
The Glensound Express Box MK11 was designed to provide a quick and easy solution when it is necessary to provide interfacing for two commentators, with simple facilities. This high quality commentary unit is ideal for those looking for cost effective solutions without paying for unwanted features; the Express Box is worthy of investigation.
Inputs
Two front panel mic inputs with selectable 48v phantom power.
Outputs/Talkback
Each mic input has its own individual output. There is also a mixed output of the two mic inputs. The two talkback circuits have individual outputs and are common for both commentators.
Monitoring
There are four inputs for external sources, and one sidetone pot of their own voice. These are available independently to each commentator on individual pots, so each can adjust the inputs for their own preference of mix level. There are two 6.35mm headphone sockets – 1 for each commentator. A 7 segment LED PPM meter displays level.
- Two commentary positions
- Four external monitor inputs plus sidetone
- Two common talkback circuits
- Operation of talkback buttons configurable
- Mic inputs with selectable 48v phantom power
- 7 LED PPM meter
- Easy to use and cost effective
MICROPHONE INPUTS | |
---|---|
Mic Gain (Dynamic): | 54dB |
Mic Gain (Phantom Power): | 44dB (37dB via internal link) |
Input Impedance: | 1k2 |
Noise @ Channel Outputs: | >= -70dB (22Hz - 22kHz A weighted 300 Ohm termination) |
Noise @ Mix Output: | >= -67dB (22Hz - 22kHz A weighted 300 Ohm termination) |
Phantom Power: | 48 Volts @ 9.7mA |
COMPRESSOR/ LIMITER | |
---|---|
Type: | Complex multi-point curve |
Input Level: | Output Level |
-54: | 0 |
-44: | +5 |
-34: | +8.5 |
-24: | +10 |
-19: | +12.5 |
Headroom: | 35dB |
OUTPUTS | |
---|---|
Type: | Electronically balanced, fully protected |
Impedance: | < 50 Ohms |
SIGNAL PATH (Input to Output) | |
---|---|
Frequency Response: | Flat : 53Hz to 10.5kHz |
Frequency Response: | <= -1dB : 40Hz to 15.2kHz |
Frequency Response: | <= -3dB : 30Hz to 22kHz |
Distortion: | -44dB input : 100Hz <=0.04% : 1kHz <= 0.01% : 10kHz <= 0.006% |
HEADPHONES | |
---|---|
Line input impedance: | > 47kOhms |
Frequency Response from Inputs: | >= +/-2dB 50 Hz to 24kHz |
Gain/Loss Range: | Off to + 10dB |
Headphone Impedance: | 35 - 1000 Ohms |
POWER | |
---|---|
Mains Input: | 85 - 264 VAC |
Power Consumption: | 3 Watts |
SIZE & WEIGHT | |
---|---|
Dimensions: | 220 x 250 x 98mm (W x D x H) |
Weight: | 1.46 Kg |
BW Price Guarantee
(Subject to conditions)
Tech Support

2-Year Warranty

$1,675.00