TRANSMISSION - Broadcasters Warehouse

Sielco EXC 3500GX

In stock

€11,995.00

Weight	30 kg
Dimensions	62 × 49 × 18 cm
Product can be split into multiple boxes	0
Ship Separately	0
specification	RF RF Power 4000W Connector 7/8 EIA 50 Ohm Harmonics >70 dBc Spurious >80 dBc VSWR fold back above 2.1 Frequency 87.5 – 108 MHz Frequency 10/100KHz steps Frequency selection internal switches or menu system Frequency control type type dual speed Phase locked loop Frequency Stability +/- 200 Hz (fine adjustment available) MPX input BNC MPX input response +/- 0.3 dB 5 Hz to 100 kHz MPX input level -10db to +10dB (adjustable) PSU Efficiency 87% PA Board Efficiency 80% Synchronous AM Noise 0.31% (at normal deviation) Asynchronouse AM Noise 0.18% (at centre frequency of 97.7MHz) STEREO Subcarrier Generation microprocessor generated (oversampled) Pilot 19kHz +/- 1 Hz (adjustable) Pilot generation microprocessor generated (oversampled) Output level (BNC) 0dB 15 kHz filtering >40dB at 19kHz 15kHz overshoot filter clipping Clipping Selectable on or off Spurious >80 kHz >50dBr Spurious>160 kHz >80dBr Stereo separation >50dB (20Hz-15kHz) LIMITER Audio input levels -10dB – +18dB for limiting Audio input connectors XLR balanced (RF shielded) Input CMRR >60dB Audio distortion <.1% at limiting 1 kHz (clarity mode) Frequency response 20 Hz to 20kHz +/- 0.5dB (0 us Pre emphasis) Limiter control range >22dB (0 us pre emphasis) Input impedance 10k Ohm Pre emphasis 0, 50 and 75 uS Process modes clarity and loud Clipping on or off Other Control system Front Panel Controls & Alphanumeric Display External control/monitor 15 way D-type Size 483mm x 177mm x 650mm Weight 30Kg Voltage input 85-260 VAC (50-60Hz) Total Power Consumption at rated power 6400W Power connector IEC, FUSED and switchable Switched mode supplies approvals UL/TUV/CE
features	• Professional performance, Extreme compactness, reliability and lightness easy maintenance. • High gain final power amplifier stage with very low power consumption• Fully microprocessor-controlled, menu-digital interface for diagnosis and monitoring of all parameters displayed on the LCD.• APC (automatic power control) and foldback protection, safe and reliable operation in every environmental condition. • Manufactured using the latest technologies for safe operation and easy maintenance. • Works perfectly with all Siel telemetry systems

Belar LP-1

In stock

Call for Price

Add to Cart

Product can be split into multiple boxes	0
Ship Separately	0
specification	Model LP-1 Shielded Loop Antenna Frequency Range 530 kHz to 1610 kHz in 3 bands Diameter 33" Mounting 1/2" NPT Connector BNC Attenuation 30 dB Permissible Wind Load 150 mph, 100 mph with 3/4" ice

Product can be split into multiple boxes

0

Ship Separately

0

specification

Model LP-1 Shielded Loop Antenna

Frequency Range
530 kHz to 1610 kHz in 3 bands

Diameter
33"

Mounting
1/2" NPT

Connector
BNC

Attenuation
30 dB

Permissible Wind Load
150 mph, 100 mph with 3/4" ice

Belar AMMA-2

In stock

€2,966.32

Select options

Weight	4.5 kg
Product can be split into multiple boxes	0
Ship Separately	0
specification	Specifications: RF Frequency Range 150 kHz to 30 MHz RF Tuning Increments 1 kHz RF Sensitivity 1 to 10 volts rms RF Input Impedance 500 ohm or 50 ohm, internally connected Accuracy 1.0% Display Large Large 3 digit LED for Negative Modulation, 16-character alphanumeric LED display for menus and parameters Frequency Response ±0.1 dB, 30 Hz to 10.2 kHz -3dB @ 11.9kHz -100 dB @ 16 kHz Audio Outputs Audio Monitor +10 dBm, 600 ohm, balanced (XLR), NRSC or Flat Audio Test 2.5 V rms unbalanced (BNC) Frequency Response ±0.1 dB, 30 Hz to 10.2 kHz Distortion less than or equal to 0.1% @ 99% modulation IMD (SMPTE, CCIF, DIM) less than or equal to 0.1% @ 99% modulation Signal to noise ratio 75 dB Signal Delay Test: 3 ms., Meter: 90 ms. Automatic Carrier Level Adjustment range 25-150% Remote Meter Output Jack for optional MP-17 analog remote meter panel Remote Alarms Relays for Loss of Modulation Normal, Negative PPM, Positive PPM Loss of Carrier, Remote, and General alarms. Relays can be set NO or NC Serial Interface RS-232/RS-422 Unit Interface Wizard Standard Interface Power Requirements 20 watts, 100-240 Vac 50/60 Hz Dimensions 1 3/4"H x 14"D x 19"W (EIA rack mount) Shipping Weight 10 lbs (4.5 kg)
features	MEASUREMENTS: Positive Peak Modulation in Percent Negative Peak Modulation in Percent Positive Peaks-per-Minute Count Negative Peaks-per-Minute Count Positive Peak Average & Peak Min Modulation Negative Peak Average & Peak Min Modulation Positive Average/Peak Modulation Ratio Negative Average/Peak Modulation Ratio Normal Modulation Peaks-per-Minute Count AM Noise rms detected in dB Carrier Level Carrier Reference Carrier High in sliding 1 minute window Carrier Low in sliding 1 minute window Carrier Ratio High/Low in dB SETTABLE PARAMETERS: Positive & Negative Peak Modulation Indicator Positive & Negative Peaks/Minute Indicator Normal Modulation Indicator Positive & Negative Peaks/Minute Duration Audio Failure Alarm – Time & Modulation Modulation Mode (Normal/Fixed/MDCL/IMOD) MDCL Reference Carrier Shift Alarm Carrier Failure Alarm – Time & Level Display Hold Time Time Mode (Real/Past) Infinite Hold Audio Outputs (Test/Meter) Modulation Calibrator Tuning Frequency Tuning Mode (Dir/Auto/Scan/Lock) Tuning Frequency Increments

