
The RVR PTRL-LCD and RXRL-LCD are a broadband radio transmitter and receiver designed to carry audio signals to support sound FM radio broadcasting. This type of device is also known as STL (Studio-to-Transmitter Link). This transmitter in combination with the RXRL-LCD makes sure you can benefit the key audio features like low distortion and inter-modulation values and a high noise/signal ratio.
Together with the PTRL-LCD the RXRL-LCD makes an excellent STL ( Studio – Transmitter Link)
The Mono and MPX outputs can be connected to the transmitter directly or you can use the optional Left and Right output for stereo signals.
- PRIMARY APPLICATION: PTRL and RXRL are a broadband radio transmitter and receivers manufactured by R.V.R. Elettronica designed to carry audio signals to support sound FM radio broadcasting. This type of device is also known as STL (Studio-to-Transmitter Link).
- RADIO LINKS TOPICS: excellent price/performance ratio.
- AUDIO PERFORMANCE: key audio features are low distortion and inter-modulation values and a high noise/signal ratio.
- HARDWARE FEATURES: R.V.R. PTRL & RXRL are extremely compact and nearly indestructable thanks to the stainless steel chassis, in 2 rack units (2HE) each only.
- INPUT/OUTPUT INTERFACE: built-in high-performance stereo coder, L&R analogue audio inputs, Mono inputs, MPX composite signal and auxiliary inputs for SCA / RDS signals.
- WORKING FREQUENCIES: standard working frequency bands are 200 MHz÷960 MHz in any 20MHz wide band. Working frequency (hence, the frequency band) must be specified on order.
- EASE OF MAINTENANCE: advanced module engineering ensures extreme ease of access and simple maintenance.
- TECHNOLOGICAL INNOVATION: the SMD technology ensures enhanced business continuity.
- INTERFACE CONTROL: total control thanks to microprocessor easily programmed from menu or via RS232 with all key parameters displayed on LCD.
- REMOTE CONTROL: key parameters are also available at the telemetry connector for machine remote control.
- RELIABILITY/CONTINUITY: a 24V DC connector connected to a battery or other power source ensures uninterrupted operation in the event of mains failure.
- Rated output power: 10/20W
- Frequency range: 200-960MHz Any 20Mhz bandwidth (Other frequencies available on request)
- Operational mode: Mono, Stereo, Multiplex
- Modulation type: Direct carrier frequency modulation
- Primary Power: 80 ÷ 260 VAC or 24 VDC
- AC power Consumption: 48VA
- Phisical Dimensions (W x H x D): 483 x 88 x 325 mm
- Weight: 6 kg
- Environmental working temperature: -10 ÷50 °C / 95% relative Humidity non-condensing
- Frequency stability: ±1 ppm
- Spurious & harmonic suppression: <70 dBc
- Asynchronous AM S/N ratio: ≥60 dB
- Synchronous AM S/N ratio: ≥50 dB
- Preemphasis: 0/50 (CCIR) μS, 75 (FCC) μS selectable by software
- MONO/MPX OPERATION
- S/N FM: >75 dB (1600MHz); >70 dB (2400 MHz)
- Frequency response: ± 0.1 dB (40 Hz ÷ 100kHz)
- Total harmonic distortion: ≤0.05 %
- OPTIONAL INTERNAL STEREO CODER OPERATION
- S/N FM: >72 dB (1500 ÷ 1800MHz); >67 dB (2300 ÷ 2400 MHz)
- Frequency response: ± 0.1 dB (40 Hz ÷ 100kHz)
- Total harmonic distortion: ≤0.05 %
- Stereo separation: >50 dB
- AUDIO INPUTS / OUTPUTS
- Left Mono: XLR F balanced;
- Impedance: 10 k ohm;
- Level: -4 ÷ +13 dB
- Right: XLR F balanced;
- Impedance: 10 k ohm;
- Level: -4 ÷ +13 dB
- MPX unbalanced/RDS: BNC unbalanced;
- Impedance: 10 k or 50 ohm;
- Level: -4 ÷ +13 dBu
- SCA: BNC unbalanced;
- Impedance: 10 k ohm;
- Level: -12 ÷ +4 dBu
- OTHER CONNECTIONS
- RF output / input: N (50 ohm)
- RF Monitor: BNC; Level: 0 ÷ +10 dBm
- Interlock in: BNC
- STANDARD COMPLIANCE
- Safety: EN 60215:1989
- EN60215/A1:1992-07
- EN60215/A2:1994-09
- EMC: EN 301 489-1 V1.4.1 (2002-08)
- EN 301 489-11 V1.2.1 (2002-11)
- Spectrum Optimization: EN 300 454-2 V1.1.1 (2000-08)
Reviews
TRU Price Guarantee
(Subject to conditions)
Tech Support

2-Year Warranty

There are no reviews yet.