Barix Exstreamer 205
IP Audio decoder with S/PDIF and 2×25W amplified output, microSD.
Support of Internet Radio (AACplus, MP3, shoutcast, TCP streaming) and VoIP (SIP, RTP) codecs and protocols.
The Exstreamer 20x devices decode IP Audio streams and play out the received Audio signal via a built-in amplifier to 8 Ohm speakers. Supporting many protocols, encoding methods and application specific firmware, the products can be used for Broadcast, Internet Radio as well as VoIP applications. With a local analog input, the Exstreamer 205 can also be used as an IP controlled, high quality amplifier.
Technical Specifications
Electrical24 VDC, 70 Watt max. on 2.1 mm barrel connector 24 VDC Power supply (100-240 VAC) included
Ethernet10/100Mbps auto, RJ-45 connector with integrated Link/Activity LED Protocols: TCP/IP, UDP, RTP, SIP, DHCP,
|
Analog Output2 × 25 W (RMS @ 8 Ohm) speaker outputs, 3.5 mm (1/8 inch) headphone jack, S/P DIF out (optical), Output level software controllable Frequency response (-3 dB) 19 Hz .. 20 kHz * Dynamic range 94 dB SNR/THD -94 dB, <0.05%)
Audio formatsMP3 CBR/VBR, up to 320 kbps, 8.48 kHz sample freq. AAC-HE (AAC, AAC plus, AAC plus V2) WMA (up to version 9), Ogg Vorbis PCM linear 16bit @8, 16, 22.05, 24, 32, 44.1, 48 kHz G.711, uLaw, aLaw (sample rates same as PCM) |
RS-232 Interface300.230‘400 Baud asynchronous, for serial tunnelling or local control, 12 VDC supply output for external devices (100 mA max.)
IR InterfaceBuilt-in IR receiver, IR remote control included, Optional external IR receiver via serial port (IR Kit)
MechanicalAluminium case, 460g rack and wall mountable using accessories |
Dimensions (W × H × D)108 × 38 × 125 mm (4.25 × 1.5 × 4.92 inch)
Model comparisonModel 200 Speaker output 2 × 25 Watt on 8 Ohm, Memory USB Model 205 Speaker output 2 × 25 Watt on 8 Ohm, Memory microSD, Line in
MTBFAccording MIL217F at 25 °C Exstreamer 200 min. 460 000h Exstreamer 205 min. 410 000h
* depends on used codec, best results @48kHz PCM |
