Back to products

Broadcasters Warehouse - dr airmate 12 broadcast

Broadcasters Warehouse - d r airmate 12 usb backpanel

Click to enlarge

D&R AIRMATE-12 USB

Name: Buy D&R AIRMATE-12 USB I Broadcasterswarehouse.com
SKU: 100299
Availability: InStock

SKU: 100299

€2,475.00

AIRMATE-12-USB 2 x Telco

€2,475.00

AIRMATE-12-USB 2 x VoIP

€2,475.00

AIRMATE-12-USB Telco + VoIP

€2,475.00

AIRMATE-12-USB Telco + Bluetooth

€2,495.00

AIRMATE-12-USB VoIP + Bluetooth

€2,495.00

AIRMATE-12-USB 2 x Bluetooth

€2,495.00

RIAA Pre-Amp option

€25.00

AES-EBU option

€130.00

AIRMATE-USB Spare Parts Kit

€150.00

Description

D&R AIRMATE-12 USB

the most personal options,
inside an analog radio mixer

We designed the D&R AIRMATE-12 USB to fulfil the requirements for a high grade radio production mixer. This console is the reliable workhorse for the self-op production D.J. that needs Hybrids and USB connection to a PC, (e.g. for streaming to the web) plus options of a VoIP or Bluetooth channel and an AES output.

A heavy duty 19″ rack mounted RF shielded chassis houses 12 vertical triple input modules, giving flexibility rarely found in a mixer of this type.

Eight input channels with high quality balanced microphone inputs on XLR and two stereo line level inputs on Cinch (RCA) connectors. Every Mic input has an insert for signal processors.

And… every line level line B input can be converted into a phono (record player) channel by simply fitting an optional stereo R.I.A.A. equalized phono pre-amp.

The Airmate-12 has the usual stereo faders, stereo Aux send and return, monitor master with “follow phones” and a phones output with a split control function.

There is a balance control to continuously adjust the volume between main output and stereo Cue signal.

In addition, there is a special Radio On-air/production section featuring; Selfop switching to automatically cut control room level when the D.J. mic is active; a Clean feed output to also drive

an external Telephone Hybrid for talk shows and interviews, if you need more Hybrid channels than the 2 built in ones; a special announcer output that normally follows main output but can be

switched so that the main output, or any cue signal that is selected, can be heard when in the “follow phones” mode.

A large Talkback switch activates the built-in electret talkback microphone for easy communication with the Clean-feed output, Aux output and/or Announcer output.

Specifications

INPUTS.

Mic inputs: bal, 2kOhm, XLR. Phantom: 48 volt.

Noise: – 122 dBr (A-weighted).

Sensitivity: – 70dB min, OdB max.

Insert: -10dBv in/out.

Line inputs: unbal., 10kOhm, Cinch.

Gain: range of 40dB.

Phono inputs: unbal. 47kOhm, 5 mV.

2 Track return: – 10 dBV at 10kOhm.

Aux returns: – 10 dBv at 10kOhm stereo

USB.

Fully compliant with USB 2.0 playback and record mode.

HID Functions: Volume/Mute

TELEPHONE HYBRIDS.

RJ-11 connectors for phone line/dialler

Mix Minus rejection @1kHz -60dB.

OUTPUTS.

Left/Right: + 4 dBu bal. XLR.

Monitor/Aux : + 4dBu unbal. on Cinch.

Clean feed/Announcer: + 4dBu, Jacks. Tape output: -10dBv, unbal. Cinch.

Headphone: 16-600 Ohm, Jack.

Announcer: 16-600 Ohm, Jack.

EQUALIZER.

High: + / -12 dB at 12kHz shelving. Mid: + / -12dB at 1 kHz bell curve.

Low: + / -12dB at 60 Hz bell curve.

OPTIONS:

AES/EBU digital stereo output and AES digital 2 track input plus existing

analog outputs on 2 jacks.

RIAA pre-amp online input B for phono cartridges, 60881597

OVERALL

Frequency response: 10 – 60.000Hz.

Distortion: < 0.009% max at 1 kHz.

Start switch: reed relay.

Ledbars: 21 segment.

Power Consumption: 30VA

START
Stereo jack connector to internal opto coupler 24volt/50mA max.)

The opto coupler switches between tip and ring of the stereo jack

(So tip is shorted to the ring)

MIC ON

Stereo jack connector to internal opto coupler(24volt/50mA max.)

The opto coupler switches between tip and ring of the stereo jack

(So tip is shorted to the ring)

DIMENSIONS

Left-Right rack mountable. (722mm width)

Front-Back: 356mm (8HE).

Height: 105mm.

Space below front panel: 20mm for table top. Weight: 14 kg.

For Drop through mounting (on top) cut a hole of 590 x 335 mm.

For Drop through mounting (milling) cut a hole of 622 x 355.15 mm. with a radius of R=20 and a depth of 2mm

Related Products

AudioScience ASI5720

In stock

Call for Price

Add to Cart

RVR TEX150LCD/S

In stock

€1,895.00

Select options

Weight	10 kg
Dimensions	55 × 50 × 10 cm
features	On the front panel, by means a user-friendly graphic interface, all the diagnostic and control parameters are displayed (frequency, output power, measurement, etc…). Adjustable power output from 0 to 150 W with any VSWR conditions, thanks to FOLD-BACK control of both forward and reflected power. Power supply multi-voltage from 80 to 260 V directly without selector. Meets or exceeds all FCC and CCIR requirements. Low cost with high performance. Composed of only 4 modules easily replaceable, allowing the realignment of equipment with almost total absence of adjustments. SMD technology circuits for maximum reliability and minimum encumbrance with optimum signal routing. Available with 2 SCA/RDS input connectors. Main parameters available also on terminal board for remote control. Built-in stereo coder with high performance.
Ship Separately	0
Product can be split into multiple boxes	0