DR AIRMATE-12

D&R AIRMATE-12

   the most personal options,

                            inside an analog radio mixer

117-1179152_voip-call-icon-voice-over-ip.png
RIAA.png
AES.png
usb-logo-2.png

We designed the DR AIRMATE-12 to fulfill the requirements for a high grade radio production mixer. This console is the reliable workhorse for the self-op production D.J. that needs an internal two Telephone Hybrid and USB connection to the PC (e.q. for streaming to the web).

A heavy-duty 19″ rack-mounted RF shielded chassis houses 12 vertical triple input modules, giving flexibility rarely found in a mixer of this type.

Eight input channels with high quality balanced microphone inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors. Every Mic input has an insert for signal processors.

And… every line level line B input can be converted into a phono (record player) channel by simply fitting an optional stereo R.I.A.A. equalized phono pre-amp.

The DR AIRMATE-12 has the usual stereo faders, stereo Aux send and return, monitor master with “follow phones” and a phones output with a split control function.

There is a balance control to continuously adjust the volume between main output and stereo cue signal in DR AIRMATE-12.

In addition, there is a special Radio On-air/production section featuring; Self op switching to automatically cut control room level when the D.J. mic is active; a Clean feed output to also drive

an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be

switched so that the main output, or any cue signal that is selected, can be heard when in the “follow phones” mode.

A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output.

D&R AIRMATE-USB 12 channel triple input radio ON-Air / Production mixer with 2x VoIP and 2x USB interfaces The D&R AIRMATE-12-USB is an 12 fader, 34 input triple input Mixer, capable of accepting: * 10 bal Mic inputs, 3-band EQ and inserts for voice Processors. * 22 stereo line inputs, where every line B input can accept our optional RIAA pre-amp module to work with    turntables. * 2 USB stereo inputs (for radio play-out systems, such as our AIRCAST). * 2 Telephone Hybrids or VoIP channels built in with RJ-11 connectors for phones and landlines. * Fader and On-start on all 12 channels. * ON-AIR light switching built in. * Built in Talkback mic with routing to Clean-feed, Aux and/or Announcer outputs. * Auto Control Room Monitor cut when in DJ mode.

INPUTS.

Mic inputs: bal, 2kOhm, XLR. Phantom: 48 volt.

Noise: - 122 dBr (A-weighted).

Sensitivity: - 70dB min, OdB max.

Insert: -10dBv in/out.

Line inputs: unbal., 10kOhm, Cinch.

Gain: range of 40dB.

Phono inputs: unbal. 47kOhm, 5 mV.

2 Track return: - 10 dBV at 10kOhm.

Aux returns: - 10 dBv at 10kOhm stereo

USB.

Fully compliant with USB 2.0 playback and record mode.

HID Functions: Volume/Mute

TELEPHONE HYBRIDS.

RJ-11 connectors for phone line/dialler

Mix Minus rejection @1kHz -60dB.

OUTPUTS.

Left/Right: + 4 dBu bal. XLR.

Monitor/Aux : + 4dBu unbal. on Cinch.

Clean feed/Announcer: + 4dBu, Jacks. Tape output: -10dBv, unbal. Cinch.

Headphone: 16-600 Ohm, Jack.

Announcer: 16-600 Ohm, Jack.

EQUALIZER.

High: + / -12 dB at 12kHz shelving. Mid: + / -12dB at 1 kHz bell curve.

Low: + / -12dB at 60 Hz bell curve.

OPTIONS:

AES/EBU digital stereo output and AES digital 2 track input, plus existing

analog outputs on 2 jacks.

RIAA pre-amp on line input B for phono cartridges, 60881597

OVERALL

Frequency response: 10 – 60.000Hz.

Distortion: < 0.009% max at 1 kHz.

Start switch: reed relay.

Led bars: 21 segment.

Power Consumption: 30VA

START

Stereo jack connector to internal opto coupler 24volt/50mA max.

The opto coupler switches between tip and ring of the stereo jack

(So tip is shorted to the ring)

MIC ON

Stereo jack connector to internal opto coupler(24volt/50mA max.)

The opto coupler switches between tip and ring of the stereo jack

(So tip is shorted to the ring)

DIMENSIONS

Left-Right rack mountable. (722 mm width)

Front-Back: 356 mm (8HE).

Height: 105 mm.

Space below front panel: 20 mm for table-top. Weight: 14 kg.

For Drop through mounting (on top) cut a hole of 590 × 335 mm.

For Drop through mounting (milling) cut a hole of 622 × 355.15 mm.  with a radius of R=20 and a depth of 2 mm.

SIX MODELS

60890272 AIRMATE-12-USB 2x TELCO EAN Code: 7444704137137

60890241 AIRMATE-12-USB 2x VoIP EAN Code: 7444704137151

60890241 AIRMATE-12-USB 1xTELCO + 1x VoIP EAN Code: 7444704137151

60890243 AIRMATE-12-USB 1xTELCO + 1x BLUETOOTH

EAN Code: 7444704137182

60890246 AIRMATE-12-USB 1xVoIP + 1x BLUETOOTH

EAN Code: 7444704138103

60890248 AIRMATE-12-USB 2x BLUETOOTH

EAN Code: 7444704138127

BW Price Guarantee

(Subject to conditions)

dr $2,724.00
dr $2,724.00
dr $2,724.00
dr$127.00
dr$168.00
dr$29.00

Tech Support

2-Year Warranty

$2,350.00

Related products
STUDIO D&R AIRMATE-12