Belar FMMA-1

In stock

Call for Price

Add to Cart

Weight	5.4431 kg
features	MEASUREMENTS: Total Peak Modulation in Percent Peak Modulation expressed in kHz Deviation Peaks-per-Minute Count Loop-thru #1 Modulation Loop-thru #2 Modulation Peak Average Modulation Average/Peak Modulation Ratio Peak Minimum Modulation AM Noise (with Option 02) Synchronous AM Noise (with Option 02) RF Level (with Option 02) Pilot Modulation (requires FMS-2 or other source of filtered pilot) Pilot Injection (requires FMS-2 or other source of filtered pilot) SCA Injection (requires SCM-2 or other source of filtered SCA) SETTABLE PARAMETERS: Hold Time Peak Modulation Indicator Peaks-per-Minute Indicator Display Hold Display Blanking Peaks-per-Minute Duration Remote Enable Audio Failure Alarm – Time & Modulation Loop-thru #1 Gain (+20% Modulation) Loop-thru #2 Gain (+20% Modulation) Display Resolution (01% or 1%) Time Mode (Real/Past) Peak Weighting (8 time constants) Calibrator (with Option 01)
specification	SPECIFICATIONS: Accuracy: 0.1% Display: Large 4 digit LED for Total Modulation, 16 segment alphanumeric LED display for menus and parameters Input: Composite or 650 Khz IF (with Option 01) for use with Belar RFA-4, RFA-1A, or DC-4, or RF transmitter sample (with Option 01 and Option 02) Option 01: Precision FM Demodulator with Calibrator Input: 650 kHz IF (From RFA-4, RFA-1A, DC-4, or Option 02) Output: Two 75 ohm buffered, composite Signal/Noise: > 95dB Distortion (IM): < 0.003% Distortion (THD): Unmeasureable (< 0.01%) Option 02: Down Converter and Synchronous AM Noise Detector Frequency Range: 88 to 108 MHz Std. (Specify frequency) Input: 1-10 volts rms, 50 ohms, BNC connector Outputs: 650 kHz IF, 9-pin D connector to Wizard Signal/Noise: > 95 dB AM Noise Range: -17 to -80 dB Synchronous AM Noise Range: -17 to -80 dB
Ship Separately	0
Product can be split into multiple boxes	0

Belar FMHD-1

In stock

Call for Price

Add to Cart

Weight	6.8039 kg
features	Frequency Agile Antenna and High Level Inputs RF Spectrum Analysis with Mask and Sideband Power Measurements Metering of Analog Total, Pilot, L, R, L+R, and L−R Metering of HD L, R, L+R, L−R Audio Time Alignment Graphic Display Analysis ±16384 samples, ±375 ms to ±256 samples, ±5.8 ms Audio Polarity Level Alignment Graphic Display Analysis ±20.0 dB HD Control and Status Information HD SIS and PAD Data BER (Bit Error Rate) Measurements
specification	RF Inputs Antenna Input 87.5 to 108 MHz Frequency Agile 75 Ω, F Connector RF Inputs 87.5 to 108 MHz Frequency Agile 1 to 10 Vms, 50Ω, BNC Connector Composite Outputs Analog (2) +1.5 Vms@100%, 75Ω Unbalanced BNC Connector Digital (2) LVDS, 100Ω, RJ-45 Audio Outputs Analog (8 Channel Assignable) +10 dBm 600Ω Balanced, XLR Connector AES-3ID (6 Channel Assignable) 1.0 Vp-p 75 Ω, BNC Connector Headphone (L/R Assignable) 1/4” Phone Jack Computer Interface RS-232 9 pin Male D Sub Connector Ethernet 10/100 Base-T RJ-45 Connection Alarms Relays(4 Assignable) Form C, 15 pin Female D Connector Dimensions 2 EIA Rack Unit Power Requirements 40 Watts, 100-240V, 50/60 Hz Shipping Weight 15 lbs
Ship Separately	0
Product can be split into multiple boxes	0

