,44.1 & 48 kHz) Full duplex (transmitting and receiving) Delay using PCM at 48 kHz Fs (recommended) Less than 5 mS Delay using MP3 streaming. Average 100 mS Power 20VA [28V@0 ,57A] Dimensions & Weight Net Weight: 4.7 Kg |
| features |
8 channels ,with 5 faders with connectors (used to change it without soldering) 4 balanced MIC 2 LIN balanced (DIN 5) ,3 LIN unbalanced (RCA) ,1 digital input USB ,2 Hybrid telephone (RJ11 & Bluetooth) ,1 Monitor Air (Jack 6.35 mm) 4 outputs stereo; selectable PGM or REC with muting logic; Speakers Studio ,Studio Headphones (with Distributor Amplifier) , Headphones Control ,CUE mono (with amplifier and internal speaker). flush mounting on any table without cutting it 55 A |
Sonifex RB-DS2
In stock
| Weight | 2.3 kg |
|---|---|
| specification |
Technical Specification For RB-DS2 A/D Specification Maximum Input Level: Input Impedance: Analogue & Digital Input Levels: +18dBu ,+24dBu for FSD Analogue Pre-set Input Gain Range: Signal to Noise: Dynamic Range: Distortion & Noise: D/A Specification Maximum Output Level: Output Impedance: Dynamic Range: Analogue Output Gain Range: ref FSD Sampling Frequency: 44.1kHz ,48kHz 64kHz ,88.2kHz or 96kHz Sample Width: Channels: Format (Fields & Frames): NTSC Delay Units: fields ,frames ,milliseconds ,hh:mm:ss ,(with CF expansion) Maximum Delay: 24bit ,stereo (excluding memory expansion) Rear Panel Connections Analogue Inputs: Analogue Outputs: Digital Inputs: Digital Outputs: Remote I/O Port: 8 GPI inputs ,4 GPI outputs Serial Comms Port: Memory Expansion: Mains Input: continuously rated 85-264 VAC ,47-63Hz ,fused ,60W peak ,30W average Fuse Rating: Front Panel Controls Display: System Navigation: Audio Bypass: Equipment Type RB-DS2: Physical Specification Dimensions (Raw): 19” (W) x 6.2” (D*) x 1.7” (H) (1U) Dimensions (Boxed): 23.2” (W) x 10.8” (D*) x 4.3” (H) Weight Nett: 3.5lbs Gross: 4.8lbs |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
Sonifex Net-Log
In stock
| Weight | 4 kg |
|---|---|
| Dimensions | 55 × 28 × 17 cm |
| Product can be split into multiple boxes |
0 |
| Ship Separately |
0 |
| specification |
Technical Specification For Net-Log Audio Specification Input Impedance: Maximum Input Level: Distortion: Signal to Noise Ratio: Wow and Flutter: Phase Error at 10kHz: Rear Panel Connections ,Controls and Indicators Analogue Inputs: Input Level Controls: Network: Network Status LEDs: Tx ,link and collision. RS232: Alarm Outputs and Remote Inputs: Power: 95-265 VAC ,47-63Hz. Controls and Indicators Front Panel Controls: Front Panel Power Indicator: Front Panel Alarm Indicators: disk drive alarm LED (red) ,archive alarm LED (red) Front Panel Level Indicators: 1 for each channel (green ,orange ,red) Rear Panel Network Indicators: receive (RX) ,transmit (TX) ,link and collision LEDs Additional Information Sample Rates: 22.05kHz ,24kHz ,32kHz ,44.1kHz and 48kHz Audio Format: Recording Types: dual mono ,stereo Hard Disk Capacity: PC Soundcard Needed: Equipment Type Net-Log-01 with large hard disk (contact sales@sonifex.co.uk for current sizes available) Net-Log-Win01 Net-Log-Win05 Net-Log-UPS01 Net-Log-G729 Physical Specification External Dimensions: 1U 19” rack x 8.7” deep 19” (W) x 8.7” (D) x 1.7” (H) (1U) Boxed Dimensions: 21.7" (W) x 11.6" (D) x 6.5" (H) Weight: |
| features |
Key Features of Net-Log Dedicated reliable multi-channel recording hardware. archiving ,streaming and configuration. different bit rates and in mono or stereo. e.g. 2 channels of low quality logging for 12 months together with two channels of high quality logging for 1 month ,on one machine. e.g. snoop recording from mic-live output of a mixer. which means that it can be used for voice controlled systems and telephony recording. 000 recordings per channel can be made. so a number of machines can be installed on the same network. allowing longer recordings and lower network traffic. G.729 audio quality is comparable to MPEG L2 at 32kbits/sec when used to record/playback speech. |
Tannoy Reveal 802
In stock
| Color |
Black |
|---|---|
| features |
<h2>Features: Front</h2> |
| specification |
<table class="product-tab-table"> RMS</th></tr> 20 kOhm</td> 10 kOhm</td> 10 kOhm</td> inches</td> mm</td> |
| Ship Separately |
0 |
| Product can be split into multiple boxes |
0 |
| video |
0 |
