Elenos ETG1000
1kW FM Transmitter
Elenos ETG1000
Energy-efficient, compact, and reliable FM Transmitters by Elenos
The Elenos ETG1000 maximizes the concept of energy efficiency, compactness, and reliability that have steered the design over the past ten years. All the transmitters in this line are extremely compact and light, which makes for easier installation and lower transportation costs.
The high energy efficiency also allows for a much lower operating cost.
Because of intelligent protocols, Icefet technology, and Lifextender algorithms, this product line is also characterized by extremely high reliability and high performance even under extreme operating conditions due to intelligent safety protocols, Icefet technology, and Lifextender algorithms.
The intelligent protocols are activated proportionately to the harshness of the environmental condition, thus guaranteeing the maximum power output with respect to the safety of the equipment.
The models from 150 to 500 watts can also operate with a DC power supply of 48VDC (operating range 40-56 VDC), designed for operation with renewable energy sources such as wind and/or solar.
- GENERAL DATA
- Output Nominal Power:1000W adjustable
- Operating band:87.5 - 108 MHz
- RS232/RS485:Yes
- Points of measure:RF Sample - MPX Monitor
- Displayed Parameters:More than 50 parameters displayed on a wide graphic OLED
- Adjustments:From the frontal panel through OLED/from PC
- Number of L-DMOS in power amplifier stage:2
- RF power stage technology:ICEFET & ECOSAVING
- Dimensions: Rack units:2U
- Dimensions: W - H - D:48.5 - 8.5 - 58.5 cm
- Weight:13.2 Kg
- Number of cooling fans:3
- CONNECTORS
- RF Output connector:7/16
- MPX Connector:BNC Female
- LEFT & RIGHT Connectors:XLR Female
- AES/EBU Connector:XLR Female
- AUX Connectors:BNC Female
- Monitor/19kHz Connector:BNC Female
- RF PERFORMANCE
- Output impedance:50 Ω
- Automatic power RF control:Stabilizes the output power value on the set value
- Overall output power RF stability:+/-0,1 dB
- VSWR:2:1 on full power
- automatic power reduction beyond 1.5:1
- transmitter is protected for short and open circuit
- Harmonics:< -75 dBc
- Out of band emission (spurious):< -80dBc
- Stereo Crosstalk:>60 dB linear
- >60 dB non-linear
- @ 30 Hz to15 kHz, L/R channel (100% modulation)
- Intermodulation distortion:<0.05% Measured with two of tones 1KHz & 1.3KHz, ratio
- 1:1 at 100% modulation
- Class of emission:F3
- Stereo emission:According to ITU-R reccomendation
- 450 (pilot tone)
- EXCITER PERFORMANCE
- PLL lock time:<10sec
- Frequency deviation:+/- 75 KHz 0.1 dB steps adjustable
- Maximum frequency deviation:+/- 150 kHz
- Frequency stability:1ppm
- RF Frequency steps:10 KHz
- Phase Response:0.1 degree from linear phase; 53kHz to 100kHz
- Modulation Capability:+/-250 KHz
- MPX/STEREO CODER PERFORMANCE
- AES/EBU Input Resolution:24bits
- AES/EBU Input Sample Rate:32,44.1,48,96 KHz Automatically selected
- L/R Audio input level:+15/-10 dBu for 75KHz standard deviation
- L/R level adjustment:Soft adjust 0.1dB steps from front panel
- L/R Input Impedance:Selectable 10K - 600 Ω, balanced (for analog)
- 110 Ω (for digital)
- MPX audio input level:+15/-10 dBu for 75KHz standard deviation
- MPX level adjustment:Soft adjust 0.1 dB steps from front panel
- MPX Input impedance:5KΩ selectable
- SCA/RDS audio input level:0 dBu for 75KHz standard deviation
- AES/EBU input level:-20 dBFS - -0 dBFS
- PILOT Amplitude adjustment:Soft adjust 0.05% steps from front panel
- PILOT Phase adjustment:Soft adjust 0.01 degree steps from front panel
- PILOT tone frequency:19 KHz
- PILOT tone deviation:Soft adjust +/- 7.5 KHz
- PILOT tone frequency stability:+/-1 Hz
- 19KHz Output:Yes
- AES/EBU-Analog input automatic changeover:Yes
- THD+N:< 0.05% with 75 kHz frequency deviation
- < 0.05% with 100 kHz frequency deviation
- @ 30 Hz to15 kHz, L/R channel
- Pre-emphasis:0/25/50/75 microseconds selectable
- Pre-emphasis tolerance:+/- 0.1 us
- FM S/N MPX FCC:82 dB 20Hz - 23KHz - 50uS - ref @ 53KHz - RMS
- FM S/N STEREO CCIR:> = 72 dB weighted
- > = 72 dB unweighted
- @ fmod = 400 Hz, 75 kHz frequency deviation, peak value
- measurement, L/R/MONO channel
- Asynchronous AM S/N unweighted:> = 50 dB
- Synchronous AM S/N:> = 50 dB
- Modulation frequency range:30Hz to 15kHz
- Amplitude-frequency characteristic:+/-0.1 dB (without pre-emphasis)
- +/-0.1 dB (with pre-emphasis)
- @ fmod = 400 Hz, 30 Hz to15 kHz, L/R/MONO channel
- INSTALLATION REQUIREMENTS
- Power supply:230 Singlephase Version 50-60Hz VAC
- Power consumption (typical):1500W
- Current consumption (typical@230V):6.5A
- Overall efficiency (typical from -3dB to Pnom):66%
- Power factor:> 0.95
- COOLING/NOISE DATA
- Cooling system:Forced air-cooling
- Acoustic noise:< 65 phon
- @ transmitter room, 2 m distance of the front of transmitter
- ENVIRONMENT
- Temperature range (operating):-5 - +45 °C
- Temperature range (non operating):-20 - +55 °C
- Humidity range (operating):95% @ 40 °C
- Humidity range (non operating):90% @ 55 °C
- Altitude range (operating):
- Altitude range (non operating):
- TELECONTROL & TELEMETRY
- Remote control:Yes
- Remote Control at clean contacts:Yes
- SNMP option:Yes (external)
BW Price Guarantee
(Subject to conditions)
Tech Support
2-Year Warranty
$4,775.00
