SUONO ESVA250 €1,625.00
Back to products
Label BKV/1N €205.00
Broadcasters Warehouse - suono esva500 fm transmitter
Click to enlarge

SUONO ESVA500

SKU: 109585

€2,150.00

ESVA500
€2,150.00
RDS Encoder option
€140.00

Description

SUONO ESVA500

The SUONO ESVA500 is a 500W FM Transmitter (Mono/MPX), which is made with the most modern technology available to deliver maximum performance at minimum cost.

 

Technical Facts:

  • FREQUENCY RANGE: 87.5÷108MHz (76÷88MHz on request)
  • MODULATION: FM
  • EMISSION CLASS: F3E
  • VCO TUNING: 25MHz
  • FREQUENCY STABILITY: ± 2.5 ppm
  • SYNTHESIZER STEP:10KHz
  • POWER OUTPUT: 0 ÷ 525 Watts
  • SPURIOUS EMISSION: < – 80 dB or better
  • HARMONIC EMISSION: <-70 dB
  • STEREO SEPARATION: >55dB @ 1KHz
  • DISTORTION:< 0.1 % (Typ. 0.06%) @ 1KHz
  • BASE BAND: 30 Hz ÷ 60 kHz within 0.15 dB
  • UNWEIGHTED S/N RATIO:>80 dB (30Hz ÷ 15KHz, 50 μs RMS)
  • ASYNCHRONOUS AM S/N Ratio: > 70 dB, Ref. 100% AM 400Hz
  • SYNCHRONOUS AM S/N Ratio: > 65 dB with FM @ 75KHz @400Hz
  • PRE-EMPHASIS: 50 OR 75 μS Internally selectable
  • RF OUT CONNECTOR: NF 50 Ohm
  • MPX INPUT CONNECTOR: BNC-F
  • MPX INPUT IMPEDANCE: 2KOhm
  • SCA INPUT CONNECTOR: 3 BNC-F
  • COOLING: Forced air by two brushless fans
  • OP.TEMPERATURE RANGE:- 10 ÷ +45 °C
  • MAXIMUM HUMIDITY: 90 %
  • AC SUPPLY: 100 ÷ 240 VAC – 47 ÷ 63 Hz
  • DIMENSION: 2 unit rack 19″, 405 mm depth
  • WEIGHT: 15 Kg

Related Products

TEM Opera plus 2kW

In stock

€6,270.00
Select options
Weight 35 kg
Dimensions 74 × 62 × 40 cm
Product can be split into multiple boxes

0
video

0
Ship Separately

0
specification

General Specification

Operating voltage
230VAC ±15% min

Cooling
Forced Air

Line power
< 2800VA

Operational temperature range
-5° to 50°C

Storage temperature range
-20° to 60°C

Output RF connector
7/16”

Monitor RF connector
BNC

Dimensions
485×133, 2x625mm

Weight
16 kg

Radio Frequency

Frequency range
87.5 to 108MHz

Frequency setting
in 10KHz or 100 KHz steps

Setting mode
By keys on the front panel/Remote

Frequency stability
< ±500Hz/year

Frequency generation
PLL synthesizer

Modulation type
direct VCO frequency modul. F3

Nominal frequency deviation
±75KHz

Deviation linearity in all freq. range
±5KHz

RF output power
2000 W ± 1 d B

Harmonics emission
<-70dBc

Spurious emission
<-95dBc

Modulation Capability

MONO (left and right)
30Hz to 15KHz

STEREO (L-R & AES-EBU)
30Hz to 53KHz

SCA + RDS
30Hz to 100KHz

Composite
Mono or Stereo + SCA + RDS

MPX Characteristics

Signal input
MPX

Composite Input impedance
10Kohm unbalanced

Input connector
BNC

Input level
Adjustable (Front/Remote)

Audio freq. response (30Hz to 60KHz)
< 0, 5 dB

Modulation distortion
<0.2%

Signal to noise ratio
>75dB

Stereo Characteristics

Signal inputs
Left or Right – AES-EBU

Input impedance
600ohm (bal.) or 10k ohm

Input connectors
Canon XLR

Unbalance rejection
>40dB

Input leve
Adjustable (Front/Remote)

