D&R AXITE IP
On Air Production Mixer with 12 faders
D&R AXITE IP digital studio platform
create your ideal console,
with the touch of just one finger
EXAMPLE CONFIGURATION of DR AXITE IP (Priced in the price box)
DR AXITE ip with 12 Faders + CRM section in Drop-through, 1x Mic AD, 2x Line AD, 1x Line DA, 1x CRM 1x DSsrc, 1x Hybrid, Rack ONE has space for 8 more I/O cards, 4x breakout panels are included.
The new DR AXITE IP (based on the AXUM platform) is a new modular completely preprogrammed platform that can grow with you and your organization any time, any moment.
I/O cards can be shared between systems and if you have decided to use the AXITE as your main mixer you can be sure to have invested in a future-proof product. The DR AXITE IP can be used for small local 6 fader desktop use as well as large scale (128 processing channels max) production work and everything in between.
Imagine a console where you can decide for yourself what a switch/encoder or fader will do for you. Not possible?
With the DR AXITE IP, this is possible, and… you can do that yourself by selecting a function out of hundreds of functions simply selectable from a database in your AXITE/AXUM browser. You want 2 studios to share the same I/O cards? Buy two control surfaces (with their own CRM sections) put them in different rooms and share over your LAN the same I/O rack, no problem for the AXITE/AXUM platform.
Hardware purchasing choices are straightforward:
Rack ONE accepts a maximum of 21 I/O single-slot cards.
Rack TWO accepts a maximum of 37 I/O single-slot cards.
I/O-cards
With the D&R AXITE’s modular concept, our MambaNet™ protocol controls the primary portion of the I/O rack. Each I/O card is shared in the network and can be controlled from the network.
The I/O cards together with the rack will behave like a large Matrix in the network. Every inserted DSP card gives you 32 stereo channels with full control over the EQ and dynamics of the audio, a maximum of 4 DSP cards is accepted.
The huge amount of in- and outputs per card could not be designed with a dedicated (jack/Cinch/XLR connector in the space available on the front of the card.
By using standard STP cables in every input and output module, a compact and neat cabling can be achieved. Due to standardization, changes in wiring can be achieved very easily without the need for soldering.
These low-cost Cat-5 cables are ready-made available from us or from your nearest computer store, starting at lengths of 30 cm up to 20 meters.
I/O-rack
The huge amount of in- and outputs per card could not be designed with a dedicated (jack/Cinch/XLR connector in the space available on the front of the card.
By using standard STP cables in every input and output module, a compact and neat cabling can be achieved. Due to standardization, changes in wiring can be achieved very easily without the need for soldering.
These low-cost Cat-5/6 cables are ready-made available from us or from your nearest computer store, starting at lengths of 30 cm up to 20 meters.
If you need to connect a MICROPHONE to the DR AXITE IP take our 19” part number 60882045 break out panel.
Mount it in your studio rack, hook up a shielded RJ45 (STP) cable between the RACK and this Mic input panel, and you’re ready.
This also includes the remote wiring! No need to buy twice the amount of expensive XLR’s.
We have five types of patch panels available to choose from, see below.
RACK ONE (3HE) can accept 21 one slot cards.
There are 16 available slots for I/O cards
(5 are used for POWER and Engine card)
Weight is 4.6 kg with an 80% card fill.
RACK TWO (6HE) accepts 40 I/O one slot cards.
Two internal power supplies cards (3 slots each on the left side) are necessary as well as one Engine card (2 slots, on the right-hand side of the Rack), a redundant power supply is optional.
If you just want I/O routing, no DSP card is necessary.
But if you want signal processing, one DSP card is always necessary to control 32 stereo channels as a maximum.
More DSP cards (4 max) give more processing channels (up to 128)
A range of I/O cards can slide into the 19″ rack to achieve the necessary number of analogue and digital in and outputs your studio needs.
Any changes can be performed while ON-AIR.
RACK TWO can accept 37 one slot space I/O cards.