Belar FMCS-1

In stock

Call for Price

Add to Cart

Weight	6.8 kg
Product can be split into multiple boxes	0
Ship Separately	0
specification	Metering Modulation (Peak, Ave, Min) Total, L, R, L+R, L!R 0 to 150%, 0.1% resolution Pilot 0 to 15.0%, 0.1% resolution RMS Total, L, R, L+R, L!R +3.0 to !120.0 dB, 0.1 dB resolution Flat & 50 µs or 75 µs AM Noise, Sync AM Noise 0.0 to -100.0 dB, 0.1 dB resolution Separation 0.0 to !120.0 dB, 0.1 dB Crosstalk 0.0 to !120.0 dB, 0.1 dB resolution Composite Outputs Analog (2 buffered) 1.5 Vrms @ 100%, 75Ω unbalanced BNC Connector Digital (2 buffered) LVDS, 100Ω, RJ-45 Connector Audio Outputs Analog Outputs (6 assignable) +10 dBm, 600Ω balanced XLR Connector Analog Outputs (2 assignable) 5 Vrms, 75Ω unbalanced BNC Connector AES-3ID (8 assignable) 1.0 Vpk-pk, 75Ω, BNC Connector Headphone (assignable) 1/4" Phone Jack Alarm Outputs Relays (4 assignable) FORM C, 15-pin Female D-Sub Connector Computer Interface USB Port Ethernet 10/100 Base -T RJ-45 Jack Dimensions 19"x3.5"x14.5", 2 EIA Rack Units Power Requirements 40 Watts, 100-240V 50/60 Hz Shipping Weight 15 lbs (6.8 kg)
features	Frequency Agile RF input AM & Sync AM Noise measurements HD RF carrier rejections filters to improve analog readings in the presence of HD carriers. FM Demodulation with 100 dB 75 µsec SNR Variable Bandwidth Composite Filtering Stereo Demodulation with 100 dB L/R Separations Full metering of Analog Peak and RMS values RDS Injection/Phase and Full Data decoding Two SCA Decoders RF, Composite, and Audio FFT Spectrum Analysis RJ-45 Ethernet Interface with remote PC software

Solidyne 542APC

In stock

€2,492.70

Select options

Weight	5 kg
Product can be split into multiple boxes	0
Ship Separately	0
specification	Technical Specifications Analog Input 600/10 K balanced XLR 50 dB CM Rejection 20-15 Khz. Input level selected by software in 1 dB steps. Sigma-Delta converters 24 bits / 192 Khz Digital Input Optional AES-3 digital balanced input Z=110 ohms. Automatic selection of 32, 44, 1, 48, 96 & 192 Khz with sample rate converter (128 dB Dynamic Range, -117 dB THD) to avoid jitter Analog Output 600 balanced XLR, output level +4 dBm Sigma-Delta converters 24 bits / 192 Khz Digital Output Optional AES-3 digital balanced output, Z=110 ohms FS=48 or 96 Khz, selected by software MPX Output From 2 Vpp to 5 Vpp in 0.2 steps Processing Technology DSP (Digital Signal Processing). Total CPU power 2.700 MIPS MPX Post-Processing SuperModulation exclusive Solidyne technology, at 608 Khz oversampling. Fast clipper DC-10 Mhz wideband channel to avoid audible artifacts Frequency Response 20-15.000 Hz +/-0.25 dB. Flat mode XLR out or digital AES-3 Out. Output without pre-emphasis Harmonic Distortion (THD) THD below 0.008 % (30-15 Khz, Flat Mode) Noise Dynamic Range= 95 dBA Stereo Separation 75 dBA @ 1 KHz: > 65 dBA @ 30-15.000 Hz Subsonic Filter Chebyshev FC=20 Hz 25 dB rejection at 10 Hz Asymmetry Canceling Phase processing technology with Kahn-Bonello algorithms. Cancelling Factor=8:1 Linear Expander Range=20 dB Attack & Release time software controlled Gated Wide-Band AGC Range=30 dB. Attack / Release time & Threshold controlled from LCD screen Multiband Compressors DSP controlled. Five Bands, Crossover= 24dB/oct Max compression = 30dB. Slope = 10:1 Compressors Attack/Release Time Attack and Release controlled separately IM Canceled Clipper IM canceling factor : greater than 30 dB below 250 Hz Fast Clipper Four channels, absolutely alias free using DC-10 Mhz bandwidth channel Density Equalizer Four bands density equalizer with 15 dB range at the output of multiband compressors Low pass filter 15 Khz digital low pass FIR filter, 60 dB rejection at 19 Khz Storage of Preset Settings 30 programs that can be changed on-air from PC computer using the 462dsp serial port RS-232 PC control RS232 serial port. It can be connected to USB bus with optional external adapter. Optional Ethernet bus connection Super Modulation MPX processing for stereo interleaving, allows for 130% L & R audio level at 100% modulation RS-232 PC control Yes. It includes free Windows 2000/XP software AM FM compatible The user can change the processor's AM/FM firmware chips. Only two socket mounted Flash EPROM IC's have to be replaced. Stereo coder is a separate module Processing Bands and stages Five processing bands / Nine processing stages LCD Display Blue color, LCD display with backlight. Graphic type Resolution 240 x 64 RDS Encoder Optional built in RDS encoder Power 90/127V and 190/230V; 50/60 Hz, selectable from rear panel Dimensions 483 mm Wide 240 mm Deep, 88 mm High