Pre-emphasis
75 or 50uS

Audio frequency response (30Hz to 15KHz)
<0.25dB

Audio frequency response (19KHz to 100KHz)
>50dB

Cross-talk between left and right channel
>50dB

Distortion at frequency deviation of 75KHz
<0.1%

Signal to noise referred at deviation of 75KHz
>75dB

Suppression of 38KHz
>50dB

Spurious suppression outside band
in according to ETS 300-384
features

ECO LINE – HIGH EFFICIENCY TRANSMITTER
Wideband circuits amplifiers with LD-Mos technology
Built-in exciter with digital frequency synthesiser
Stereo encoder, RDS, AES-ABU and Audio change-over built-in
Automatic fold-back ROS protection
Fold-back temperature protection
LCD display to check all operating parameters
2x1250W amplifier in only one heat-sink for highest reliability
Switching-mode Power Supply – Efficiency >95%
Sealed duct cooling air with blowers
Easy removable blowers
Harmonics filter & directional coupler built-in 3 unit 19” standard rack
GSM Telemetry & TCP/IP Webserver
Headphone jack on front panel
Color

Black
sielco EXC1000GX fronte logo Sie

Sielco EXC 1000GX

In stock

€3,695.00
Select options
Weight 13.5 kg
Dimensions 49.00 × 90.00 × 52.00 cm
Color

Black
specification

Technical Data:

Frequency range

from 87, 5 to 108 MHz

FM modulation

75 KHz peak deviation (adjustable)

Audio and Mpx input level

from -3, 5 to +12, 5 dBm @ 75 KHz deviation

Auxiliary input channel level
SCA
from -12, 5 to +3, 5 dBm @ 7, 5 KHz deviation

RDS
from -24 to -8 dBm @ 2 KHz deviation

Modulation distortion
75 KHz deviation
<0.05%, 0.02% typical

S/N ratio, mono
30÷20000Hz
>76 dB, 80 typical

CCIR
>75 dB, 79 typical

S/N ratio, stereo
30÷20000Hz
>72 dB, 77 typical

CCIR
>68 dB, 72 typical

Audio channels frequency response
30÷15000 Hz
±0.1 dB

Pre-emphasis time constant

25/50/75 μs selectable

Rated RF output power

500W, 1000W, 1500W

Transmitter tuning steps

10/100 KHz

Output power ALC stability

±3%

Harmonic and spurious emissions

<70dB (harmonic), <80 dBc (spurious)

RF output connector

7/16

Power supply
Single phase
230 VAc ± 15%

Three phase
N.A.

Total consumption at rated RF power

<830W (EXC500GT), <2400W (EXC1500GT)

Operative temperature range
suggested
from 0 to 35 °C

extreme
from -10 to +50 °C max (with derating)

Relative humidity

up to 95% not condensing

Dimensions (WxHxD)

483x88x585 mm

Weight

12kg
Ship Separately

0
Product can be split into multiple boxes

0
video

0

HFPrints Cam2300

In stock

Call for Price
Add to Cart
Placeholder

Eurotel VHF 5 Watt

In stock

€0.00
Add to Cart
Sielco EXC300GX

Sielco EXC 300GX

In stock

€1,974.00
Select options

Sonifex S2 Broadcast Mixer

In stock

Call for Price
Add to Cart
Weight 2 kg
features

Assigning an Input Channel to an Output Bus – Switches at the top of the channel are used to select the output group routing, to either Program, Audition, or both output busses. Selecting the PGM and/or AUD buttons routes the channel audio to the PGM and/or AUD mix busses. The buttons illuminate green to indicate the routing status.
Changing the Input Level – Coarse gain is set using pre-set potentiometers on the channel circuit board which allow unbalanced inputs to be used on mono and stereo line inputs. The front panel TRIM control allows fine gain of ±12dB.
Changing the Signal Pan, or Balance – The BAL/PAN control is used on mono channels to pan the mono input signal in the stereo image and on stereo channels to balance the stereo image.
CUE/PFL (Pre Fade Listen) – Selecting the CUE/PFL button routes the pre-fader input signal to the monitoring system where the signal can be heard via headphones and/or loudspeakers. The button lights green when CUE/PFL is active and a jumper option is available to cancel the CUE/PFL selection when the fader is raised. This button works with both a momentary and latched operation – if held down, the selection is cancelled on release, otherwise the button is alternate action.
Fader Start & ON Button Control – The ON button works in conjunction with the 100mm long-throw carbon fader and is used to control channel remotes (e.g. starting a CD player), routing and timers, etc. When unlit, the channel is off. Flashing red indicates that the channel has been selected to ON but not routed to either PGM or AUD. Steady red indicates that the channel is ON and “armed”, ready for the fader to be raised. Raising the fader changes the illumination to green indicating that the channel is live. Alternatively, with the button unlit the fader may be raised and the channel can be operated simply by selecting ON. The illumination in this case toggles between unlit (channel OFF) and green (channel ON).
Programmable Button Settings – To make the S2 modules as flexible as possible, every button on each channel can be set to a number of different modes to aid the use of the mixer and allow for extra functionality. Each button can be set to either operate manually, be permanently on, or permanently disabled. Also, the ON button can be configured to operate in a number of modes, altering remote start functions, and the channel ON function can be controlled remotely by automation playout systems, such as RCS® or VCS.
Scribble Pad – A scribble pad is provided at the bottom of the channel for user labelling of the channel function.
specification

