10W FCC Part 73 AM Transmitter
|The ISS TR.6000 provides a 10-watt emergency / reduced power service for a broadcaster under FCC Part 73/1560 or unlicensed broadcast operations under FCC Part 15.221. FCC Certification Number B7MTR-6000TIS-WB.|
|The TR.6000 Model 15.73’s processing circuitry manages the audio output, providing a level of quality never before possible from a 10-watt AM transmitter.|
|The TR.6000 Model 15.73’s RF circuitry operates on a “Class D” amplifier design, delivering its signal using 1/3 the electrical power of conventional transmitters of its kind. The resulting decrease in size of the solar generator and battery systems lowers the cost to procure, operate and maintain radio systems employing the TR.6000 Model 15.73. Defeat-able LED operation reduces power utilization even further.|
|The TR.6000 Model 15.73 is the only transmitter of its kind on the market today that generates its signal using only two output devices. This critical design difference makes the transmitter much more reliable in operation than its predecessors. Because the TR.6000 Model 15.73’s components are sized for larger output levels, it runs cool and at a fraction of its capacity, even at 10 watts, extending its useful life. The transmitter’s RF, power, control and audio circuitry is protected by a fully regulated power supply, so reliability is further enhanced.|
|TR.6000 Model 15.73 can operate on any AM frequency – even those with 9 kHz spacing – without a crystal change. A technician can modify its frequency on the bench, conveniently. The unit can mount in a 19” rack, on a panel or on a shelf, allowing TR.6000 Model 15.73 to operate in virtually any physical environment. Its compact size – just one rack unit in height – and lightweight, allows it to be installed almost anywhere.|
|TR.6000 Model 15.73 includes all the functions you expect in one package. Convenient external front panel controls include a LED wattmeter and modulation meter, power and modulation level controls, power and meter switches, monitor speaker and external on/off relay controls. This transmitter is capable of precision RF output using its onboard oscillator or via a reference port that admits an external 10 Mhz signal for additional stability and/or multi-transmitter synchronization.|
- Made in the USA.
- The 0-10-watt operation, Class D, high-efficiency output; internal components rated to 3 times operating wattage, utilizing 2 output devices.
- IPC-610 certified.
- Manufactured in compliance with Class-3 wave solder standards.
- Approved for military and federal agencies use on 510-530 kHz, 1610-1710 kHz - Certification: J/F 12/07677.
- Integral LED wattage and VU reference meters.
- Remote broadcast monitoring via output control relay.
- Remote transmitter control relay.
- Synthesized frequency selection.
- Defeat-able LED operation to save power.
- Internal monitor speaker with volume control driven by detector circuit to provide positive modulation indication.
- 24V DC, fully regulated power supply.
- Frequency range: 530 to 1710 kHz AM.
- Frequency: factory-set (specify).
- Frequency stability +/-20 Hz.
- Continuously adjustable power and audio modulation controls, externally accessible on the front panel.
- Tunable to 10 kHz, European 9kHz and all other channel spacing formats.
- Tunable series filter on RF output.
- Audio distortion: less than 1.2%, 100 Hz to 5 kHz.
- Audio frequency response: +/- 3 dB 50 Hz-12,000 Hz; +/- 3 dB 50 Hz - 5000 Hz with TIS filter.
- Noise level: 70 dB below 95% modulation level, 100 Hz to 5 kHz.
- Modulation: 99%, -40 dB to +20 dB.
- Temperature: -40 to +85 degrees Celsius.
- Humidity: 95% (non-condensing).
- External audio (balanced), up to 150 mV p-p; power and synchronization inputs.
- Relays for external control of power and to monitor audio.
- External PL-259 UHF style RF output.
- Spurious emissions:
- 10.2-20 KHz – greater than 25 dB below the unmodulated carrier.
- 20-30 KHz – greater than 35 dB below the unmodulated carrier.
- 30-60 KHz – greater than [5+1 dB/kHz] below the unmodulated carrier.
- 60 kHz + – greater than 65 dB below the unmodulated carrier.
- Harmonic attenuation: greater than 51 dB below the carrier.
- 1 rack unit.
- Slim-line design (1.75” height, 17” width, 9” depth) and 4 pounds.
- Power supply: input 90-265 VAC; output 24 VDC.
- Mean time between failure - in excess of 60 years.
- Estimated product life = in excess of 30 years.
BW Price Guarantee
(Subject to conditions)