TEM Opera plus 1kW

In stock

€4,135.00

Select options

Weight	35 kg
Dimensions	60 × 74 × 40 cm
video	0
Product can be split into multiple boxes	0
Ship Separately	0
specification	General Specification Operating voltage 230VAC ±15% min Cooling Forced air </tr Line power < 1400VA </tr Operational temperature range -5° to 50°C </tr Storage temperature range -20° to 60°C </tr Output RF connector 7/16 </tr Monitor RF connecto BNC </tr Dimensions 485×133, 2x625mm </tr Weight 15 kg </tr Radio Frequency Frequency range 87.5 to 108MHz Frequency setting in 10KHz or 100 KHz steps Setting mode By keys on the front panel/Remote Frequency stability < ±500Hz/year Frequency generation PLL synthesizer Modulation type direct VCO frequency modul. F3 Nominal frequency deviation ±75KHz Deviation linearity in all freq. range ±5KHz RF output power 1000 W ± 1dB Harmonics emission <-70dBc Spurious emission <-95dBc Modulation Capability MONO (left and right) 30Hz to 15KHz STEREO (L-R & AES-EBU) 30Hz to 53KHz </tr SCA + RDS 30Hz to 100KHz </tr Composite Mono or Stereo + SCA + RDS </tr MPX Characteristics Signal input MPX Composite Input impedance 10Kohm unbalanced </tr Input connector BNC </tr Input level Adjustable (Front/Remote) </tr Audio freq. response (30Hz to 60KHz) < 0, 5 dB </tr Modulation distortion <0.2% </tr Signal to noise ratio >75dB </tr Stereo Characteristics Signal inputs Left or Right – AES-EBU Input impedance 600ohm (bal.) or 10k ohm Input connectors Canon XLR Unbalance rejection >40dB Input leve Adjustable (Front/Remote) Pre-emphasis 75 or 50uS Audio frequency response (30Hz to 15KHz) <0.25dB Audio frequency response (19KHz to 100KHz) >50dB Cross-talk between left and right channel >50dB Distortion at frequency deviation of 75KHz <0.1% Signal to noise referred at deviation of 75KHz >75dB Suppression of 38KHz >50dB Spurious suppression outside band in according to ETS 300-384
Color	Black
features	Amplifier RF broadband technology with LD-Mos Modulator with digital frequency synthesizer. Stereo encoder, RDS, AES-ABU and Audio Automatic change-over Protection against increased ROS antenna with automatic reduction of output power (fold-back) Temperature protection with power reduction (fold-back) LCD display for control of the main parameters 1 amplifier 1250W for maximum affidabilitàsu single radiator Switching Power Supply for maximum reliability and efficiency (SMPS) Air duct cooling 2 fans easily replaceable Harmonic filter and directional coupler incorporated Rack 19" 3 Units Telemetry GSM & TCP / IP with Webserver – Headphone Jack

