|
Technical Specification For RB-DS2
A/D Specification
Maximum Input Level:
+28dBu
Input Impedance:
> 10kΩ bridging
Analogue & Digital Input Levels:
Selectable +12dBu, +18dBu, +24dBu for FSD
Analogue Pre-set Input Gain Range:
Adjustable 3dB loss to 3dB gain (L & R adjust)
Signal to Noise:
Better than -101dBFS (RMS A-weighted at 24bit)
Dynamic Range:
> 110dB
Distortion & Noise:
> 96dB THD + N at 1kHz
D/A Specification
Maximum Output Level:
+24dBu
Output Impedance:
< 50Ω
Dynamic Range:
> 100dB
Analogue Output Gain Range:
Selectable -6dBu to +24dBu output level, ref FSD
Sampling Frequency:
Selectable 32kHz, 44.1kHz, 48kHz 64kHz, 88.2kHz or 96kHz
Sample Width:
Selectable 16bit or 24bit
Channels:
Stereo or dual mono
Format (Fields & Frames):
PAL, NTSC
Delay Units:
Samples, fields, frames, milliseconds, hh:mm:ss, (with CF expansion)
Maximum Delay:
10.5 seconds @ 96kHz, 24bit, stereo (excluding memory expansion)
Rear Panel Connections
Analogue Inputs:
2 x XLR 3 pin female (balanced) (L & R)
Analogue Outputs:
2 x XLR 3 pin male (balanced) (L & R)
Digital Inputs:
1 x AES/EBU XLR 3 pin female
Digital Outputs:
1 x AES/EBU XLR 3 pin male
Remote I/O Port:
15-way ‘D’-type plug, 8 GPI inputs, 4 GPI outputs
Serial Comms Port:
9-way ‘D’-type plug
Memory Expansion:
Internal Compact Flash™ storage card supporting up to 2GB. CF cards must be PIO Type 4 or higher.
Mains Input:
Filtered IEC, continuously rated 85-264 VAC, 47-63Hz, fused, 60W peak, 30W average
Fuse Rating:
Anti-surge fuse 2A 20 x 5mm
Front Panel Controls
Display:
Vacuum fluorescent display
System Navigation:
Rotary selector with integral push-switch
Audio Bypass:
Via push-button
Equipment Type
RB-DS2:
Stereo delay synchroniser & time-zone delay
Physical Specification
Dimensions (Raw):
48cm (W) x 15.8cm (D *) x 4.2cm (H) (1U)
19” (W) x 6.2” (D*) x 1.7” (H) (1U)
Dimensions (Boxed):
59cm (W) x 27.5cm (D*) x 11cm (H)
23.2” (W) x 10.8” (D*) x 4.3” (H)
Weight
Nett: 1.6kg Gross: 2.3kg
Nett: 3.5lbs Gross: 4.8lbs
|