Technical Specification For S2

Input/Output Impedances

Mic Input:
> 1k5Ω electronically balanced

Mono Line Input:
> 20kΩ electronically balanced

Stereo Line Input:
> 20kΩ electronically balanced

PGM & AUD Output:
< 75Ω electronically balanced

Mono Output:
< 75Ω electronically balanced

Monitor Outputs:
< 75Ω unbalanced

AES Input/Output:
110Ω

S/PDIF Input/Output:
75Ω

BNC Wordclock input:
50Ω

Input/Output Gain Range

Mic Input:
Preset pot +13dB to +66dB ref -50dBu, TRIM pot ±12dB

Mono Line Input:
Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB

Stereo Line Input:
Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB

Telco Input:
Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB

Telco Output:
Preset pot -6dB to +4dB ref 0dBu

Mix Minus Input:
Preset pot -6dB to +10dB ref 0dBu, TRIM pot ±12dB

Mix Minus Output:
Preset pot -3dB to +3dB ref 0dBu

Digital Input:
0dBFS = +12dBu on input; TRIM pot ±12dB allowing 0dBu to +24dBu

Digital Output:
0dBFS = +18dBu

Frequency Response

Mic Input:
40Hz to 20kHz, -1dB, +0dB (-3dB at 130Hz with HPF in)

Line Inputs:
20Hz to 20kHz, – 0.5dB, +0dB

RIAA Input:
30Hz to 16kHz ±1.5dB RIAA equalised

Noise (20Hz to 20kHz)

Mic Input E.I.N.:
-129dB with 150Ω source

Stereo Inputs (fader down, no routing):
-89dB ref 0dB

Stereo Inputs (fader down, one channel routed):
-89dB

Stereo Inputs (unity gain, no routing):
-89dB

Stereo Inputs (unity gain, one channel routed):
-86dB

Stereo Inputs (unity gain, two channels routed):
-83dB

Distortion

Total Harmonic Distortion:
0.015% at 1kHz, 0dB

0.025% at 10kHz, 0dB

Crosstalk

Inter-channel:
< -90dBu

Stereo:
-90dBu at 1kHz

Equalisation

LF Shelving at 100Hz:
±7dB

HF Shelving at 6.5kHz:
±7dB

Range

Pan Range:
off/-3dB centre/off

Balance Range:
±6dB

Common Mode Rejection Ratio

Mic Input:
> 100dB at 70dB gain

Digital I/O

Sync Input Sample Rate:
30kHz – 100kHz

Output Sample Rates (Using Onboard Clock):
32kHz, 44.1kHz, 48kHz, & 96kHz

Output Sample Width:
16, 20, 24 bit (24 bit on V2 ODA/ODP)

Output

Headphone Output Load:
>45Ω, 400Ω recommended

Maximum Output (Analogue):
+26dBu balanced into 2kΩ or greater

Power

Power (S2-PSU):
Filtered IEC, switchable 115V, 230V, fused, 210W max.

Dimensions (S2-PSU):
48cm (W) x 24.3cm (D) x 8.8cm (H)

(Raw):
19” (W) x 10” (D) x 3.5” (H)

Dimensions (S2-PSU):
51cm (W) x 41.5cm (D) x 17cm (H)

(Boxed):
20” (W) x 16.3” (D) x 6.7” (H)

Weight (S2-PSU):
Nett: 6kg Gross: 7.8kg

Nett: 13.2lbs Gross: 17lbs

Dimensions (S2-PSUS):
48cm (W) x 23cm (D) x 4.4cm (H)

(Raw):
19” (W) x 9” (D) x 1.7” (H)

Dimensions (S2-PSUS):
55cm (W) x 39.3cm (D) x 8.5cm (H)

(Boxed):
21.6” (W) x 15.5” (D) x 3.4” (H)

Weight (S2-PSUS):
Nett: 1.58kg Gross: 2kg

Nett: 3.5lbs Gross: 4.4lbs
Ship Separately

0
Product can be split into multiple boxes

0