TEM Opera plus 2kW

In stock

€6,270.00

Select options

Weight	35 kg
Dimensions	74 × 62 × 40 cm
Product can be split into multiple boxes	0
video	0
Ship Separately	0
specification	General Specification Operating voltage 230VAC ±15% min Cooling Forced Air Line power < 2800VA Operational temperature range -5° to 50°C Storage temperature range -20° to 60°C Output RF connector 7/16” Monitor RF connector BNC Dimensions 485×133, 2x625mm Weight 16 kg Radio Frequency Frequency range 87.5 to 108MHz Frequency setting in 10KHz or 100 KHz steps Setting mode By keys on the front panel/Remote Frequency stability < ±500Hz/year Frequency generation PLL synthesizer Modulation type direct VCO frequency modul. F3 Nominal frequency deviation ±75KHz Deviation linearity in all freq. range ±5KHz RF output power 2000 W ± 1 d B Harmonics emission <-70dBc Spurious emission <-95dBc Modulation Capability MONO (left and right) 30Hz to 15KHz STEREO (L-R & AES-EBU) 30Hz to 53KHz SCA + RDS 30Hz to 100KHz Composite Mono or Stereo + SCA + RDS MPX Characteristics Signal input MPX Composite Input impedance 10Kohm unbalanced Input connector BNC Input level Adjustable (Front/Remote) Audio freq. response (30Hz to 60KHz) < 0, 5 dB Modulation distortion <0.2% Signal to noise ratio >75dB Stereo Characteristics Signal inputs Left or Right – AES-EBU Input impedance 600ohm (bal.) or 10k ohm Input connectors Canon XLR Unbalance rejection >40dB Input leve Adjustable (Front/Remote) Pre-emphasis 75 or 50uS Audio frequency response (30Hz to 15KHz) <0.25dB Audio frequency response (19KHz to 100KHz) >50dB Cross-talk between left and right channel >50dB Distortion at frequency deviation of 75KHz <0.1% Signal to noise referred at deviation of 75KHz >75dB Suppression of 38KHz >50dB Spurious suppression outside band in according to ETS 300-384
features	ECO LINE – HIGH EFFICIENCY TRANSMITTER Wideband circuits amplifiers with LD-Mos technology Built-in exciter with digital frequency synthesiser Stereo encoder, RDS, AES-ABU and Audio change-over built-in Automatic fold-back ROS protection Fold-back temperature protection LCD display to check all operating parameters 2x1250W amplifier in only one heat-sink for highest reliability Switching-mode Power Supply – Efficiency >95% Sealed duct cooling air with blowers Easy removable blowers Harmonics filter & directional coupler built-in 3 unit 19” standard rack GSM Telemetry & TCP/IP Webserver Headphone jack on front panel
Color	Black

TEM Opera plus 3500W

In stock

€9,226.00

Select options

Weight	80 kg
Dimensions	60 × 74 × 40 cm
Color	Black
features	ECO LINE – HIGH EFFICIENCY TRANSMITTER Wideband circuits amplifiers with LD-Mos technology Built-in exciter with digital frequency synthesiser Stereo encoder, RDS, AES-ABU and Audio change-over built-in Automatic fold-back ROS protection Fold-back temperature protection LCD display to check all operating parameters 3x1250W amplifier in only one heat-sink for highest reliability 3xSwitching-mode Power Supply – Efficiency >95% Sealed duct cooling air with blowers Easy removable blowers Harmonics filter & directional coupler built-in 3 unit 19” standard rack GSM Telemetry & TCP/IP Webserver Headphone jack on front panel
specification	General Specification Operating voltage 400VAC ±15% 3phases or 230VAC ±10% Monophase Cooling Forced air Line power < 4300VA Operational temperature range -5° to 50°C Storage temperature range -20° to 60°C Output RF connector 7/8” Monitor RF connector BNC Dimensions 485×310, 8x625mm Weight 55 kg Radio Frequency Frequency range 87.5 to 108MHz Frequency setting in 10KHz or 100 KHz steps Setting mode By keys on the front panel/Remote Frequency stability < ±500Hz/year Frequency generation PLL synthesizer Modulation type direct VCO frequency modul. F3 Nominal frequency deviation ±75KHz Deviation linearity in all freq. range ±5KHz RF output power 3000 W ± 1 d B Harmonics emission <-70dBc Spurious emission <-95dBc Modulation Capability MONO (left and right) 30Hz to 15KHz STEREO (L-R & AES-EBU) 30Hz to 53KHz SCA + RDS 30Hz to 100KHz Composite Mono or Stereo + SCA + RDS MPX Characteristics Signal input MPX Composite Input impedance 10Kohm unbalanced Input connector BNC Input level Adjustable (Front/Remote) Audio freq. response (30Hz to 60KHz) < 0, 5 dB Modulation distortion <0.2% Signal to noise ratio >75dB Stereo Characteristics Signal inputs Left or Right – AES-EBU Input impedance 600ohm (bal.) or 10k ohm Input connectors Canon XLR Unbalance rejection >40dB Input leve Adjustable (Front/Remote) Pre-emphasis 75 or 50uS Audio frequency response (30Hz to 15KHz) <0.25dB Audio frequency response (19KHz to 100KHz) >50dB Cross-talk between left and right channel >50dB Distortion at frequency deviation of 75KHz <0.1% Signal to noise referred at deviation of 75KHz >75dB Suppression of 38KHz >50dB Spurious suppression outside band in according to ETS 300-384
Ship Separately	0
Product can be split into multiple boxes	0
video	0

