DB Mozart 500
500W FM Transmitter
DB Mozart 500 – the latest Audio excellence in FM Broadcasting
FM transmitter – Radio transmitter : the new Mozart FM Transmitter – Exciter Series is the latest audio excellence in the FM Broadcasting industry with revolutionary Audio & RF technology.
MAIN CHARACTERISTICS:
– The GREEN RF™ technology, combined with new 65:1 devices, is the latest evolution of the world-famous patented COLD-FET™ technology applied on DB’s transmitters.
– FM transmitter Low maintenance costs thanks to the easy access to all components, external cooling air filters, very high MTBF for RF and power supply modules.
– Compact design and low weight to reduce transportation costs and simplify logistics.
– FM transmitter High frequency stability in short and long terms assured by Digital Phase Locked Loop circuit with low drift VCTCXO.
– FM transmitter Complete WEB SERVER SNMP, GSM or SMS remote control, available as option.
– FM transmitter Complete remote management via WiFi with WiFi Touch, available as option.
– FM transmitter External reference oscillator, available as option: 10 MHz.
– Frequency Agile Broadband, settable directly from the LCD front panel with 10 KHz steps without need for tuning tools.
– Meets or exceeds all international standards for safety and electrical specifications.
- FM transmitter MSE™: Magnetic Sound Enhancer is a magnetic barrier that protects the VCO, the heart of FM modulator, and increases sound quality.
- Stereo Generator: high performance built-in digital stereo coder provides separation typical > 65dB.
- Signal/noise ratio >80dB assures the highest audio quality.
- Input sensitivity and output deviation adjustable with high precision of 0,05dB through front panel or remotely by web interface.
- FM transmitter level and phase of the pilot tone adjustable from the front panel and Web interface.
- AES/EBU digital stereo audio interface available as option.
- Powerful modulation limiter keeps the maximum frequency deviation within international requirements to avoid over-modulation and adjacent channels interference. Limiter levels can be set from the front panel.
- FM transmitter Switch-mode power supply with power factor control. Highly efficient and widely over-rated power supply modules insure low heating, low AC power consumption and superior reliability. The power factor control circuitry meets the international requirements for mains network disturbances.
- FM transmitter High efficiency cooling system. Thanks to the air cooling system, the heat-sink temperature can rise only about 10°C above ambient temperature. This guarantees the proper functioning even in sites with extreme climate conditions and high temperature.
General
- Frequency range: 87.5 to 108 MHz adjustable with 10kHz step
- Output impedance: 50 Ω
- Output connectors: N from 30W up to 500W
- DIN 7/16 for 1kW
- EIA 7/8” for 2kW, 3kW, 3.5 kW and 6kW
- Deviation capability: ±75 kHz, up to ±200 kHz with distortion < 0.5%
- Short term stability: ± 1 ppm from -5 to +45 °C
- RF harmonics: Exceeds CCIR/FCC requirements
- RF spurious: E xceeds CCIR/FCC requirements
- Pre-emphasis: 0, 25, 50, 75 us (selectable)
- Modulation monitoring: BNC connector
- Pilot tone: Phase and Amplitude adjustable from display and WEB interface
- Log file: Up to 200 dated events saved in the transmitter memory, accessible from display and WEB interface
Audio Inputs
- Modulating input signal:Mono, Stereo (Left, Right, Left + Right), Encoded stereo (MPX), SCA, RDS, AUX, Digital AES/EBU
- Input sensitivity adjustment:With 0,05dB steps by front panel display interface or by WEB interface
- Limiter:It can be enabled/disabled and adjusted from 30 kHz to 180 kHz by front panel display and WEB interface
- Internal RDS coder:Synchronized with the 19kHz pilot of the internal stereo coder or the 19kHz pilot of an external MPX signal
Mono
- Audio input levels for +/- 75 kHz deviation:Adjustable from -9 to +18 dBu
- Audio response:±0.3 dB (30 Hz to 15 kHz)
- THD+N on encoded channels:< 0.06% ( typ. 0.03% ) (30 Hz to 15 kHz)
- Audio Impedance:600Ω Balanced
- Audio connector:XLR
Stereo
- Audio input levels for +/- 75 kHz deviation:Adjustable from -9 to +18 dBu
- Audio response:±0.3 dB (30 Hz to 15 kHz)
- THD+N on encoded channels:< 0.03% (30 Hz to 15 kHz)
- Audio Impedance:10 kΩ Unbalanced or 600Ω Balanced
- Audio connector:XLR (Left & Right)
MPX (External coder)
- Audio input levels for +/- 75 kHz deviation:Adjustable from -6 to +6 dBu or from +6 to +18 dBu (selectable at order)
- THD+N on encoded channels:< 0.03% (30 Hz to 100 kHz)
- Audio Impedance:> 5 kΩ Unbalanced
- Audio connector:BNC
RDS/SCA/AUX (with separated connectors)
- Audio input levels for +/- 75 kHz deviation:Adjustable from -19.5 to +7.5 dBu
- Audio Impedance:2 kΩ (others on request) Unbalanced
- Audio connector:BNC
AES/EBU
- Audio input levels for +/- 75 kHz deviation:Adjustable from -15 to 0 dBFS
- Audio Impedance:110 Ω
- Audio connector:XLR
AC Power Requirements
- AC supply voltage:115 / 230 VAC ± 15%, single-phase
- AC supply frequency:50 Hz or 60 Hz, ±5%
- Power factor:> 0.9
Environment
- Cooling:Forced air
- Service:Continuous 24/24h
- Operating temperature:-5°C to +45°C
- Derate 3°C per 500 m above 2000 mt asl
- Relative humidity:Up to 95%
BW Price Guarantee
(Subject to conditions)
Tech Support
2-Year Warranty
