Up to 40 FM and AM stations may be stored.
RDS ( Radio Data System) Display.
Retains presets when power is off.
Large LCD digital display.
Auto Search and Store function.
Standard 1 space EIA rack chassis.
Headphone output, XLR outputs, and Signal Strength meter.
Internal Monitor Amplifiers: 3W CUE monitor with internal speaker. 2 Stereo Monitor outputs; Control Room & Studio, with Muting Relays (line level).
Optional MIC module model 2612, 160mm wide, with 3 MIC with processing facilities. 4 band EQ, 80 Hz and 10 kHz shelving, 160 Hz & 5 kHz bell shaped; +/- 14 dB action. Expander Gate to eliminate backgound noise. Audio Compressor, 20 dB action. Iluminated switchs for EQ and Compressor-Expander
Digital Control Bus
One Start Devices output for each input module, to start external devices when open each channel fader. Out at minijack 1/8" // Ring = A channel (left side) Tip= B channel (Rigth side) Open collector OFF = Open Manages 0-24 V DC @ 100 mA
20-20.000 Hz +/- 0.25 dB (LIN or MIC to PGM)
MIC input, EIN=-132 dBu/150 ohms
LINE input, S/N > 95 dBA at PGM output
From Line to PGM > 110dBA (Better than CD quality)
PGM-AUD-SEND > 90 dBA @30-10.000 Hz
L-R & R-L > 80 dBA @ 1khz
From LINE to PGM out < 0.01 % THD @30-15.000 Hz
From MIC to PGM out < 0.01 % THD @30-15.000 Hz
From Line to PGM, < 2º L&R @50-10.000 Hz
Below 0.2 dB error L/R in fader range 0 to 40 dB
3 Hybrid inputs, 2 for phone lines and one for cellular phone at 4 wires.
It includes a mini-PBX with Ringer, Line attention with free hands operation, and Line Transfer.
Included Talkback MIC, with Audio Limiter. Noise Cancelled PZM type / Outputs to Phone Line Hybrid and Studio Speaker with AutoSwitch (AutoSwitch allows one-touch Studio communication)
2600XL: 4 digitally controlled VUmeters 24 steps of 1 dB, DUAL type (RMS & Peak) for PGM & AUD. One Timer/Clock and one
Stereo Phase Vector display
Timer /Clock Option
Timer counts minutes: seconds during on-air MIC in order to avoid excessive speaker on-air time When the Timer is off, a standard clock is activated
ON-AIR signal output (turns on when MIC is open) 12 VDC @ 0, 3 amp
Start external devices
One Start Devices output for each input module, to start external devices when open each channel fader. Out at minijack 1/8" // Ring = A channel (left side) Tip= B channel (Rigth side) Open collector OFF= Open. Manages 0-24 VDC @ 100 mA. This allows to control Virtual Rack processors and start audio devices.
110-127 V / 190-240V, with switch, 50/60 hz, 80 VA
Dimensions & Weight
XL model: 840 wide x 585 depth x 135 height – Weight 15 Kg
BOX : 90 x 65 x 25 cm, 2 Kg
2600XD: 845mm wide, 635mm depth, 125 mm height – Weight 15 Kg
Signal to noise referred at deviation of 75KHz
Suppression of 38KHz
Spurious suppression outside band
in according to ETS 300-384
ECO LINE – HIGH EFFICIENCY TRANSMITTER
Wideband circuits amplifiers with LD-Mos technology
Built-in exciter with digital frequency synthesiser
Stereo encoder, RDS, AES-ABU and Audio change-over built-in
Automatic fold-back ROS protection
Fold-back temperature protection
LCD display to check all operating parameters
6x8000W amplifier in only one heat-sink for highest reliability
3xSwitching-mode Power Supply – Efficiency >95%
Sealed duct cooling air with blowers
Easy removable blowers
Harmonics filter & directional coupler built-in 3 unit 19” standard rack
GSM Telemetry & TCP/IP Webserver
Headphone jack on front panel