RigExpert AA-2000 ZOOM

Name: RigExpert AA-2000 ZOOM
Brand: Broadcasters Warehouse
SKU: RigExpert AA-2000 ZOOM
Price: 1428 EUR
Availability: InStock
Rating: 5 (1 reviews)

Antenna Analyzer

Sale!

RigExpert AA-2000 ZOOM

RigExpert AA-2000 ZOOM Antenna Analyser 100kHz to 2000MHz

The analyser is designed for measuring SWR (Standing Wave Ratio), Return Loss, Cable Loss, of cable and antenna systems from 100 kHz to 2000 MHz.

A built-in ZOOM capability makes graphical measurements especially effective.
An integrated Time Domain Reflectometer mode can be used to locate the precise location of a fault within the feed-line system.

RigExpert Antenna Analysers are powerful antenna analysers designed for testing, checking, tuning, or repairing antennas and antenna feed-lines.

Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers). Their large, bright LCD screens provide graphic illustration of SWR, impedance; return loss, and much more.

Easy to use measurement modes, as well as additional features such as connection to a personal computer (to plot Smith charts, etc.); make RigExpert analyzers attractive for professionals and hobbyists alike. They are compatible with several operating systems, including Windows© 10.

The graphic display of various parameters over a wide frequency range is a key feature of these analyzers. This significantly reduces the time required to adjust an antenna. Their various ZOOM models even allow you to zoom-in on graph points for clearer analysis. USB connection allows export of sweep files with AntScope software to PC or MAC. Some models have Bluetooth for direct file transfer without USB cable, for galvanic isolation which provides the most accurate measurements.

RigExpert Antenna Analyzers are available in several models and in various frequency ranges of operation. Each is fitted with an SO-239 female connector, except for those models that will operate at 230 MHz and above, where a Type N connector is more efficient. An array of options are available to cover HF, UHF, and VHF bands.

Rapid check-out of an antenna
Tuning an antenna to resonance
Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.)
Making coaxial lines or measuring their parameters
Cable testing and fault location
Measuring capacitance or inductance of reactive loads

Frequency range: 0.1 to 2000 MHz Frequency entry: 1 kHz resolution Measurement for 25, 50, 75, 100, 150, 200, 300, 450 and 600-Ohm systems SWR measurement range: 1 to 100 in numerical mode, 1 to 10 in graph mode SWR display: numerical or easily-readable bar R and X range: 0…2000, -2000…2000 Display modes: – SWR, – Return loss, R, X, Z, L, C, – Magnitude and Phase Angle at a single frequency, – SWR chart (100 points). SWR chart at fixed HAM bands by IARU Regions (100 points), – Cable tools (Velocity factor & Cable length measurer, Stub tuner, Cable loss chart, Cable impedance chart), – TDR Optional open-short-load calibration in SWR, R, X, or Smith/polar chart graph modes. RF output: – Connector type: N – Output signal shape: square, 0.1 to 200 MHz. For higher frequencies, harmonics of the main signal are used. – Output power: -10 dBm (at 50 Ohm load) Power: – Three 1.5V, alkaline batteries, type AA * – Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA – 3×3.7V Li-Ion/Li-PO accumulators, size AA – Max. 3 hours of continuous measurement, max. 2 days in standby mode when fully charged batteries are used – When the analyzer is connected to a PC or a DC adapter with a USB socket, it takes power from these sources Interface: – 400*800 color BlanView display – 6×3 keys on the water-proof keypad – Multilingual menus and help screens – USB connection to a personal computer – Bluetooth v. 4.2 (Single-mode, Class B) Dimensions: 23x10x5.5 cm (9x4x2”) Operating temperature: 0…40 °C (32…104 °F) Weight: 650g (23 Oz) Warranty: 2 years RigExpert Care GTIN-13: 4820185420310 RigExpert AA-2000 ZOOM is made in Ukraine. Specifications are subject to change without notice. * Batteries are not included with the analyzer.