TEM Opera plus 4000W

In stock

€10,563.00

Select options

Weight	80 kg
Dimensions	62 × 74 × 60 cm
video	0
Product can be split into multiple boxes	0
Ship Separately	0
specification	General Specification Operating voltage 400VAC ±15% 3phases or 230VAC ±10% Monophase Cooling Forced air Line power < 5600VA Operational temperature range -5° to 50°C Storage temperature range -20° to 60°C Output RF connector 7/8” Monitor RF connector BNC Dimensions 485×310, 8x625mm Weight 55 kg Radio Frequency Frequency range 87.5 to 108MHz Frequency setting in 10KHz or 100 KHz steps Setting mode By keys on the front panel/Remote Frequency stability < ±500Hz/year Frequency generation PLL synthesizer Modulation type direct VCO frequency modul. F3 Nominal frequency deviation ±75KHz Deviation linearity in all freq. range ±5KHz RF output power 4000 W ± 1 d B Harmonics emission <-70dBc Spurious emission <-95dBc Modulation Capability MONO (left and right) 30Hz to 15KHz STEREO (L-R & AES-EBU) 30Hz to 53KHz SCA + RDS 30Hz to 100KHz Composite Mono or Stereo + SCA + RDS MPX Characteristics Signal input MPX Composite Input impedance 10Kohm unbalanced Input connector BNC Input level Adjustable (Front/Remote) Audio freq. response (30Hz to 60KHz) < 0, 5 dB Modulation distortion <0.2% Signal to noise ratio >75dB Stereo Characteristics Signal inputs Left or Right – AES-EBU Input impedance 600ohm (bal.) or 10k ohm Input connectors Canon XLR Unbalance rejection >40dB Input leve Adjustable (Front/Remote) Pre-emphasis 75 or 50uS Audio frequency response (30Hz to 15KHz) <0.25dB Audio frequency response (19KHz to 100KHz) >50dB Cross-talk between left and right channel >50dB Distortion at frequency deviation of 75KHz <0.1% Signal to noise referred at deviation of 75KHz >75dB Suppression of 38KHz >50dB Spurious suppression outside band in according to ETS 300-384
Color	Black
features	ECO LINE – HIGH EFFICIENCY TRANSMITTER Wideband circuits amplifiers with LD-Mos technology Built-in exciter with digital frequency synthesiser Stereo encoder, RDS, AES-ABU and Audio change-over built-in Automatic fold-back ROS protection Fold-back temperature protection LCD display to check all operating parameters 6x8000W amplifier in only one heat-sink for highest reliability 3xSwitching-mode Power Supply – Efficiency >95% Sealed duct cooling air with blowers Easy removable blowers Harmonics filter & directional coupler built-in 3 unit 19” standard rack GSM Telemetry & TCP/IP Webserver Headphone jack on front panel

TEM Opera plus 5000W

In stock

€16,770.00

Select options

Weight	80 kg
Dimensions	74 × 62 × 60 cm
Product can be split into multiple boxes	0
video	0
Ship Separately	0
specification	General Specification Operating voltage 400VAC ±15% 3phases or 230VAC ±10% Monophase Cooling Forced air Line power < 7100VA Operational temperature range -5° to 50°C Storage temperature range -20° to 60°C Output RF connector 7/8” Monitor RF connector BNC Dimensions 485×310, 8x625mm Weight 55 kg Radio Frequency Frequency range 87.5 to 108MHz Frequency setting in 10KHz or 100 KHz steps Setting mode By keys on the front panel/Remote Frequency stability < ±500Hz/year Frequency generation PLL synthesizer Modulation type direct VCO frequency modul. F3 Nominal frequency deviation ±75KHz Deviation linearity in all freq. range ±5KHz RF output power 5000 W ± 1 d B Harmonics emission <-70dBc Spurious emission <-95dBc Modulation Capability MONO (left and right) 30Hz to 15KHz STEREO (L-R & AES-EBU) 30Hz to 53KHz SCA + RDS 30Hz to 100KHz Composite Mono or Stereo + SCA + RDS MPX Characteristics Signal input MPX Composite Input impedance 10Kohm unbalanced Input connector BNC Input level Adjustable (Front/Remote) Audio freq. response (30Hz to 60KHz) < 0, 5 dB Modulation distortion <0.2% Signal to noise ratio >75dB Stereo Characteristics Signal inputs Left or Right – AES-EBU Input impedance 600ohm (bal.) or 10k ohm Input connectors Canon XLR Unbalance rejection >40dB Input leve Adjustable (Front/Remote) Pre-emphasis 75 or 50uS Audio frequency response (30Hz to 15KHz) <0.25dB Audio frequency response (19KHz to 100KHz) >50dB Cross-talk between left and right channel >50dB Distortion at frequency deviation of 75KHz <0.1% Signal to noise referred at deviation of 75KHz >75dB Suppression of 38KHz >50dB Spurious suppression outside band in according to ETS 300-384
features	ECO LINE – HIGH EFFICIENCY TRANSMITTER Wideband circuits amplifiers with LD-Mos technology Built-in exciter with digital frequency synthesiser Stereo encoder, RDS, AES-ABU and Audio change-over built-in Automatic fold-back ROS protection Fold-back temperature protection LCD display to check all operating parameters 6x1250W amplifier in only one heat-sink for highest reliability 3xSwitching-mode Power Supply – Efficiency >95% Sealed duct cooling air with blowers Easy removable blowers Harmonics filter & directional coupler built-in 3 unit 19” standard rack GSM Telemetry & TCP/IP Webserver Headphone jack on front panel
Color	Black