There are 35 available slots for I/O cards (8 are used for POWER and Engine card)
Interfaces for the AXITE
The D&R Axite interfaces easily with CobraNet™ and Dante compatible devices, it is designed as a long term solution to the needs of Broadcast facilities for future innovations and developments in broadcast audio and software.
Break-out panels
The defacto standard for interfacing digital audio components to I/O racks is by use of RJ45 connectors with STP (Shielded
Twisted Pair) cable.
D&R used this breakout system in earlier D&R consoles with success. The rack-mounted interface units have either balanced ¼” Jacks and/or XLR connectors on the front panel and shielded RJ45 connectors on the back panel that are used to connect to the I/O rack. Below you see a number of passive break out panels.
Metering software
Phase meters on surface-screen
6 PPM meters on surface-screen
32 PPM meters on surface-screen
Broadcast clock
Extra label fields
Red-light
Studio 1-4 visible
Phone active detection
Cable disconnect detection
Channel processing on screen
- 6 to 126 Alps faders
- Faders can be used for channel faders and buss master faders
- Scalable On-Air/Production Console
- Separated control surfaces and I/O racks
- Control surfaces connected by Ethernet.
- Internal website for console setup.(already pre-programmed in the factory)
- I/O matrix of 1280 x 1280
- 16 stereo summing buses (Prog, Sub, Cue, Comm, 12x Aux) and 4 stereo monitoring buses
- 16 Talk back buses
- 4 stereo monitor buses per DSP card
- Inputs can directly assigned to the outputs
- 128 Stereo DSP channels max (4 DSP Cards inserted)
- 6 band comprehensive EQ
- Enhanced Voice Processing built in
- Processing / Module & Console presets
- Direct outputs available
- Converters are 24bit / 96kHz
- On-Air & Phone indication on screen
- Phase meters on modules, buses, monitor
- High precision Broadcast Clock
- Redundant power supply optional for both Control Surface and I/O rack
- Dante compatible
General:
Matrix up to 1280x1280.
Word clock input or internal generator.
Synchronization
Word clock input or internal generator.
32 kHz, 44.1 kHz, 48 kHz.
Word clock out 75R.
Selectable 75 Ohm termination on word clock input.
Dimensions:
AXITE 6 fader Main unit for drop through mounting.
Width: 375 mm
Height: 335 mm
Drop through hole: 350 mm x 310 mm
Front Panel Thickness: 2 mm
AXITE 6 fader EXTender.
Width: 255 mm
Height: 335 mm
Drop through hole: 230 mm x 310 mm
Front Panel thickness: 2 mm
32 mixing busses.(Program|Sub|Cue|Comm|24x Aux)
6 band fully parametric equalizer.
MIC
Electronically balanced, 2Kohm.
Analog input sensitivity -70dBu up to +20dBu (Pad).
CMRR MIC inputs: 85dB @ 1kHz, maximum gain.
Optional transformer balancing.
Line input
Electronically balanced, 10kOhm.
Input sensitivity +6 dBu, maximum +26dBu.
CMRR Line inputs: 50dB @ 1kHz, maximum gain.
Optional transformer balancing.
Line Output
Electronically balanced, <47Ohm.
Output level +6dBu, maximum output level +26 dBu.
Optional transformer balancing.
Optional transformer balancing.
Headphones out:
- 80mW into 600R.
- minimum load 8 Ohm.
Digital Inputs/Output
Sample rate conversion.
AES/EBU (AES3), S/P-DIF (cinch or optical).
16/20/24 bit.
THD+N: -105dBfs @1kHz, 0 dBFS.
Input/Output impedance: 110 Ohm (XLR) / 75 Ohm (Cinch).
Output level: 2 to 5 volt
GPI
5V TTL, 100 kOhm input impedance
GPO
Selection of optical isolated relay or 5V TTL output
Optical isolated relays is max: 50V at 200mA
BW Price Guarantee
(Subject to conditions)
Tech Support
2-Year Warranty
$10,309.00
