RigExpert AA 55ZOOM 1

The RigExpert AA-55 Zoom analyzer is designed for measuring SWR (Standing Wave Ratio), Return Loss, Cable Loss, of cable and antenna systems from 60 kHz to 55 MHz.

A built-in ZOOM capability makes graphical measurements especially effective.

The following tasks are easily accomplished by using this analyzer:

  • Rapid check-out of an antenna
  • Tuning an antenna to resonance
  • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
  • Making coaxial stubs or measuring their parameters
  • Cable fault location
  • Measuring capacitance or inductance of reactive loads

The AA-55 ZOOM differs from previous models in that it has:
· Enlarged 3.2 inch color TFT display (320×240).
· Scanning speed has increased over AA-54.
· Large waterproof keypad keys.
· Same dimensions as our AA-30/54/170.

  • Rapid check-out of an antenna
  • Tuning an antenna to resonance
  • Comparing characteristics of an antenna before and after specific event (rain, hurricane, etc.)
  • Making coaxial stubs or measuring their parameters
  • Cable testing and fault location, measuring cable loss and characteristic impedance
  • Measuring capacitance or inductance of reactive loads
Frequency range: 0.06 to 55 MHz
Frequency entry: 1 kHz resolution Measurement Impedance for 25, 50, 75 and 100, 150, 200, 300, 450 and 600-Ohm systems SWR measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes SWR display: numerical or analog indicator R and X range: 0-10000, -10000-10000 in numerical modes, 0-1000, -1000-1000 in chart modes Display modes:
–    SWR at single or multiple frequencies –    SWR, return loss, R, X, Z, L, C at single frequency –    SWR chart, 100 points –    R, X chart, 100 points –    Smith chart, 100 points –    Return loss chart, 100 points –    Cable tools (loss and characteristic impedance)
Optional open-short-load calibration. RF output:
–    Connector type: UHF (SO-239) –    Output signal shape: square, 0.06 to 55 MHz –    Output power: +13 dBm (at 50 Ohm load)
Power:
–    Two 1.5V alkaline batteries, type AA –    Two 1.2V Ni-MH batteries, type AA * –    Max. 4 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used –    When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources
Interface:
–    320×240 color TFT display –    6×3 keys on the water-proof keypad –    Multilingual menus and help screens –    USB connection to a personal computer
Dimensions: 103 mm x 207 mm x 37 mm (4.1 in x 8.1 in x 1.4 in) Operating temperature: 0…40 C (32…104 F) Weight: 310 g (10.9 Oz) w/o batteries Warranty: 2 years RigExpert AA-55 ZOOM is made in Ukraine. Specifications are subject to change without notice. * Batteries are not included with the analyzer.
BW Price Guarantee

(Subject to conditions)

RigExpert AA-55 ZOOM

$440.00

Tech Support

2-Year Warranty

$440.00

Related products
BROADCAST RigExpert AA-55 ZOOM