TEM Dual Cast M-VISION

In stock

Call for Price

Add to Cart

Weight	14 kg
specification	TRANSMITTERS UHF digital output power: up to 400 W rms @ MER 38 dB typ. (DVB, ISDB) UHF analogue output power: up to 600 W p.s. VHF Digital output power: up to 250 W rms @ MER 37 dB typ. (DVB, ISDB) VHF analogue output power: up to 665000 WW rpm.ss. Frequency agility: UHF Band IV and V or VHF Band III Frequency resolution: 1 Hz Pre-correction: Adaptive RF connector: 7/16 (f), 50 Ohm MODULATOR DVB-T/-H/-T2 Standard: EN300744, EN302304, EN302755, TS101191, TS102773 (T2-MI), TS102034 Inputs: 4x ASI BNC (f), 75 Ohm or 2x ASI BNC (f), 75 Ohm and 2x RJ45 TS oIP 10/100/1000 Switch seamless between ASI inputs. Hierarchical and not hierarchical (DVB-T) FFT: 1K (DVB-T2), 2K, 4K, 8K, 8K ext. (DVB-T2), 16K & 16K ext. (DVB-T2), 32K & 32K ext. (DVB-T2) Code rate: All modalities available according to the standard Block Short or Normal (DVB-T2) DVB-T: Reed-Solomon (204, 188) DVB-T2: BCH, LDPC Guard interval: 1/32, 1/16, 1/8, 1/4, 19/256 (DVB-T2), 19/128 (DVB-T2), 1/128 (DVB-T2) Constellation: QPSK, 16QAM, 64QAM, 256QAM (DVB-T2). Rotated and non rotated (DVB-T2) MISO processing: Supported ISDB-Tb Standard: ABNT NBR 15601, ABNT NBR 15603 Inputs: 4x ASI TS/BTS BNC (f), 75 Ohm or 2x ASI TS/BTS BNC (f), 75 Ohm and 2x RJ45 TS/BTS oIP 10/100/1000 FFT: Mode 1 (2K), Mode 2 (4K), Mode 3 (8K) Code rate: 1/2, 2/3, 3/4, 5/6, 7/8 Guard interval: 1/4, 1/8, 1/16, 1/32 Hierarchical modulation: Up to 3 layers Constellation: QPSK, 16QAM, 64QAM Time interleaver: Fully supported Partial reception: Supported DAB/DAB+/T-DMB Standard: EN 300401, ETS 300 799 Inputs: 4x ETI (NI[G703], NA5376[G704] or NA5592[G704]) BNC (f), 75 Ohm Transmission modes: Mode I, II, III, IV (Automatically detected from the ETI stream, or user selectable) Operation: MFN or SFN operations ATSC Standard: A/53, A/110 Inputs: 4x ASI / SMPTE-310M BNC (f), 75 Ohm or 2x ASI / SMPTE-310M BNC (f), 75 Ohm and 2x RJ45 TS oIP 10/100/1000 Modulation: 8-VSB Input bit rate: 19.39 Mbit/s Bandwidth: 6 MHz Max processing delay: Up to 1 second (programmable) Analogue Standard: B, G, D, K, M, N, I Inputs: Video BNC (f), 75 Ohm, audio Tini-QG “Mini XLR”, 6 Pin (m), 600 Ohm Color system: PAL, NTSC SATELLITE RECEIVER (Option) Standard: ETSI EN 300 421 (QPSK) (DVB-S) ETSI EN 302 307 (QPSK, 8PSK, 16APSK) (DVB-S2) ETSI EN 50083-9 (ASI) ETSI EN 50221 (Common Interface) DVB-S2: VCM, CCM, Multi Stream and Single Stream, Normal & Short FEC frames Symbol rate: 1 – 45 Msym/s (DVB-S) 2 – 45 Msym/s (DVB-S2) Constellation: QPSK, 8PSK, 16APSK FEC: Automatic, all modalities available according to the standard Block Short or Normal DVB-S: Reed-Solomon (204, 188) DVB-S2: BCH, LDPC Roll–Off: 0.2, 0.25, 0.35 Input connector: F (f), 75 Ohm Frequency: L–band 930÷2250 MHz LNB control voltage: Off, +13/18 Vdc, 22 kHz, 0.25 A (overload protection) RF input level: 40 ÷ 100 db/μV (with attenuator) Output connector: BNC (f), 75 Ohm Modality: 188 bytes Max input bit rate: 80 Mbps (CAM limit: 72 Mbps) CAM interface: PCMCIA DVB-CI Common Interface CA mode (Conditional Access): Multicrypt, Simulcrypt CAS support: Mediaguard, Viaccess, Irdeto, Conax, BISS with Professional multiprogram CAM (descrambling of up to 24 Elementary Streams) Betacrypt, Cryptoworks, Nagravision with standard consumer CAM (descrambling of up to 4 services) GPS / GLONASS (Option) Input connector: N (f), 50 Ohm Input/Monitor output 10 MHz: BNC (f), 75 Ohm Input/Monitor output 1 PPS: BNC (f), 75 Ohm Phase noise: -140 dBc/Hz @ 10 kHz -150 dBc/Hz @ 100 kHz Stability: 1e-12 / 24 H with disciplined OCXO Hold-over stability: 5 μs after 5 hours (optional 1 μs after 24 hours) MECHANICAL Chassis: 2U rack 19” Width: 482 mm Height: 87.1 mm Depth: 460.5 mm without fans Weight: 14 Kg CONTROLS TFT touchscreen Web GUI SNMP GPIO ENVIRONMENTAL Operating temperature range: -5°C ÷ 40°C Max. relative humidity: 90% non condensing Max. operating altitude: 2500 m. a.s.l. (>2500 m. optional) ELECTRICAL Power supply: Single Phase 100÷240 V~ 50/60 Hz, IEC320 C20 Plug Efficiency: Up to 40% efficiency in digital (UHF models)
Ship Separately	0
Color	Black
features	Compact 2U 19 Rack chassis Output Power up to 400W rms in digital or up to 600W p.s. in analogue High efficiency broadband amplifier technology DVB-T/H/T2, ISDB-T/Tb, DAB/DAB+/T-DMB, ATSC, PAL, NTSC modulations fully supported Embedded Re-Multiplexer/Layer Combiner/TS to BTS (188 to 204 byte) converter for ISDBTb Adaptive pre-correction circuits Powerful echo canceller when OneDriver is used as an on-channel repeater Optional high-performance additional echo cancellation circuit On-board high stability GPS / GLONASS receiver with battery Flexible input interfaces:- 4 x ASI inputs (TS, BTS, T2MI, SMPTE-310M) + Analog input- 2 x ASI inputs and 2 x Gigabit Ethernet- 1 x DVB-S/S2 Satellite Receiver input- 1 x RF input SNMP, Web Interface and Touch Screen display
Product can be split into multiple boxes	0
Robots Meta Tag	0
Main Store for Canonical Url	0
video	0
Main Category for SEO	0

