
DEVA Broadcast DB9000-RX is a professional and highly reliable IP to Audio decoder. Also, it comes with an HTML5-based web server for device management and Ethernet to an RS-232 Redirector. Hence, it enables quick integration of the existing audio systems to the Internet. The device is available with an optional fully digital, DSP-based Stereo & RDS Encoder Module.
It supports this high-class equipment HE-AAC versions 1 and 2, MPEG-1 Layer 3 compressed audio streams, and PCM uncompressed streams. The DEVA Broadcast DB9000-RX is good for a scope of professional audio applications: Broadcast, Internet Radio, Studio to Transmitter Link, and VoIP.
The powerful DSP processor and either digital or analog output signals allow for the decoding process to be accomplished in real-time which makes the device compatible with any online radio system, including Icecast and Shoutcast. Another impressive addition to DB9000-RX features is the low latency Real Time Protocol (RTP) connection support.
Moreover, it comes along with its main IP audio source. DEVA Broadcast DB9000-RX comes with several IP audio sources. It has a built-in MP3/AAC Backup Audio Player for higher stability. Furthermore, the device has a built-in FTP server and 2GB SD card where the audio content for the MP3 Player is recorded. You can manage the backup audio files anytime remotely via any FTP client.
If the audio signal of the main source disappears, the device will switch to the first available IP audio backup source. However, If none of the audio backups are available, then the MP3 Player starts. But when it recovers the main audio signal, DB9000-RX will automatically switch back to it. Depending on your needs, one can change the sequence of the backup audio sources.
The optional digital, DSP-based Stereo & Dynamic RDS Encoder module is a dedicated extension of DB9000-RX. The Encoder Module utilizes one MPX or MPX+RDS output and one RDS or 19kHz Pilot output.
DEVA Broadcast DB9000-RX TYPICAL APPLICATIONS:
1. Audio Transmission over IP-based networks (DB9000-TX or DB90-TX is required at the opposite site)
2. Audio Transmission over IP-based Point-to-Point Wireless Link
3. MultiPoint Audio Transmission over IP-based networks
4. Low delay Real time Audio Transmission
In line with the latest technology, one or more DB9000-RX devices in combination with an encoder, (such as DB9000-TX and DB90-TX, for an instance) offer a full sound solution for long distance wireless needs.
- High Quality HE-AAC (v.1 and v.2) and MPEG-1 Layer 3 Codecs
- 32 kHz, 44.1 and 48 kHz sample rates support
- Support of all standard bitrates and VBR as well
- Shoutcast / Icecast compatible TCP/IP stream client
- Auto switching to another server in the event of a connection loss
- 4 LEDs and Phones output for quick diagnostics
- IP address pronunciation at startup (through the headphones)
- Full Control and easy setup with any web browser
- Entirely Digitally Generated Composite MPX Stereo Signal
- Digital stereo encoder with pre-emphasis, AGC and equalizer
- Fully Dynamic RDS encoder
- UPnP for easy discovery in Local Networks
- Audio Backup on connection or audio loss
- SD Card for Audio Backup Storage
- Ethernet to RS-232 Redirector
- MPX Limiter
Audio decoder | |
---|---|
Decoder: | HE-AAC (v.1 and v.2), MPEG-1 Layer 3 or raw PCM |
Sample rates: | 32, 44.1 and 48 kHz |
Bit rates: | All standard bit rates, including VBR |
Stream client | |
---|---|
Type: | Shoutcast/Icecast compatible TCP/IP client |
Servers: | Up to 3 with auto-switch on failure |
Audio backup | |
---|---|
Trigger: | Connection loss or audio silence |
Threshold: | Adjustable, -90dBFs to 0dBFs |
Trigger time: | Adjustable, 1s to 240s |
Storage: | SD Card, up to 2GB |
Supported encoders: | HE-AAC (v.1 and v.2), MPEG-1 Layer 3 |
Supported file types: | *.MP3, *.AAC, *.M4A, *.M3U |
Playback modes: | Alphabetical ascending and descending, Shuffle, Playlist and Shuffled playlist |
Remote file management: | Build-in FTP server |
Analog audio output | |
---|---|
Connector: | 2 x XLR, Balanced |
Frequency response: | ±0.5dB, 5Hz-20kHz |
Distortion: | <0.01% THD+N |
Level: | +12dBu, user selectable |
Sample rate: | Same as the source stream |
Dynamic range: | >100 dB |
Digital audio output | |
---|---|
Connector: | XLR |
Type: | AES/EBU (IEC 60958) |
Sample rate: | 48 kHz |
Resampling: | Thru build-in sample rate converter |
Stereo encoder (option) | |
---|---|
Type: | Fully DSP stereo encoding |
Pre-emphasis: | 0, 50, 75µs |
AGC: | 5 presets, 2 user defined |
Equalizer: | 3-Band, ±12dB range |
Stereo separation: | >55dB (typically >60dB) |
Phase Adjust: | Pilot, L-R, RDS |
Injection Levels Adjust: | Pilot, RDS |
Output Connector: | BNC, Unbalanced |
Output Level Adjust: | Digitally, up to 0dBu |
Composite MPX Limiter: | 6 presets, 3 user defined |
RDS encoder (option) | |
---|---|
Supported RDS Applications: | PI, PS, Dynamic PS AF, RT, TP, TA, DI, M/S, PIN, PTY, PTYN |
Configuration: | Web interface |
Automation control: | Remote TCP console |
Output Connector: | BNC, Unbalanced |
Output Level Adjust: | Digitally, up to -6dBu |
Phones audio output | |
---|---|
Connector: | 1/4" (6.3mm) Phone Jack, Stereo |
Type: | Headphones |
User interface | |
---|---|
Indicators: | 4 LEDs on front panel, 2 LEDs on rear panel |
Web interface: | Full control and status information |
RS-232 | |
---|---|
Type: | TCP/IP to RS-232 Redirector |
Connector: | DB-9 |
Baud rates: | 9600 to 115200 |
Password protection: | Yes |
Network | |
---|---|
Connector: | RJ-45 |
Type: | Ethernet |
Device discovery: | UPnP support |
Operating conditions | |
---|---|
Temperature: | 10°C - 45°C |
Humidity: | < 75%, non-condensing |
Power requirements | |
---|---|
Voltage: | 115/230V AC (internal switch), 18VA |
Connector: | IEC320, rear panel |
Size and Weight | |
---|---|
Dimensions (W;H;D): | 485 x 44 x 180 mm |
Shipping Weight: | 540 x 115 x 300 mm / 2.6kg |
BW Price Guarantee
(Subject to conditions)
Tech Support

2-Year Warranty

$1,449.00