TEM Opera Plus 10W

In stock

€1,525.00

Select options

Weight	13 kg
Dimensions	56 × 65 × 12 cm
Product can be split into multiple boxes	0
video	0
Ship Separately	0
specification	General Specification Operating voltage 100V ÷ 240V Cooling Forced air Line power 90-250V AC Operational temperature range -5° to 50°C Storage temperature range -20° to 60°C Output RF connector “N” Monitor RF connector BNC Dimensions 485×44, 4x625mm Weight 6/8 kg Radio Frequency Frequency range 87.5 to 108MHz Frequency setting in 10KHz or 100 KHz steps Setting mode By keys on the front panel/Remote Frequency stability < ±500Hz/year Frequency generation PLL synthesizer Modulation type direct VCO frequency modul. F3 Nominal frequency deviation ±75KHz Deviation linearity in all freq. range ±5KHz RF output power 20 W ± 1dB Harmonics emission <-70dBc Spurious emission <-95dBc Modulation Capability MONO (left and right) 30Hz to 15KHz STEREO (L-R & AES-EBU) 30Hz to 53KHz SCA + RDS 30Hz to 100KHz Composite Mono or Stereo + SCA + RDS MPX Characteristics Signal input MPX Composite Input impedance 10Kohm unbalanced Input connector BNC Input level Adjustable (Front/Remote) Audio freq. response (30Hz to 60KHz) < 0, 5 dB Modulation distortion <0.2% Signal to noise ratio >75dB Stereo Characteristics Signal inputs Left or Right – AES-EBU Input impedance 600ohm (bal.) or 10k ohm Input connectors Canon XLR Unbalance rejection >40dB Input leve Adjustable (Front/Remote) Pre-emphasis 75 or 50uS Audio frequency response (30Hz to 15KHz) <0.25dB Audio frequency response (19KHz to 100KHz) >50dB Cross-talk between left and right channel >50dB Distortion at frequency deviation of 75KHz <0.1% Signal to noise referred at deviation of 75KHz >75dB Suppression of 38KHz >50dB Spurious suppression outside band in according to ETS 300-384
features	Transmitter ECO-LINE HIGH EFFICIENCY Amplifiers RF broadband technology with LD-MOS Modulator with digital frequency synthesizer. Stereo encoder, RDS, AES-ABU Audio and change-over Protection against increased ROS antenna with automatic reduction of output power (fold-back) Temperature protection with power reduction (fold-back) LCD display for control of the main parameters Amplifiers 50-100W for maximum affidabilitàsu single radiator Switching Power Supply for maximum reliability and efficiency (SMPS) Air duct cooling Fans can be easily replaced Harmonic filter and directional coupler incorporated Rack 19" 1 Unit Telemetry GSM & TCP / IP with Webserver – Headphone Jack
Color	Black

Wisycom RPU300

In stock

€0.00

Select options

Signup for our newsletter and receive a 5% coupon code for your next order

+44 (0) 7421 388981

Customer Service

Useful Links

About